[Users] Instructions to add a remote controlled power strip not in the native list?

Itamar Heim iheim at redhat.com
Fri Mar 14 09:39:52 UTC 2014


On 03/13/2014 07:03 PM, David Smith wrote:
> hey can someone provide these mysterious instructions or at least point
> me towards the direction of where this magical list of supported
> fence-agents units is so I can try to figure it out myself?
>

that would be eli, already asked for in my previous reply.
until he replies, you can look at the vdc_options table at these values 
(they are not available out of the box via the config utility, as they 
would be overridden at upgrade):

VdsFenceType

upgrade/pre_upgrade/0000_config.sql:select 
fn_db_update_config_value('VdsFenceType','apc,apc_snmp,bladecenter,cisco_ucs,drac5,drac7,eps,hpblade,ilo,ilo2,ilo3,ilo4,ipmilan,rsa,rsb,wti','3.4');


VdsFenceOptionMapping

upgrade/pre_upgrade/0000_config.sql:select 
fn_db_update_config_value('VdsFenceOptionMapping','apc:secure=secure,port=ipport,slot=port;apc_snmp:port=port;bladecenter:secure=secure,port=ipport,slot=port;cisco_ucs:secure=ssl,slot=port;drac5:secure=secure,slot=port;drac7:;eps:slot=port;hpblade:port=port;ilo:secure=ssl,port=ipport;ipmilan:;ilo2:secure=ssl,port=ipport;ilo3:;ilo4:;rsa:secure=secure,port=ipport;rsb:;wti:secure=secure,port=ipport,slot=port','3.4');

VdsFenceOptionTypes
upgrade/pre_upgrade/0000_config.sql:select 
fn_db_add_config_value('VdsFenceOptionTypes','secure=bool,port=int,slot=int','general');



>
>
>
> On Wed, Mar 12, 2014 at 12:18 AM, Itamar Heim <iheim at redhat.com
> <mailto:iheim at redhat.com>> wrote:
>
>     On 03/11/2014 11:43 PM, David Smith wrote:
>
>         I modified, tested, and added via git (also submitted note in
>         rhbz#519731) support for at least basic power on/off of the raritan
>         devices I have (model DPXS12-20)
>         Now that I have a working fence agent for myself, is it possible
>         to tell
>         me how I can make the config change on my engine to add the
>         support for
>         the fence agent I created?
>
>
>     yes, you can change the config of the engine to add it - eli can
>     give more details (hopefully to be wikified later).
>     one caveat is i don't think we accommodated yet for customizing it,
>     so it may be overridden when you upgrade the engine.
>     (Eli, maybe consider changing to osinfo.d/ like format allowing both
>     our own config and user configs side by side)
>     to add this by default to engine, we'd need this to be in a released
>     version of fence-agents.
>
>
>         Thanks.
>
>
>         On Mon, Feb 17, 2014 at 5:43 AM, Itamar Heim <iheim at redhat.com
>         <mailto:iheim at redhat.com>
>         <mailto:iheim at redhat.com <mailto:iheim at redhat.com>>> wrote:
>
>              On 02/17/2014 03:31 PM, Marek Grac wrote:
>
>                  On 02/17/2014 09:45 AM, Eli Mesika wrote:
>
>
>                      ----- Original Message -----
>
>                          From: "Yedidyah Bar David" <didi at redhat.com
>         <mailto:didi at redhat.com>
>                          <mailto:didi at redhat.com <mailto:didi at redhat.com>>>
>                          To: "Itamar Heim" <iheim at redhat.com
>         <mailto:iheim at redhat.com>
>                          <mailto:iheim at redhat.com
>         <mailto:iheim at redhat.com>>>
>                          Cc: users at ovirt.org <mailto:users at ovirt.org>
>         <mailto:users at ovirt.org <mailto:users at ovirt.org>>
>
>                          Sent: Sunday, February 16, 2014 2:58:35 PM
>                          Subject: Re: [Users] Instructions to add a remote
>                          controlled power
>                          strip not in the native list?
>
>                          ----- Original Message -----
>
>                              From: "Itamar Heim" <iheim at redhat.com
>         <mailto:iheim at redhat.com>
>                              <mailto:iheim at redhat.com
>         <mailto:iheim at redhat.com>>>
>                              To: "David Smith" <dsmith at mypchelp.com
>         <mailto:dsmith at mypchelp.com>
>                              <mailto:dsmith at mypchelp.com
>         <mailto:dsmith at mypchelp.com>>>, users at ovirt.org
>         <mailto:users at ovirt.org>
>                              <mailto:users at ovirt.org
>         <mailto:users at ovirt.org>>
>
>                              Sent: Saturday, February 15, 2014 2:57:00 AM
>                              Subject: Re: [Users] Instructions to add a
>         remote
>                              controlled power
>                              strip
>                              not in the native list?
>
>                              On 02/14/2014 07:37 PM, David Smith wrote:
>
>                                  We use Raritan / Dominion PX remote power
>                                  blocks, is there a way to
>                                  easily add support for these?
>
>                      CCing Marek on that in case that he had something
>         to add
>                      from the
>                      fence-agents view since it may be already supported
>                      implicitly (like
>                      drac7 that is using actually ipmilan)
>
>
>                  No, Raritan are not supported yet (rhbz#519731)
>
>
>              so david, if you can try to push the raritan support to
>              fence-agents, the ovirt side is usually just a config change.
>
>
>
>




More information about the Users mailing list