[Users] VM Migration failed
Edgars M.
edgars.mazurs at gmail.com
Mon Jan 20 11:28:37 UTC 2014
Thanks for explanation. Better, more descriptive UI error message would
save our time :)
Edgars
On Mon, Jan 20, 2014 at 11:53 AM, Dafna Ron <dron at redhat.com> wrote:
> I can explain the cause :)
>
> when disk is first device, and the iso is unreachable the vm should not
> start (you can try it... create a new vm, give it an iso -> deactivate the
> iso domain -> try to start the vm -> you will get an error in UI).
>
> the vm configuration's boot sequence is a set one. it will not change if
> you eject the cd... so next time you try to run the vm it will still try to
> boot from the disk you ejected.
>
> when you ran the vm, there is an xml file sent to libvirt and that is the
> vm configuration. even if you ejected the cd, the boot sequence in the xml
> still has the cd as first boot device. hence, when we try to re-create the
> vm in the target host, we will try to create the vm with the cd as first
> device -> it does not exists anymore -> we get an exception and fail
> migration.
>
>
>
> On 01/20/2014 10:38 AM, Edgars M. wrote:
>
>> Ok, so I shut down VM, unchecked Attach CD, powered on VM and now
>> migration succeeded. Go figure.
>>
>> Thanks everyone for your help! I still dont know what is the cause of
>> this issue, but at least I know how to fix it.
>>
>> Edgars
>>
>>
>> On Mon, Jan 20, 2014 at 11:26 AM, Edgars M. <edgars.mazurs at gmail.com<mailto:
>> edgars.mazurs at gmail.com>> wrote:
>>
>> No, I did not that, but I did Eject under Change CD.
>>
>> Edgars
>>
>>
>> On Mon, Jan 20, 2014 at 11:24 AM, Dafna Ron <dron at redhat.com
>> <mailto:dron at redhat.com>> wrote:
>>
>> so if you selected it as first boot device, after you
>> installed did you shut down the vm and remove the vm from the
>> boot?
>>
>>
>> On 01/20/2014 10:21 AM, Edgars M. wrote:
>>
>> Hi
>>
>> I specified ISO image and chose CD-ROM as first boot device.
>>
>> Edgars
>>
>>
>> On Mon, Jan 20, 2014 at 11:19 AM, Dafna Ron
>> <dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>> wrote:
>>
>> when you booted the vm's for the first time, did you
>> specify the
>> ISO in vm's boot sequence or did you use run-once?
>>
>>
>> On 01/20/2014 09:53 AM, Edgars M. wrote:
>>
>> Hi again
>>
>> I tried to reproduce this issue and unfortunately
>> I couldn't.
>> So there must be something else, but I cannot
>> figure out what
>> is wrong, because it is happening only with some VMs.
>> Nonetheless I attached new log files to investigate.
>>
>> And here is some more info:
>> ovirt-engine-setup-3.3.2-1.el6.noarch
>> ovirt-engine-webadmin-portal-3.3.2-1.el6.noarch
>> ovirt-host-deploy-java-1.1.2-1.el6.noarch
>> ovirt-engine-restapi-3.3.2-1.el6.noarch
>> ovirt-image-uploader-3.3.1-1.el6.noarch
>> ovirt-release-el6-10-1.noarch
>> ovirt-engine-userportal-3.3.2-1.el6.noarch
>> ovirt-engine-backend-3.3.2-1.el6.noarch
>> ovirt-engine-websocket-proxy-3.3.2-1.el6.noarch
>> ovirt-engine-dbscripts-3.3.2-1.el6.noarch
>> ovirt-log-collector-3.3.1-1.el6.noarch
>> ovirt-engine-sdk-python-3.3.0.8-1.el6.noarch
>> ovirt-engine-cli-3.3.0.6-1.el6.noarch
>> ovirt-engine-tools-3.3.2-1.el6.noarch
>> ovirt-iso-uploader-3.3.1-1.el6.noarch
>> ovirt-engine-lib-3.3.2-1.el6.noarch
>> ovirt-engine-3.3.2-1.el6.noarch
>> ovirt-host-deploy-1.1.2-1.el6.noarch
>>
>> vdsm-xmlrpc-4.13.2-1.el6.noarch
>> vdsm-python-4.13.2-1.el6.x86_64
>> vdsm-python-cpopen-4.13.2-1.el6.x86_64
>> vdsm-4.13.2-1.el6.x86_64
>> vdsm-cli-4.13.2-1.el6.noarch
>>
>> libvirt-lock-sanlock-0.10.2-29.el6_5.2.x86_64
>> libvirt-client-0.10.2-29.el6_5.2.x86_64
>> libvirt-python-0.10.2-29.el6_5.2.x86_64
>> libvirt-0.10.2-29.el6_5.2.x86_64
>>
>> CentOS 6.5 x86_64 on both Engine and Nodes.
>>
>> SELinux disabled everywhere (I know, I know).
>> There is no any snapshots for these VMs. These VMs
>> were
>> installed by booting from ISO image.
>> There is nothing in libvirtd.log files
>>
>>
>> BR
>> Edgars
>>
>>
>>
>> On Sat, Jan 18, 2014 at 6:39 PM, Dafna Ron
>> <dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com
>> <mailto:dron at redhat.com>>>> wrote:
>>
>> sounds like this is the issue to me... Edgars
>> can you try to
>> confirm that? :)
>> Michal, was there a bug opened for this? I
>> think that
>> perhaps we
>> should also add a clear error message - it
>> would help
>> debug this
>> more easily.
>>
>>
>>
>> On 01/18/2014 05:34 PM, Michal Skrivanek wrote:
>>
>>
>> On 18 Jan 2014, at 18:06, Itamar Heim
>> <iheim at redhat.com <mailto:iheim at redhat.com>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>
>> <mailto:iheim at redhat.com
>> <mailto:iheim at redhat.com>
>>
>> <mailto:iheim at redhat.com
>> <mailto:iheim at redhat.com>>>> wrote:
>>
>> On 01/18/2014 03:44 PM, Edgars M.
>> wrote:
>> Hi
>>
>> Thanks for your help. I will
>> provide all log
>> files a
>> little bit later,
>> but so far I have noticed some
>> pattern when
>> migration
>> fails. Those
>> particular VMs, which fails to
>> migrate, were
>> installed
>> from ISO image,
>> usual installation. So, I believe
>> you can
>> reproduce
>> the issue by this:
>>
>> 1. Upload ISO image to ISO domain
>> 2. Install new OS by booting from
>> ISO image
>> and check
>> Attach CD in Boot
>> Options
>> 3. Delete ISO image from ISO domain
>> 4. Try to migrate VM to another host.
>>
>>
>> I have not tried this yet, but I
>> have noticed that
>> only those VMs fails
>> which had been install from ISO
>> image which is
>> not in
>> ISO domain
>> anymore. I have also VMs created from
>> templates and
>> those VMs I can
>> migrate just fine.
>>
>> did you stop the VMs post install? did
>> you try to
>> start
>> them without the iso attached?
>> otherwise, you can't start them, as
>> there is a
>> missing iso
>> for the target qemu process
>>
>> Indeed. That is a known libvirt/qemu issue
>> that even
>> though
>> the CD is defined as optional and VM can
>> be started
>> without it
>> on original host, it fails upon migration when
>> destination is
>> being created.
>>
>> Thanks,
>> michal
>>
>> I will provide more log files later.
>>
>> BR
>> Edgars
>>
>>
>> On Sat, Jan 18, 2014 at 1:05 PM,
>> Dafna Ron
>> <dron at redhat.com
>> <mailto:dron at redhat.com> <mailto:dron at redhat.com
>> <mailto:dron at redhat.com>>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>>
>> <mailto:dron at redhat.com
>> <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>>
>> <mailto:dron at redhat.com <mailto:dron at redhat.com>
>> <mailto:dron at redhat.com
>> <mailto:dron at redhat.com>>>>> wrote:
>>
>> I looked at the logs log and
>> only vdsm
>> from node2
>> (which appears to
>> be the src node) seems to have
>> full info.
>>
>> Please attach the following
>> complete logs:
>> vdsm log from dst node
>> engine log
>> libvirt logs from both nodes.
>>
>> Also, can you please answer
>> the following?
>> libvirt and vdsm you are using?
>> what is selinux status on both
>> hosts
>> (enforcing/permissive)?
>> do you have snapshots on the
>> vm or does it
>> happen
>> on a newly created
>> disk?
>> when you create the disk, is
>> it from a
>> template or
>> is it a new image?
>>
>> Thanks,
>>
>> Dafna
>>
>>
>>
>>
>> On 01/17/2014 10:21 PM, Itamar
>> Heim wrote:
>>
>> On 01/18/2014 12:07 AM, Meital
>> Bourvine wrote:
>>
>> I opened a bug about
>> missing info
>> in UI:
>> https://bugzilla.redhat.com/__show_bug.cgi?id=1054994
>> <https://bugzilla.redhat.com/
>> show_bug.cgi?id=1054994>
>>
>> It actually failed
>> with this error:
>> Thread-1417::DEBUG::2014-01-17
>> 17:01:28,344::vm::768::vm.Vm::__(run)
>> vmId=`b8787906-187a-4234-a0c9-
>> __58fc4ddf2a57`::starting
>> migration monitor thread
>> Thread-1415::DEBUG::2014-01-17
>> 17:01:28,409::__
>> libvirtconnection::108::__libvirtconnection::(wrapper)
>> Unknown libvirterror:
>> ecode: 38
>> edom: 42
>> level: 2 message:
>> Failed to inquire
>> lock: No such
>> process
>> Thread-1415::DEBUG::2014-01-17
>> 17:01:28,409::vm::745::vm.Vm::__(cancel)
>> vmId=`b8787906-187a-4234-a0c9-
>> __58fc4ddf2a57`::canceling
>> migration downtime thread
>> Thread-1415::DEBUG::2014-01-17
>> 17:01:28,409::vm::815::vm.Vm::__(stop)
>> vmId=`b8787906-187a-4234-a0c9-
>> __58fc4ddf2a57`::stopping
>> migration monitor thread
>> Thread-1416::DEBUG::2014-01-17
>> 17:01:28,409::vm::742::vm.Vm::__(run)
>> vmId=`b8787906-187a-4234-a0c9-
>> __58fc4ddf2a57`::migration
>> downtime thread exiting
>> Thread-1415::ERROR::2014-01-17
>> 17:01:28,410::vm::238::vm.Vm::__(_recover)
>> vmId=`b8787906-187a-4234-a0c9-__58fc4ddf2a57`::Failed
>> to
>> inquire lock: No such
>> process
>> Thread-1415::ERROR::2014-01-17
>> 17:01:28,619::vm::337::vm.Vm::__(run)
>> vmId=`b8787906-187a-4234-a0c9-
>> __58fc4ddf2a57`::Failed
>> to migrate
>> Traceback (most recent call last):
>> File
>> "/usr/share/vdsm/vm.py", line
>> 323, in run
>> self.___startUnderlyingMigration()
>> File
>> "/usr/share/vdsm/vm.py",
>> line 400, in
>> _startUnderlyingMigration
>> None, maxBandwidth)
>> File
>> "/usr/share/vdsm/vm.py", line
>> 838, in f
>> ret = attr(*args, **kwargs)
>> File
>> "/usr/lib64/python2.6/site-__
>> packages/vdsm/__libvirtconnection.py",
>> line 76, in wrapper
>> ret = f(*args, **kwargs)
>> File
>> "/usr/lib64/python2.6/site-__packages/libvirt.py",
>> line 1178, in
>> migrateToURI2
>> if ret == -1:
>> raise libvirtError
>> ('virDomainMigrateToURI2()
>> failed', dom=self)
>> libvirtError: Failed to inquire
>> lock: No
>> such process
>> Thread-26::ERROR::2014-01-17
>> 17:01:28,917::sampling::355::__vm.Vm::(collect)
>> vmId=`b8787906-187a-4234-a0c9-__58fc4ddf2a57`::Stats
>> function failed:
>> <AdvancedStatsFunction
>> _highWrite at 0x26efb58>
>>
>> The problem is that it
>> doesn't say
>> which
>> process...
>>
>>
>> this looks like noise post
>> the migration
>> failing, with probably
>> a more relevant error in
>> libvirt log
>>
>>
>> ----- Original Message
>> -----
>>
>> From: "Itamar Heim"
>> <iheim at redhat.com <mailto:iheim at redhat.com>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>
>> <mailto:iheim at redhat.com
>> <mailto:iheim at redhat.com>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>
>>
>> <mailto:iheim at redhat.com
>> <mailto:iheim at redhat.com>
>> <mailto:iheim at redhat.com <mailto:iheim at redhat.com
>> >>>>>
>>
>> To: "Edgars M."
>> <edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>
>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>>>>, "Meital Bourvine"
>> <
>> mbourvin at redhat.com <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>>>
>> Cc:
>> users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>
>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>>>>, "Michal
>> Skrivanek"
>> <mskrivan at redhat.com <mailto:mskrivan at redhat.com>
>> <mailto:mskrivan at redhat.com <mailto:mskrivan at redhat.com>>
>> <mailto:mskrivan at redhat.com
>> <mailto:mskrivan at redhat.com>
>> <mailto:mskrivan at redhat.com
>> <mailto:mskrivan at redhat.com>>>
>> <mailto:mskrivan at redhat.com <mailto:mskrivan at redhat.com>
>> <mailto:mskrivan at redhat.com
>> <mailto:mskrivan at redhat.com>>
>>
>> <mailto:mskrivan at redhat.com
>> <mailto:mskrivan at redhat.com>
>> <mailto:mskrivan at redhat.com
>> <mailto:mskrivan at redhat.com>>>>>
>> Sent: Friday, January 17, 2014
>> 9:47:11 PM
>> Subject: Re: [Users] VM
>> Migration failed
>>
>> On 01/17/2014
>> 06:25 PM, Edgars
>> M. wrote:
>>
>> Hi Meital
>>
>> I tried to migrate another
>> VM and
>> it also failed.
>>
>> This is what I get in UI:
>>
>>
>> Migration started (VM:
>> nophpapp01,
>> Source:
>> novmnode1, Destination:
>> novmnode2, User: edgarsm).
>> Migration failed due to Error:
>> Fatal error during
>> migration. Trying to
>> migrate to another Host (VM:
>> nophpapp01, Source:
>> novmnode1, Destination:
>> novmnode2).
>> Migration failed due to Error:
>> Fatal error during
>> migration (VM:
>> nophpapp01, Source: novmnode1,
>> Destination: novmnode2).
>>
>> There is nothing in
>> /var/log/messages, neither on
>> engine server nor nodes.
>>
>>
>> See attachments for engine and
>> vdsm logs. (I am
>> migrating from vmnode1
>> to vmnode2)
>>
>>
>> whatever the issue is here,
>> can you
>> please open a bug on
>> trying to
>> return more info to user on the
>> migration error itself
>> (for easier
>> troubleshooting).
>>
>> thanks,
>> Itamar
>>
>>
>> Thanks for the help
>> Edgars
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Jan 17, 2014 at
>> 4:46 PM,
>> Meital Bourvine
>> <mbourvin at redhat.com <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>
>> <mailto:mbourvin at redhat.com
>> <mailto:mbourvin at redhat.com>>>>>> wrote:
>>
>> Which error are you
>> getting
>> in the UI?
>> Can you please
>> attach the
>> full engine and vdsm
>> logs?
>> Also, please check
>> if there
>> is a relevant
>> error in /var/log/messages
>>
>>
>> ------------------------------
>> __------------------------------__------------
>>
>>
>> *From: *"Edgars M."
>> <edgars.mazurs at gmail.com <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>>
>> <mailto:edgars.mazurs at gmail.com
>>
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>>>
>> <mailto:edgars.mazurs at gmail
>> <mailto:edgars.mazurs at gmail> <mailto:edgars.mazurs at gmail
>>
>> <mailto:edgars.mazurs at gmail>>.
>> <mailto:edgars.mazurs at gmail
>> <mailto:edgars.mazurs at gmail>
>> <mailto:edgars.mazurs at gmail
>> <mailto:edgars.mazurs at gmail>>.>__com
>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>
>>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>
>> <mailto:edgars.mazurs at gmail.com
>> <mailto:edgars.mazurs at gmail.com>>>>>>
>> *To:
>> *users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>>>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>>>> <mailto:users at ovirt.org
>>
>> <mailto:users at ovirt.org>
>>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>>>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>> <mailto:users at ovirt.org
>> <mailto:users at ovirt.org>
>> <mailto:users at ovirt.org <mailto:users at ovirt.org>>>>>
>>
>> *Sent: *Friday,
>> January
>> 17, 2014 3:42:37 PM
>> *Subject: *[Users] VM
>> Migration failed
>>
>>
>> Hi
>>
>> I am
>> experiencing issues
>> with manual VM
>> migration. VM fails to
>> migrate to other
>> node in
>> the same Cluster.
>> Here are some
>> relevant
>> engine.log entries:
>>
>> ERROR
>> [org.ovirt.engine.core.__vdsbroker.__
>> VdsUpdateRunTimeInfo]
>> (DefaultQuartzScheduler___Worker-73) Rerun vm
>> a31cfd62-26fc-4396-8a83-__1aed68c7fd39.
>> Called from vds novmnode1
>>
>> ERROR
>> [org.ovirt.engine.core.__
>> vdsbroker.vdsbroker.__MigrateStatusVDSCommand]
>> (pool-6-thread-49) Failed in
>> MigrateStatusVDS method
>>
>> ERROR
>> [org.ovirt.engine.core.__
>> vdsbroker.vdsbroker.__MigrateStatusVDSCommand]
>> (pool-6-thread-49) Error
>> code migrateErr
>> and error message
>> VDSGenericException:
>> VDSErrorException:
>> Failed to
>> MigrateStatusVDS, error
>> = Fatal error
>> during migration
>>
>> ERROR
>> [org.ovirt.engine.core.__
>> vdsbroker.vdsbroker.__MigrateStatusVDSCommand]
>> (pool-6-thread-49) Command
>> MigrateStatusVDS execution
>> failed.
>> Exception:
>> VDSErrorException:
>> VDSGenericException:
>> VDSErrorException: Failed to
>> MigrateStatusVDS, error =
>> Fatal
>> error during
>> migration
>>
>> Both Engine and
>> Node are
>> running CentOS
>> 6.5 x64. oVirt Engine
>> Version:
>> 3.3.2-1.el6.
>> VDSM version
>> 4.13.2-1. I restarted engine
>> and vdsm, that
>> did not help.
>>
>> Also in vdsm log
>> file I
>> see the following
>> errors related to the
>> same VM ID:
>>
>> Thread-27::ERROR::2014-01-17
>>
>> 16:37:06,271::sampling::355::__vm.Vm::(collect)
>>
>> vmId=`a31cfd62-26fc-4396-8a83-__1aed68c7fd39`::Stats
>> function
>> failed:
>> <AdvancedStatsFunction _highWrite
>> at 0x26efb58>
>>
>> Any hints?
>>
>> BR
>> Edgars
>>
>>
>> _________________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>> <mailto:Users at ovirt.org
>> <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org
>> <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org
>> <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>>
>>
>> http://lists.ovirt.org/__mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>>
>>
>> _________________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>> <mailto:Users at ovirt.org
>> <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>> http://lists.ovirt.org/__mailman/listinfo/users
>> <http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>>
>>
>> _________________________________________________
>> Users mailing list
>> Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>
>> <mailto:Users at ovirt.org
>> <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>
>> <mailto:Users at ovirt.org <mailto:Users at ovirt.org>>>>
>> http://lists.ovirt.org/__mailman/listinfo/users
>> <
>> http://lists.ovirt.org/mailman/listinfo/users>
>>
>>
>>
>> --
>> Dafna Ron
>>
>>
>>
>>
>> -- Dafna Ron
>>
>>
>>
>>
>> -- Dafna Ron
>>
>>
>>
>>
>> -- Dafna Ron
>>
>>
>>
>>
>
> --
> Dafna Ron
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140120/e8ca5f13/attachment-0001.html>
More information about the Users
mailing list