[Users] oVirt Node ISO for oVirt 3.3 - Draft image for testing
Fabian Deutsch
fabiand at redhat.com
Mon Jan 20 15:15:44 UTC 2014
Am Montag, den 20.01.2014, 13:10 -0200 schrieb Laercio Motta:
> Understand?? o.0
Hey Laercio,
sorry for the delay.
I think I do understand the problem: The NIC order is different the
previously, right?
When you configure a NIC you cna use the <Flash NIC to identify> button
to identify a special NIC.
We won't change this on el6 - but the Feora based Node should be using
predictable network names, which is addressing this issue.
- fabian
>
>
> 2014/1/17 Laercio Motta <laerciomasala at gmail.com>
> Hi,
>
>
> > Could you explain this a bit more?
> > Did all NICs appear, or did to many NICs appear?
>
>
> I'm used to udev leave my NIC in sequence.
> And in this case it got messed up:
> common:
> eth0 -> port 1
> eth1 -> port 2
> ethx >> port X
>
> What happened:
> eth0 -> port 1
> eth4 -> port 3
> eth5 -> port 4
> eth6 -> port 2
>
> As follows attached file ..
>
> Not a big problem .. But it confused me a little time to
> configure the network of 'nodes' ... Had to use tcpdump
> (thankfully that was available) to find out which interface
> belonged to what port Switch for CDP: P
>
>
>
>
> 2014/1/17 Fabian Deutsch <fabiand at redhat.com>
> Hi Laercio,
>
> Am Freitag, den 17.01.2014, 14:49 -0200 schrieb
> Laercio Motta:
>
> > I tested the ISO here.
>
>
> Thanks for being that brave! ;)
>
> > - I was able to register with the engine and aprove
> (thing with
> > 'oVirt-node-3.0.1-iso-1.0.2.vdsm.el6.iso' version
> was not possible)
>
>
> Great that this works now.
>
> > - Firewall: Being duplicated the rule of vdsm port
> (54321).
> > - 'Sanlock' is being blocked by 'selinux' (audit.log
> attached)
>
>
> Okay, those are probably bugs we need to take care of.
>
> > - NIC was messy .. :P (eth0, eth4, eth5, eth6... )..
>
>
> Could you explain this a bit more?
> Did all NICs appear, or did to many NICs appear?
>
> Thanks
> fabian
>
> >
> >
> >
> > 2014/1/17 Fabian Deutsch <fabiand at redhat.com>
> > Hey,
> >
> > as many of you have noticed there wasn't any
> well working
> > oVirt Node ISO
> > around for oVirt 3.3.
> > To get this ball rolling again I've put
> together a draft image
> > of ALPHA
> > quality. It contains many fixes some of us
> have been working
> > on over the
> > last weeks.
> >
> > - Source & ISO -
> > To not drown Jenkins in a
> hell-of-a-patch-queue I've pushed
> > the patches to
> >
> >
> https://github.com/fabiand/ovirt-node/tree/teamsync
> >
> > The ISO built from that patchset can be
> found here:
> >
> >
> http://fedorapeople.org/~fabiand/node/3.0.4/ovirt-node-iso-3.0.3-0.999.201401170926draft.vdsm.el6.iso
> >
> > Please test this draft image and provide
> feedback on how it
> > works for
> > you.
> > If you encounter problems - and you probably
> will - please
> > take a look
> > here on how to debug them:
> >
> > http://www.ovirt.org/Node_Troubleshooting
> >
> > - Important Notes -
> > SELinux: Boot this alpha image with
> enforcing=0 to log
> > potential
> > denials, but not block the calls. To fix
> those denials
> > permanently
> > please attach your /var/log/audit/audit.log
> to a bug in
> > bugzilla.
> >
> > Known problems:
> > - Exception is raised after registration to
> Engine
> > - Many bond devices are show on network page
> > - Denials appear in /var/log/audit/audit.log
> >
> >
> > And don't hesitate to reach out to us if you
> want to get more
> > involved
> > with Node.
> >
> > - fabian
> >
> >
> >
> > --
> > ╔══════════════════════════════════════════════╗
> > ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> > ║----------------------------------------------║
> > ║ Blog: http://www.laerciomotta.com/ ║
> > ║ Twitter: http://twitter.com/#!/laerciomasala ║
> > ║ Skype: laerciomasala ║
> > ║ Chave PGP: http://bit.ly/kXS6ga ║
> > ╚═════════════════════════════════════════v1.0═╝
>
>
>
>
>
> --
> ╔══════════════════════════════════════════════╗
> ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> ║----------------------------------------------║
> ║ Blog: http://www.laerciomotta.com/ ║
> ║ Twitter: http://twitter.com/#!/laerciomasala ║
> ║ Skype: laerciomasala ║
> ║ Chave PGP: http://bit.ly/kXS6ga ║
> ╚═════════════════════════════════════════v1.0═╝
>
>
>
> --
> ╔══════════════════════════════════════════════╗
> ║▒▒▒▒▒▒▒▒▒▒▒ Laercio da Silva Motta ▒▒▒▒▒▒▒▒▒▒▒║
> ║----------------------------------------------║
> ║ Blog: http://www.laerciomotta.com/ ║
> ║ Twitter: http://twitter.com/#!/laerciomasala ║
> ║ Skype: laerciomasala ║
> ║ Chave PGP: http://bit.ly/kXS6ga ║
> ╚═════════════════════════════════════════v1.0═╝
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140120/b4c04fd4/attachment-0001.sig>
More information about the Users
mailing list