[Users] vlan on mgmt network

[Assaf Muller]

Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond,
then the management network has to be non-VM. IE: You won't be able to connect instances to the management
network.


Assaf Muller, Cloud Networking Engineer 
Red Hat 

----- Original Message -----
From: "William Kwan" <potatok at yahoo.com>
To: "Assaf Muller" <amuller at redhat.com>
Cc: users at ovirt.org, "Christian Hernandez" <christianh at 4over.com>
Sent: Thursday, January 16, 2014 7:59:46 PM
Subject: Re: [Users] vlan on mgmt network

Assaf,

Thanks a lot.   Will I be able to mix tagged and untagged traffic?

Example:
- bond0 on my two systems are on the management network, untagged
- my VMs all have one connection to this management network
- I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN


This will work it out?
Thanks
Will




On Thursday, January 16, 2014 12:26 PM, Assaf Muller <amuller at redhat.com> wrote:
 
You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place
as many VM, tagged networks as you'd like on the same NIC or bond.

Here's a working upgrade procedure:
1) Edit ovirtmgmt, mark it as non-VM.
2) Go to all hosts using this network, select Setup Host Networks. You'll see that
   ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :)
   Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4
3) Create VM, VLAN networks
4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on
   bond0.

You don't need to do any prep work on your hosts before this procedure. oVirt will take care
of this stuff for you.


Assaf Muller, Cloud Networking Engineer 
Red Hat 

----- Original Message -----
From: "Christian Hernandez" <christianh at 4over.com>
To: "William Kwan" <potatok at yahoo.com>
Cc: users at ovirt.org
Sent: Thursday, January 16, 2014 6:36:49 PM
Subject: Re: [Users] vlan on mgmt network

Assuming it's on the same VLAN... 

I would make the subinterface (i.e. bond0.1) 


Thank you, 

Christian Hernandez 
1225 Los Angeles Street 
Glendale, CA 91204 
Phone: 877-782-2737 ext. 4566 
Fax: 818-265-3152 
christianh at 4over.com <mailto: christianh at 4over.com > 
www.4over.com < http://www.4over.com > 


On Thu, Jan 16, 2014 at 8:31 AM, William Kwan < potatok at yahoo.com > wrote: 



Hi all, 

CentOS 6.5 and oVirt 3.3 

Let's say I have bond0 (eth0 and eth1) on a management network. 
Logical network ovirtmgmt is set and working on top of Interfaces bond0. 

Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0? 

Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface? 

Wil 


_______________________________________________ 
Users mailing list 
Users at ovirt.org 
http://lists.ovirt.org/mailman/listinfo/users 




_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users