[Users] Centos 6.5 and bonding: "A slave interface is not properly configured"

[Lior Vernia]

On 25/01/14 01:24, Moti Asayag wrote:
> 
> 
> ----- Original Message -----
>> From: "Federico Alberto Sayd" <fsayd at uncu.edu.ar>
>> To: users at ovirt.org
>> Sent: Friday, January 24, 2014 4:06:11 PM
>> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not properly configured"
>>
>> On 24/01/14 08:31, Moti Asayag wrote:
>>>
>>> ----- Original Message -----
>>>> From: "Federico Alberto Sayd" <fsayd at uncu.edu.ar>
>>>> To: users at ovirt.org
>>>> Sent: Thursday, January 23, 2014 3:57:53 PM
>>>> Subject: Re: [Users] Centos 6.5 and bonding: "A slave interface is not
>>>> properly configured"
>>>>
>>>> On 23/01/14 07:02, Moti Asayag wrote:
>>>>> ----- Original Message -----
>>>>>> From: "Federico Sayd" <fsayd at uncu.edu.ar>
>>>>>> To: users at ovirt.org
>>>>>> Sent: Wednesday, January 22, 2014 2:22:01 AM
>>>>>> Subject: [Users] Centos 6.5 and bonding: "A slave interface is not
>>>>>> properly	configured"
>>>>>>
>>>>>> Hello:
>>>>>>
>>>>>> I am having problems with bonding
>>>>>>
>>>>>> I have installed Centos 6.5 in order to use it as host. I configured
>>>>>> eth0
>>>>>> with the vlan of the management network (Vlan 70). Then I registered the
>>>>>> host to the engine (3.3.2-1-el6) and the engine installed oVirt in the
>>>>>> host
>>>>>> without problem. Ovirtmgmt was created automatically and bridged with
>>>>>> eth0.70.
>>>>>>
>>>>>> Now I need to bond a second network interface (eth1) with eth0. But when
>>>>>> I
>>>>>> try to bond the nics, I get the next error:
>>>>>>
>>>>> Could you describe how you've created the bond ? via webadmin setup
>>>>> networks
>>>>> dialog or via api ?
>>>>>
>>>>>
>>>> Via webadmin Setup Network (Web GUI)
>>> Does the setup dialog presents the new configuration when you create the
>>> bond ?
>>> Meaning, does it draw the following ?
>>> eth0 --
>>>         |--bond0 --- ovirtmgmt (vlan 70)
>>> eth1 --
>>>
>>> If it does, this is simply bug in the UI which should have better construct
>>> the parameters to the setup networks.
>>>
>>> Could you open a bug for it ?
>>>
>>> You may use the setup networks api (via rest-client or using the sdk) to
>>> specify
>>> the target configuration.
>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>>
>> No, the bond is never displayed in the web UI, the error prevents the
>> bond creation. I already solved the problem, only I think that would be
>> fine if the UI error be more explicit and include info about to the
>> interface or interfaces with problematic configurations.
>>
>> I don't know if supervdsm.log or vdsm.log make reference to the
>> interfaces that have unacceptable configurations.
>>
> 
> The error indicates that the parameters sent from the UI to that engine
> weren't constructed properly. In this case the engine failed the action
> and it never reached the host.
> 
> Lior, could you verify this scenario and see which fields left with
> improper values on the UI side ?
> 

Apologies for the delay in responding. I tried running a similar
scenario via the GUI on my deployment and it worked fine (and this part
of the code shouldn't have changed recently). So I suspect the problem
isn't with the Setup Networks GUI.

> _____________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>