[Users] vlan on mgmt network

[Itamar Heim]

On 01/16/2014 08:35 PM, Assaf Muller wrote:
> Ok so if you want to set the management network (untagged) and VM networks (tagged) on the same bond,
> then the management network has to be non-VM. IE: You won't be able to connect instances to the management
> network.

William - did this work for you followin assaf steps below? you don't 
need to change anything at host level, all should be done from the webadmin

>
>
> Assaf Muller, Cloud Networking Engineer
> Red Hat
>
> ----- Original Message -----
> From: "William Kwan" <potatok at yahoo.com>
> To: "Assaf Muller" <amuller at redhat.com>
> Cc: users at ovirt.org, "Christian Hernandez" <christianh at 4over.com>
> Sent: Thursday, January 16, 2014 7:59:46 PM
> Subject: Re: [Users] vlan on mgmt network
>
> Assaf,
>
> Thanks a lot.   Will I be able to mix tagged and untagged traffic?
>
> Example:
> - bond0 on my two systems are on the management network, untagged
> - my VMs all have one connection to this management network
> - I want to setup a new VM with two interfaces, one on the management network, one on the tagged VLAN
>
>
> This will work it out?
> Thanks
> Will
>
>
>
>
> On Thursday, January 16, 2014 12:26 PM, Assaf Muller <amuller at redhat.com> wrote:
>
> You can make ovirtmgmt a non-VM, untagged (non-VLAN) network, then place
> as many VM, tagged networks as you'd like on the same NIC or bond.
>
> Here's a working upgrade procedure:
> 1) Edit ovirtmgmt, mark it as non-VM.
> 2) Go to all hosts using this network, select Setup Host Networks. You'll see that
>     ovirtmgmt is out of sync. Edit the network and mark sync. Hit ok on the dialog of course :)
>     Step 2 will be done for you automatically when you edit logical networks in oVirt 3.4
> 3) Create VM, VLAN networks
> 4) Go to all hosts you wish to place those networks, and drag the new VLAN networks on
>     bond0.
>
> You don't need to do any prep work on your hosts before this procedure. oVirt will take care
> of this stuff for you.
>
>
> Assaf Muller, Cloud Networking Engineer
> Red Hat
>
> ----- Original Message -----
> From: "Christian Hernandez" <christianh at 4over.com>
> To: "William Kwan" <potatok at yahoo.com>
> Cc: users at ovirt.org
> Sent: Thursday, January 16, 2014 6:36:49 PM
> Subject: Re: [Users] vlan on mgmt network
>
> Assuming it's on the same VLAN...
>
> I would make the subinterface (i.e. bond0.1)
>
>
> Thank you,
>
> Christian Hernandez
> 1225 Los Angeles Street
> Glendale, CA 91204
> Phone: 877-782-2737 ext. 4566
> Fax: 818-265-3152
> christianh at 4over.com <mailto: christianh at 4over.com >
> www.4over.com < http://www.4over.com >
>
>
> On Thu, Jan 16, 2014 at 8:31 AM, William Kwan < potatok at yahoo.com > wrote:
>
>
>
> Hi all,
>
> CentOS 6.5 and oVirt 3.3
>
> Let's say I have bond0 (eth0 and eth1) on a management network.
> Logical network ovirtmgmt is set and working on top of Interfaces bond0.
>
> Is it possible to have another Logical network, e.g. ovirt777, on the same Interface bond0?
>
> Or I should add a virtual interface, e.g. bond0.1, tie it to VLAN 777 and create logical network with this virtual interface?
>
> Wil
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>