[Users] Centos 6.5 and bonding: "A slave interface is not properly configured"

[Moti Asayag]

----- Original Message -----
> From: "Federico Alberto Sayd" <fsayd at uncu.edu.ar>
> To: users at ovirt.org
> Sent: Friday, January 24, 2014 4:06:11 PM
> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not properly configured"
> 
> On 24/01/14 08:31, Moti Asayag wrote:
> >
> > ----- Original Message -----
> >> From: "Federico Alberto Sayd" <fsayd at uncu.edu.ar>
> >> To: users at ovirt.org
> >> Sent: Thursday, January 23, 2014 3:57:53 PM
> >> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not
> >> properly configured"
> >>
> >> On 23/01/14 07:02, Moti Asayag wrote:
> >>> ----- Original Message -----
> >>>> From: "Federico Sayd" <fsayd at uncu.edu.ar>
> >>>> To: users at ovirt.org
> >>>> Sent: Wednesday, January 22, 2014 2:22:01 AM
> >>>> Subject: [Users] Centos 6.5 and bonding: "A slave interface is not
> >>>> properly	configured"
> >>>>
> >>>> Hello:
> >>>>
> >>>> I am having problems with bonding
> >>>>
> >>>> I have installed Centos 6.5 in order to use it as host. I configured
> >>>> eth0
> >>>> with the vlan of the management network (Vlan 70). Then I registered the
> >>>> host to the engine (3.3.2-1-el6) and the engine installed oVirt in the
> >>>> host
> >>>> without problem. Ovirtmgmt was created automatically and bridged with
> >>>> eth0.70.
> >>>>
> >>>> Now I need to bond a second network interface (eth1) with eth0. But when
> >>>> I
> >>>> try to bond the nics, I get the next error:
> >>>>
> >>> Could you describe how you've created the bond ? via webadmin setup
> >>> networks
> >>> dialog or via api ?
> >>>
> >>>
> >> Via webadmin Setup Network (Web GUI)
> > Does the setup dialog presents the new configuration when you create the
> > bond ?
> > Meaning, does it draw the following ?
> > eth0 --
> >         |--bond0 --- ovirtmgmt (vlan 70)
> > eth1 --
> >
> > If it does, this is simply bug in the UI which should have better construct
> > the parameters to the setup networks.
> >
> > Could you open a bug for it ?
> >
> > You may use the setup networks api (via rest-client or using the sdk) to
> > specify
> > the target configuration.
> >
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >
> No, the bond is never displayed in the web UI, the error prevents the
> bond creation. I already solved the problem, only I think that would be
> fine if the UI error be more explicit and include info about to the
> interface or interfaces with problematic configurations.
> 
> I don't know if supervdsm.log or vdsm.log make reference to the
> interfaces that have unacceptable configurations.
>

The error indicates that the parameters sent from the UI to that engine
weren't constructed properly. In this case the engine failed the action
and it never reached the host.

Lior, could you verify this scenario and see which fields left with
improper values on the UI side ?

_____________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>