[ovirt-users] 答复: Engine is still unreachable

Sandvik Agustin agustinsandvik at gmail.com
Fri Nov 21 01:21:45 EST 2014 

Hi,


The repo that I have use if
http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from this
documentation http://www.ovirt.org/Quick_Start_Guide, because the repo that
this documentation
http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
------------------------------

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and
find us on Facebook <https://www.facebook.com/redhatopen> and Google+
<https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
.
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
------------------------------

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and
find us on Facebook <https://www.facebook.com/redhatopen> and Google+
<https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
.
sudo yum localinstall -y http://ovirt.org/releases/ovirt-release.noarch.rpm
------------------------------

This article originally appeared on community.redhat.com. Follow the
community on Twitter at @redhatopen <https://twitter.com/redhatopen>, and
find us on Facebook <https://www.facebook.com/redhatopen> and Google+
<https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
.

On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou <coffee.zyr at gmail.com> wrote:

> Hi, Sandvik
>     I have read the engine.log, it shows:
> Cannot find a valid baseurl for repo: base
>
>     can you show me your repo?
>
> 2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>:
>
>> Hi,
>>
>> I'm sorry I forgot, here's the attachement.
>>
>> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
>> agustinsandvik at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> I'm sorry I forgot, here's the attachement.
>>>
>>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr at gmail.com>
>>> wrote:
>>>
>>>> Hi, Sandvik
>>>>     maybe you forgot to attach your log~ that's
>>>> ovirt-hosted-engine-setup, so you can also attach your setup log:-)
>>>>
>>>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>:
>>>>
>>>>> Hi users,
>>>>>
>>>>> Chou, here's my I already tried your suggestion right now, but it
>>>>> still failed, here's my engine.log and vdsm.log. and one more thing, since
>>>>> the time that I started the installation of ovirt-hosted-engine setup, I
>>>>> starting to have this kind of error message on my /var/log/message.
>>>>>
>>>>>
>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>>> multipath: error getting device
>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>>> target to table
>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>>> multipath: error getting device
>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>>> target to table
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>> can't remove
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>> can't remove
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>> can't remove
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>> can't remove
>>>>>
>>>>>
>>>>> Thanks in advance
>>>>> Sandvik
>>>>>
>>>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi, Sandvik
>>>>>>     it's just a suggestion:-)
>>>>>>
>>>>>>     i think you can have a try, as i don't know my solution worked or
>>>>>> not. maybe there are some other people who have encountered this problem
>>>>>> before and they can give you some advice:-)
>>>>>>
>>>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>
>>>>>> :
>>>>>>
>>>>>>> HI Chou,
>>>>>>>
>>>>>>>
>>>>>>> Thanks, I will try your solution now, and should I resend this email
>>>>>>> to users at ovirt.org?
>>>>>>>
>>>>>>>
>>>>>>> Thanks
>>>>>>> Sandvik
>>>>>>>
>>>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi, Sandvik
>>>>>>>>     and please don't send the email to me only but to user mail
>>>>>>>> list, so everybody can help you :-)
>>>>>>>>
>>>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr at gmail.com>:
>>>>>>>>
>>>>>>>>> Hi, Sandvik
>>>>>>>>>     i can see the ERROR message: Command returned failure code 1
>>>>>>>>> during SSH session .... you can try these:
>>>>>>>>>
>>>>>>>>> 1. stop firewall on the hosted_engine_1
>>>>>>>>> 2. running command: vdsm-tool configure
>>>>>>>>>
>>>>>>>>>     if it's still failure, please attach your engine.log and
>>>>>>>>> vdsm.log
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <
>>>>>>>>> agustinsandvik at gmail.com>:
>>>>>>>>>
>>>>>>>>>> Hi Chou,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> I have successfully install the hosted engine, but at the end of
>>>>>>>>>> the installation I have this kind of error message
>>>>>>>>>>
>>>>>>>>>>  To continue make a selection from the options below:
>>>>>>>>>>           (1) Continue setup - engine installation is complete
>>>>>>>>>>           (2) Power off and restart the VM
>>>>>>>>>>           (3) Abort setup
>>>>>>>>>>
>>>>>>>>>>           (1, 2, 3)[1]:
>>>>>>>>>> [ INFO  ] Engine replied: DB Up!Welcome to Health Status!
>>>>>>>>>>           Enter the name of the cluster to which you want to add
>>>>>>>>>> the host (Default) [Default]:
>>>>>>>>>> [ INFO  ] Waiting for the host to become operational in the
>>>>>>>>>> engine. This may take several minutes...
>>>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please check
>>>>>>>>>> engine and bootstrap installation logs.
>>>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>>>>>>>>           Please shutdown the VM allowing the system to launch it
>>>>>>>>>> as a monitored service.
>>>>>>>>>>           The system will wait until the VM is down.
>>>>>>>>>> [ INFO  ] Enabling and starting HA services
>>>>>>>>>>           Hosted Engine successfully set up
>>>>>>>>>> [ INFO  ] Stage: Clean up
>>>>>>>>>> [ INFO  ] Generating answer file
>>>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf'
>>>>>>>>>> [ INFO  ] Answer file '/etc/ovirt-hosted-engine/answers.conf' has
>>>>>>>>>> been updated
>>>>>>>>>> [ INFO  ] Stage: Pre-termination
>>>>>>>>>> [ INFO  ] Stage: Termination
>>>>>>>>>>
>>>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>>>>>>>>> while executing action:
>>>>>>>>>>
>>>>>>>>>> hosted_engine_1:
>>>>>>>>>>
>>>>>>>>>>    - Cannot activate Host. Host has no unique id.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen it
>>>>>>>>>> still failed status.
>>>>>>>>>>
>>>>>>>>>> I hope you can help me.
>>>>>>>>>>
>>>>>>>>>> Please see attach for screenshot.
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> Thanks in advance.
>>>>>>>>>> sandvik
>>>>>>>>>>
>>>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>>>>>>>>> agustinsandvik at gmail.com> wrote:
>>>>>>>>>>
>>>>>>>>>>> Hi guys,
>>>>>>>>>>>
>>>>>>>>>>> First of all I want to thank you for replying my email.
>>>>>>>>>>> @Chou, yes I can access the engine webadmin.
>>>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check
>>>>>>>>>>> my /etc/hosts I have hostname conflict, then the ovirt engine is now
>>>>>>>>>>> reachable, but there's another error message, it say's invalid certificate.
>>>>>>>>>>> Is this because of I've put different FQDN during the installation process?
>>>>>>>>>>>
>>>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <
>>>>>>>>>>> coffee.zyr at gmail.com> wrote:
>>>>>>>>>>>
>>>>>>>>>>>> Hi, Chao
>>>>>>>>>>>>     You may make a mistake, that's not my setup :-)
>>>>>>>>>>>>     But i don't think it's a problem of password. If the
>>>>>>>>>>>> passwords were not the same, it will throw an ERROR of:
>>>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None:
>>>>>>>>>>>> HTTP Status 401
>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add the
>>>>>>>>>>>> host to cluster None
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>     so, i guess, maybe Sandvik's setup is still not accessable ?
>>>>>>>>>>>>
>>>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <xiec.fnst at cn.fujitsu.com>
>>>>>>>>>>>> :
>>>>>>>>>>>>
>>>>>>>>>>>>  Hi, Chou
>>>>>>>>>>>>>
>>>>>>>>>>>>>          It seems your rhevm is not setup successfully. I
>>>>>>>>>>>>> suggest you can think about the two possible root cause below:
>>>>>>>>>>>>>
>>>>>>>>>>>>>          1. your /etc/hosts about host/rhevm-vm is configured
>>>>>>>>>>>>> correctly?
>>>>>>>>>>>>>
>>>>>>>>>>>>>          2. your password set in hosted-engine –deploy and
>>>>>>>>>>>>> rhevm-setup is same ?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> If those are not your problem cause, Please provide more log
>>>>>>>>>>>>> about it.
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> *发件人:* users-bounces at ovirt.org [mailto:users-bounces at ovirt.org]
>>>>>>>>>>>>> *代表 *Coffee Chou
>>>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08
>>>>>>>>>>>>> *收件人:* Sandvik Agustin
>>>>>>>>>>>>> *抄送:* users at ovirt.org
>>>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin <
>>>>>>>>>>>>> agustinsandvik at gmail.com>:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi!,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this
>>>>>>>>>>>>> documentation
>>>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have already completed the installation of ovirt engine
>>>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy
>>>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says:
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> (1, 2, 3)[1]: 1
>>>>>>>>>>>>>
>>>>>>>>>>>>> [ ERROR ] Engine is still unreachable
>>>>>>>>>>>>>
>>>>>>>>>>>>>           Engine health status page is not yet reachable.
>>>>>>>>>>>>>
>>>>>>>>>>>>>           To continue make a selection from the options below:
>>>>>>>>>>>>>
>>>>>>>>>>>>>           (1) Continue setup - engine installation is complete
>>>>>>>>>>>>>
>>>>>>>>>>>>>           (2) Power off and restart the VM
>>>>>>>>>>>>>
>>>>>>>>>>>>>           (3) Abort setup
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> what should I do? how to fix this?
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks in advance,
>>>>>>>>>>>>>
>>>>>>>>>>>>> sandvik
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141121/eafc1a9a/attachment-0001.html>

More information about the Users mailing list