[ovirt-users] 答复: 答复: How to Use VLAN?

[Lior Vernia]

Hi Xie,

Yes, that's exactly what it means, and you indeed need to create a VLAN
device manually and then choose it in the interactive script. CCing
Sandro to assist with how this is most easily done.

Yours, Lior.

On 21/11/14 03:34, Xie, Chao wrote:
> Hi, Lior
> 	Thanks for replying. Yesterday I tested  VLAN successfully  in the normal 3.5 environment. As the release Note, (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted Engine 3.5 supports the new function of VLAN。 Is it meaning the "rhevm" logical network use "VLAN" ? If  I am right, can you help to teach me how to use it? (I think it must be creating a VLAN manually before deploy hosted engine, then we should choose the vlan when deploying?)
> 
> -----邮件原件-----
> 发件人: Lior Vernia [mailto:lvernia at redhat.com] 
> 发送时间: 2014年11月19日 16:50
> 收件人: Xie, Chao/谢 超
> 抄送: users at ovirt.org
> 主题: Re: 答复: [ovirt-users] How to Use VLAN?
> 
> 
> 
> On 19/11/14 10:45, Xie, Chao wrote:
>> Hi, Lior:
>> 	I configure the switch port connecting the host's NIC which hold the "testvlan" logical network. I try the NIC hold normal logical network ,VM using the logical network worked well. But if I hold the VLAN logical network, the VM using it didn't get IP.   
>>
> 
> Hello Xie,
> 
> This is what leads me to believe that your DHCP server (which is in charge of allocating IP addresses) only receives non-tagged traffic. Is it possible you need to configure other ports to pass the VLAN-tagged traffic?
> 
> Lior.
> 
>> -----邮件原件-----
>> 发件人: Lior Vernia [mailto:lvernia at redhat.com]
>> 发送时间: 2014年11月19日 16:09
>> 收件人: Xie, Chao/谢 超
>> 抄送: users at ovirt.org
>> 主题: Re: [ovirt-users] How to Use VLAN?
>>
>>
>>
>> On 19/11/14 05:01, Xie, Chao wrote:
>>> Hi,all
>>>
>>>          Recently I test the VLAN and have some problems. I configure 
>>> the Logical network “testvlan” with “VLAN tagged” and assigned it to 
>>> hosts’ NIC. Then I create a VM using  “testvlan” and found the vm 
>>> can’t get IP . Does anyone have some ideas about VLAN?
>>>
>>>          p.s. I already configure the switch port as TRUNK mode and 
>>> the vlan id is 1 (default value).
>>>
>>
>> Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to allow traffic on this VLAN?
>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>