[ovirt-users] 答复: Engine is still unreachable
Sandvik Agustin
agustinsandvik at gmail.com
Fri Nov 21 02:19:24 EST 2014
Hi users, chou,
Here's the output of the command
cat /etc/yum.repos.d/
cat: /etc/yum.repos.d/: Is a directory
cat /etc/yum.repos.d/*
# CentOS-Base.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS
updates
# unless you are manually picking other mirrors.
#
# If the mirrorlist= does not work for you, as a fall back you can try the
# remarked out baseurl= line instead.
#
#
[base]
name=CentOS-$releasever - Base
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=os&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
#released updates
[updates]
name=CentOS-$releasever - Updates
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=updates&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
#additional packages that may be useful
[extras]
name=CentOS-$releasever - Extras
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=extras&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
#additional packages that extend functionality of existing packages
[centosplus]
name=CentOS-$releasever - Plus
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=centosplus&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/centosplus/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
#contrib - packages by Centos Users
[contrib]
name=CentOS-$releasever - Contrib
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=contrib&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/contrib/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Debug.repo
#
# The mirror system uses the connecting IP address of the client and the
# update status of each mirror to pick mirrors that are updated to and
# geographically close to the client. You should use this for CentOS
updates
# unless you are manually picking other mirrors.
#
# All debug packages from all the various CentOS-5 releases
# are merged into a single repo, split by BaseArch
#
# Note: packages in the debuginfo repo are currently not signed
#
[base-debuginfo]
name=CentOS-6 - Debuginfo
baseurl=http://debuginfo.centos.org/6/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-Debug-6
enabled=0
[fasttrack]
name=CentOS-6 - fasttrack
mirrorlist=
http://mirrorlist.centos.org/?release=$releasever&arch=$basearch&repo=fasttrack&infra=$infra
#baseurl=http://mirror.centos.org/centos/$releasever/fasttrack/$basearch/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Media.repo
#
# This repo can be used with mounted DVD media, verify the mount point for
# CentOS-6. You can use this repo and yum to install items directly off
the
# DVD ISO that we release.
#
# To use this repo, put in your DVD and use it with the other repos too:
# yum --enablerepo=c6-media [command]
#
# or for ONLY the media repo, do this:
#
# yum --disablerepo=\* --enablerepo=c6-media [command]
[c6-media]
name=CentOS-$releasever - Media
baseurl=file:///media/CentOS/
file:///media/cdrom/
file:///media/cdrecorder/
gpgcheck=1
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
# CentOS-Vault.repo
#
# CentOS Vault holds packages from previous releases within the same CentOS
Version
# these are packages obsoleted by the current release and should usually not
# be used in production
#-----------------
[C6.0-base]
name=CentOS-6.0 - Base
baseurl=http://vault.centos.org/6.0/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.0-updates]
name=CentOS-6.0 - Updates
baseurl=http://vault.centos.org/6.0/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.0-extras]
name=CentOS-6.0 - Extras
baseurl=http://vault.centos.org/6.0/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.0-contrib]
name=CentOS-6.0 - Contrib
baseurl=http://vault.centos.org/6.0/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.0-centosplus]
name=CentOS-6.0 - CentOSPlus
baseurl=http://vault.centos.org/6.0/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------
[C6.1-base]
name=CentOS-6.1 - Base
baseurl=http://vault.centos.org/6.1/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.1-updates]
name=CentOS-6.1 - Updates
baseurl=http://vault.centos.org/6.1/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.1-extras]
name=CentOS-6.1 - Extras
baseurl=http://vault.centos.org/6.1/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.1-contrib]
name=CentOS-6.1 - Contrib
baseurl=http://vault.centos.org/6.1/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.1-centosplus]
name=CentOS-6.1 - CentOSPlus
baseurl=http://vault.centos.org/6.1/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------
[C6.2-base]
name=CentOS-6.2 - Base
baseurl=http://vault.centos.org/6.2/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.2-updates]
name=CentOS-6.2 - Updates
baseurl=http://vault.centos.org/6.2/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.2-extras]
name=CentOS-6.2 - Extras
baseurl=http://vault.centos.org/6.2/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.2-contrib]
name=CentOS-6.2 - Contrib
baseurl=http://vault.centos.org/6.2/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.2-centosplus]
name=CentOS-6.2 - CentOSPlus
baseurl=http://vault.centos.org/6.2/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------
[C6.3-base]
name=CentOS-6.3 - Base
baseurl=http://vault.centos.org/6.3/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.3-updates]
name=CentOS-6.3 - Updates
baseurl=http://vault.centos.org/6.3/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.3-extras]
name=CentOS-6.3 - Extras
baseurl=http://vault.centos.org/6.3/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.3-contrib]
name=CentOS-6.3 - Contrib
baseurl=http://vault.centos.org/6.3/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.3-centosplus]
name=CentOS-6.3 - CentOSPlus
baseurl=http://vault.centos.org/6.3/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------
[C6.4-base]
name=CentOS-6.4 - Base
baseurl=http://vault.centos.org/6.4/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.4-updates]
name=CentOS-6.4 - Updates
baseurl=http://vault.centos.org/6.4/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.4-extras]
name=CentOS-6.4 - Extras
baseurl=http://vault.centos.org/6.4/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.4-contrib]
name=CentOS-6.4 - Contrib
baseurl=http://vault.centos.org/6.4/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.4-centosplus]
name=CentOS-6.4 - CentOSPlus
baseurl=http://vault.centos.org/6.4/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
#-----------------
[C6.5-base]
name=CentOS-6.5 - Base
baseurl=http://vault.centos.org/6.5/os/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.5-updates]
name=CentOS-6.5 - Updates
baseurl=http://vault.centos.org/6.5/updates/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.5-extras]
name=CentOS-6.5 - Extras
baseurl=http://vault.centos.org/6.5/extras/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.5-contrib]
name=CentOS-6.5 - Contrib
baseurl=http://vault.centos.org/6.5/contrib/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[C6.5-centosplus]
name=CentOS-6.5 - CentOSPlus
baseurl=http://vault.centos.org/6.5/centosplus/$basearch/
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-CentOS-6
enabled=0
[epel]
name=Extra Packages for Enterprise Linux 6 - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$basearch
failovermethod=priority
enabled=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
[epel-debuginfo]
name=Extra Packages for Enterprise Linux 6 - $basearch - Debug
#baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch/debug
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=epel-debug-6&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=1
[epel-source]
name=Extra Packages for Enterprise Linux 6 - $basearch - Source
#baseurl=http://download.fedoraproject.org/pub/epel/6/SRPMS
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=epel-source-6&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=1
[epel-testing]
name=Extra Packages for Enterprise Linux 6 - Testing - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/testing/6/$basearch
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=testing-epel6&arch=$basearch
failovermethod=priority
enabled=0
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
[epel-testing-debuginfo]
name=Extra Packages for Enterprise Linux 6 - Testing - $basearch - Debug
#baseurl=
http://download.fedoraproject.org/pub/epel/testing/6/$basearch/debug
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=testing-debug-epel6&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=1
[epel-testing-source]
name=Extra Packages for Enterprise Linux 6 - Testing - $basearch - Source
#baseurl=http://download.fedoraproject.org/pub/epel/testing/6/SRPMS
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=testing-source-epel6&arch=$basearch
failovermethod=priority
enabled=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-6
gpgcheck=1
[ovirt-3.5-epel]
name=Extra Packages for Enterprise Linux 6 - $basearch
#baseurl=http://download.fedoraproject.org/pub/epel/6/$basearch
mirrorlist=
https://mirrors.fedoraproject.org/metalink?repo=epel-6&arch=$basearch
failovermethod=priority
enabled=1
includepkgs=epel-release,python-uinput,puppet,python-lockfile,python-cpopen,python-ordereddict,python-pthreading,python-inotify,python-argparse,novnc,python-ply,python-kitchen,python-daemon,python-websockify,livecd-tools,spice-html5,mom,python-IPy,python-ioprocess,ioprocess,rubygem-rgen
gpgcheck=1
gpgkey=https://dl.fedoraproject.org/pub/epel/RPM-GPG-KEY-EPEL-6
[ovirt-3.5-jpackage-6.0-generic]
name=JPackage 6.0, for generic
mirrorlist=
http://www.jpackage.org/mirrorlist.php?dist=generic&type=free&release=6.0
enabled=1
gpgcheck=1
includepkgs=dom4j,isorelax,jaxen,jdom,msv,msv-xsdlib,relaxngDatatype,servicemix-specs,tomcat5-servlet-2.4-api,ws-jaxme,xalan-j2,xml-commons,xml-commons-jaxp-1.2-apis,xml-commons-resolver11,xom,xpp2,xpp3,antlr3,stringtemplate
gpgkey=http://www.jpackage.org/jpackage.asc
[ovirt-3.5-glusterfs-epel]
name=GlusterFS is a clustered file-system capable of scaling to several
petabytes.
baseurl=
http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/epel-$releasever/$basearch/
enabled=1
skip_if_unavailable=1
gpgcheck=0
[ovirt-3.5-glusterfs-noarch-epel]
name=GlusterFS is a clustered file-system capable of scaling to several
petabytes.
baseurl=
http://download.gluster.org/pub/gluster/glusterfs/LATEST/EPEL.repo/epel-$releasever/noarch
enabled=1
skip_if_unavailable=1
gpgcheck=0
[ovirt-3.5-patternfly1-noarch-epel]
name=Copr repo for patternfly1 owned by patternfly
baseurl=
http://copr-be.cloud.fedoraproject.org/results/patternfly/patternfly1/epel-6-$basearch/
enabled=1
skip_if_unavailable=1
gpgcheck=0
[ovirt-3.5]
name=Latest oVirt 3.5 Release
#baseurl=http://resources.ovirt.org/pub/ovirt-3.5/rpm/el$releasever/
mirrorlist=
http://resources.ovirt.org/pub/yum-repo/mirrorlist-ovirt-3.5-el$releasever
enabled=1
skip_if_unavailable=1
gpgcheck=1
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-ovirt-3.5
On Fri, Nov 21, 2014 at 2:53 PM, Coffee Chou <coffee.zyr at gmail.com> wrote:
> Hi, Sandvik
> you can run:
>
> cat /etc/yum.repo.d/
>
>
> 2014-11-21 14:21 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>:
>
>> Hi,
>>
>>
>> The repo that I have use if
>> http://plain.resources.ovirt.org/pub/yum-repo/ovirt-release35.rpm from
>> this documentation http://www.ovirt.org/Quick_Start_Guide, because the
>> repo that this documentation
>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>> seems not working, http://ovirt.org/releases/ovirt-release.noarch.rpm
>> sudo yum localinstall -y
>> http://ovirt.org/releases/ovirt-release.noarch.rpm
>> ------------------------------
>>
>> This article originally appeared on community.redhat.com. Follow the
>> community on Twitter at @redhatopen <https://twitter.com/redhatopen>,
>> and find us on Facebook <https://www.facebook.com/redhatopen> and Google+
>> <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
>> .
>> sudo yum localinstall -y
>> http://ovirt.org/releases/ovirt-release.noarch.rpm
>> ------------------------------
>>
>> This article originally appeared on community.redhat.com. Follow the
>> community on Twitter at @redhatopen <https://twitter.com/redhatopen>,
>> and find us on Facebook <https://www.facebook.com/redhatopen> and Google+
>> <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
>> .
>> sudo yum localinstall -y
>> http://ovirt.org/releases/ovirt-release.noarch.rpm
>> ------------------------------
>>
>> This article originally appeared on community.redhat.com. Follow the
>> community on Twitter at @redhatopen <https://twitter.com/redhatopen>,
>> and find us on Facebook <https://www.facebook.com/redhatopen> and Google+
>> <https://plus.google.com/u/0/b/113258037797946990391/113258037797946990391/posts>
>> .
>>
>> On Fri, Nov 21, 2014 at 1:51 PM, Coffee Chou <coffee.zyr at gmail.com>
>> wrote:
>>
>>> Hi, Sandvik
>>> I have read the engine.log, it shows:
>>> Cannot find a valid baseurl for repo: base
>>>
>>> can you show me your repo?
>>>
>>> 2014-11-21 12:21 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>:
>>>
>>>> Hi,
>>>>
>>>> I'm sorry I forgot, here's the attachement.
>>>>
>>>> On Fri, Nov 21, 2014 at 12:19 PM, Sandvik Agustin <
>>>> agustinsandvik at gmail.com> wrote:
>>>>
>>>>> Hi,
>>>>>
>>>>> I'm sorry I forgot, here's the attachement.
>>>>>
>>>>> On Fri, Nov 21, 2014 at 12:17 PM, Coffee Chou <coffee.zyr at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi, Sandvik
>>>>>> maybe you forgot to attach your log~ that's
>>>>>> ovirt-hosted-engine-setup, so you can also attach your setup log:-)
>>>>>>
>>>>>> 2014-11-21 11:11 GMT+08:00 Sandvik Agustin <agustinsandvik at gmail.com>
>>>>>> :
>>>>>>
>>>>>>> Hi users,
>>>>>>>
>>>>>>> Chou, here's my I already tried your suggestion right now, but it
>>>>>>> still failed, here's my engine.log and vdsm.log. and one more thing, since
>>>>>>> the time that I started the installation of ovirt-hosted-engine setup, I
>>>>>>> starting to have this kind of error message on my /var/log/message.
>>>>>>>
>>>>>>>
>>>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>>>>> multipath: error getting device
>>>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>>>>> target to table
>>>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: table: 253:2:
>>>>>>> multipath: error getting device
>>>>>>> Nov 21 11:11:20 hmdvhost1 kernel: device-mapper: ioctl: error adding
>>>>>>> target to table
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>>>> can't remove
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>>>> can't remove
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>>>> can't remove
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: remove map (uevent)
>>>>>>> Nov 21 11:11:20 hmdvhost1 multipathd: dm-2: devmap not registered,
>>>>>>> can't remove
>>>>>>>
>>>>>>>
>>>>>>> Thanks in advance
>>>>>>> Sandvik
>>>>>>>
>>>>>>> On Fri, Nov 21, 2014 at 9:42 AM, Coffee Chou <coffee.zyr at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hi, Sandvik
>>>>>>>> it's just a suggestion:-)
>>>>>>>>
>>>>>>>> i think you can have a try, as i don't know my solution worked
>>>>>>>> or not. maybe there are some other people who have encountered this problem
>>>>>>>> before and they can give you some advice:-)
>>>>>>>>
>>>>>>>> 2014-11-20 22:35 GMT+08:00 Sandvik Agustin <
>>>>>>>> agustinsandvik at gmail.com>:
>>>>>>>>
>>>>>>>>> HI Chou,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks, I will try your solution now, and should I resend this
>>>>>>>>> email to users at ovirt.org?
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>> Sandvik
>>>>>>>>>
>>>>>>>>> On Thu, Nov 20, 2014 at 9:28 AM, Coffee Chou <coffee.zyr at gmail.com
>>>>>>>>> > wrote:
>>>>>>>>>
>>>>>>>>>> Hi, Sandvik
>>>>>>>>>> and please don't send the email to me only but to user mail
>>>>>>>>>> list, so everybody can help you :-)
>>>>>>>>>>
>>>>>>>>>> 2014-11-20 9:17 GMT+08:00 Coffee Chou <coffee.zyr at gmail.com>:
>>>>>>>>>>
>>>>>>>>>>> Hi, Sandvik
>>>>>>>>>>> i can see the ERROR message: Command returned failure code 1
>>>>>>>>>>> during SSH session .... you can try these:
>>>>>>>>>>>
>>>>>>>>>>> 1. stop firewall on the hosted_engine_1
>>>>>>>>>>> 2. running command: vdsm-tool configure
>>>>>>>>>>>
>>>>>>>>>>> if it's still failure, please attach your engine.log and
>>>>>>>>>>> vdsm.log
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> 2014-11-20 7:55 GMT+08:00 Sandvik Agustin <
>>>>>>>>>>> agustinsandvik at gmail.com>:
>>>>>>>>>>>
>>>>>>>>>>>> Hi Chou,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I have successfully install the hosted engine, but at the end
>>>>>>>>>>>> of the installation I have this kind of error message
>>>>>>>>>>>>
>>>>>>>>>>>> To continue make a selection from the options below:
>>>>>>>>>>>> (1) Continue setup - engine installation is complete
>>>>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>>>>> (3) Abort setup
>>>>>>>>>>>>
>>>>>>>>>>>> (1, 2, 3)[1]:
>>>>>>>>>>>> [ INFO ] Engine replied: DB Up!Welcome to Health Status!
>>>>>>>>>>>> Enter the name of the cluster to which you want to
>>>>>>>>>>>> add the host (Default) [Default]:
>>>>>>>>>>>> [ INFO ] Waiting for the host to become operational in the
>>>>>>>>>>>> engine. This may take several minutes...
>>>>>>>>>>>> [ ERROR ] The VDSM host was found in a failed state. Please
>>>>>>>>>>>> check engine and bootstrap installation logs.
>>>>>>>>>>>> [ ERROR ] Unable to add hosted_engine_1 to the manager
>>>>>>>>>>>> Please shutdown the VM allowing the system to launch
>>>>>>>>>>>> it as a monitored service.
>>>>>>>>>>>> The system will wait until the VM is down.
>>>>>>>>>>>> [ INFO ] Enabling and starting HA services
>>>>>>>>>>>> Hosted Engine successfully set up
>>>>>>>>>>>> [ INFO ] Stage: Clean up
>>>>>>>>>>>> [ INFO ] Generating answer file
>>>>>>>>>>>> '/etc/ovirt-hosted-engine/answers.conf'
>>>>>>>>>>>> [ INFO ] Answer file '/etc/ovirt-hosted-engine/answers.conf'
>>>>>>>>>>>> has been updated
>>>>>>>>>>>> [ INFO ] Stage: Pre-termination
>>>>>>>>>>>> [ INFO ] Stage: Termination
>>>>>>>>>>>>
>>>>>>>>>>>> The ovirt webadmin is accessible, but my hosted_engine_1 status
>>>>>>>>>>>> failed. I tried to activate it inside the webadmin, but it say's Error
>>>>>>>>>>>> while executing action:
>>>>>>>>>>>>
>>>>>>>>>>>> hosted_engine_1:
>>>>>>>>>>>>
>>>>>>>>>>>> - Cannot activate Host. Host has no unique id.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> and when I try to reinstall it on the webadmin, nothing happen
>>>>>>>>>>>> it still failed status.
>>>>>>>>>>>>
>>>>>>>>>>>> I hope you can help me.
>>>>>>>>>>>>
>>>>>>>>>>>> Please see attach for screenshot.
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks in advance.
>>>>>>>>>>>> sandvik
>>>>>>>>>>>>
>>>>>>>>>>>> On Wed, Nov 19, 2014 at 10:32 PM, Sandvik Agustin <
>>>>>>>>>>>> agustinsandvik at gmail.com> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>>> Hi guys,
>>>>>>>>>>>>>
>>>>>>>>>>>>> First of all I want to thank you for replying my email.
>>>>>>>>>>>>> @Chou, yes I can access the engine webadmin.
>>>>>>>>>>>>> @Chao, I've tried the no. 1 option and it worked, when I check
>>>>>>>>>>>>> my /etc/hosts I have hostname conflict, then the ovirt engine is now
>>>>>>>>>>>>> reachable, but there's another error message, it say's invalid certificate.
>>>>>>>>>>>>> Is this because of I've put different FQDN during the installation process?
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Wed, Nov 19, 2014 at 11:40 AM, Coffee Chou <
>>>>>>>>>>>>> coffee.zyr at gmail.com> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, Chao
>>>>>>>>>>>>>> You may make a mistake, that's not my setup :-)
>>>>>>>>>>>>>> But i don't think it's a problem of password. If the
>>>>>>>>>>>>>> passwords were not the same, it will throw an ERROR of:
>>>>>>>>>>>>>> [ ERROR ] Cannot automatically add the host to cluster None:
>>>>>>>>>>>>>> HTTP Status 401
>>>>>>>>>>>>>> [ ERROR ] Failed to execute stage 'Closing up': Cannot add
>>>>>>>>>>>>>> the host to cluster None
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> so, i guess, maybe Sandvik's setup is still not
>>>>>>>>>>>>>> accessable ?
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> 2014-11-19 11:12 GMT+08:00 Xie, Chao <
>>>>>>>>>>>>>> xiec.fnst at cn.fujitsu.com>:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi, Chou
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> It seems your rhevm is not setup successfully. I
>>>>>>>>>>>>>>> suggest you can think about the two possible root cause below:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 1. your /etc/hosts about host/rhevm-vm is
>>>>>>>>>>>>>>> configured correctly?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2. your password set in hosted-engine –deploy and
>>>>>>>>>>>>>>> rhevm-setup is same ?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> If those are not your problem cause, Please provide more log
>>>>>>>>>>>>>>> about it.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> *发件人:* users-bounces at ovirt.org [mailto:
>>>>>>>>>>>>>>> users-bounces at ovirt.org] *代表 *Coffee Chou
>>>>>>>>>>>>>>> *发送时间:* 2014年11月19日 10:08
>>>>>>>>>>>>>>> *收件人:* Sandvik Agustin
>>>>>>>>>>>>>>> *抄送:* users at ovirt.org
>>>>>>>>>>>>>>> *主题:* Re: [ovirt-users] Engine is still unreachable
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi, can you access Engine webadmin with this ERROR message?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> 2014-11-18 19:45 GMT+08:00 Sandvik Agustin <
>>>>>>>>>>>>>>> agustinsandvik at gmail.com>:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi!,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have install ovirt 3.4 on centos 6.6 following this
>>>>>>>>>>>>>>> documentation
>>>>>>>>>>>>>>> http://community.redhat.com/blog/2014/03/up-and-running-with-ovirt-3-4/
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> I have already completed the installation of ovirt engine
>>>>>>>>>>>>>>> inside of the vm, when going back to hosted-engine --deploy
>>>>>>>>>>>>>>> terminal and choosing 1 the hosted-engine --deploy says:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> (1, 2, 3)[1]: 1
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> [ ERROR ] Engine is still unreachable
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Engine health status page is not yet reachable.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> To continue make a selection from the options
>>>>>>>>>>>>>>> below:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> (1) Continue setup - engine installation is
>>>>>>>>>>>>>>> complete
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> (2) Power off and restart the VM
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> (3) Abort setup
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> what should I do? how to fix this?
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks in advance,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> sandvik
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>> Users mailing list
>>>>>>>>>>>>>>> Users at ovirt.org
>>>>>>>>>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141121/33fe9964/attachment-0001.html>
More information about the Users
mailing list