[ovirt-users] separate ovirtmgmt from glusterfs traffic

Lior Vernia lvernia at redhat.com
Mon Nov 17 13:15:12 UTC 2014



On 17/11/14 15:10, Demeter Tibor wrote:
> Hello,
> 
> Thank you for the detailed reply.
> 
> Yes, the vms are used an independent network/network interfaces for access the internet.
> So, in this case I could separate the high glusterfs traffic from ovirt management traffic when I disable "vm" network on ovirtmgmt interface.
> 

And since host-level QoS is not yet available in oVirt, you might want
to configure your switch(es) to limit gluster traffic (by VLAN tag) to
not "hog" the (presumably shared) network infrastructure.

> I will try-out this night this feature.
> 
> Thanks a lot,
> 
> Tibor
> 
> 
> 
> ----- Eredeti üzenet -----
>> Hi Tibor,
>>
>> On 13/11/14 13:41, Demeter Tibor wrote:
>>> Hi,
>>>
>>> I have a 3 node gluster based cluster. There are 3x3 Nic with bonding.
>>> Sometimes the management is very slow because high gluster traffic.
>>>
>>> Is it possible to separate ovirtmgmt network from glusterfs traffic?
>>> I have only one interface (ovirtmgmt) for all of services (migration, etc).
>>> I just wondering I will make three VLANs for these services and use the
>>> QoS function. But how can specify glusterfs for use an other vlan for
>>> gluster traffic an a other one for management?
>>
>> This generally sounds like a good plan, but note that QoS on the
>> host-level will only become available in oVirt 3.6 (it might become
>> available soon on master, if you're feeling lucky...).
>>
>> VM-level QoS (available since 3.3) won't help you with "administrative"
>> traffic (i.e. traffic that isn't going into / coming out of the VMs
>> themselves).
>>
>>> Also, I have more questions about this:
>>>
>>> - If I specify a VLAN on ovirtmgmt, then what happend on nodes? I'm
>>> afraid the nodes will lost the connection with each other nodes.
>>
>> If the switch allows this VLAN to reach all hosts, there shouldn't be a
>> problem; since oVirt 3.4 the VLAN tagging should "propagate" to all
>> active hosts. However, see my comment below concerning "VM network".
>>
>>> - Is it possible on a live system? What will happen with the mounted
>>> glustefs based datastores?
>>
>> I'm not knowledgeable about gluster specifics, but let's see if I can
>> help. What's the current situation with the gluster network, is it
>> already VLAN-tagged? If it is and you're not moving it to another
>> interface on the hosts, I *think* things should be fine.
>>
>>> - What does "vm network" mean on ovirtmgmt interface? Can I use this for
>>> seperate network traffic?
>>
>> This means that a bridge is created for this network on hosts. If VMs
>> don't use this network (i.e. virtual interfaces are assigned profiles of
>> ovirtmgmt), you can make it non-VM (with no VLAN tagging) and have it
>> assigned to the same host interface as VLAN-tagged networks (I would say
>> this is less risky than VLAN-tagging ovirtmgmt).
>>
>>>
>>>
>>> My plan is
>>> - vlan.101 ovirtmgmt
>>> - vlan 102 glusterfs
>>> - vlan 103 migration
>>> - vlan 104 display
>>>
>>> What is the recommended procedure of this?
>>>
>>> Thanks in advance,
>>>
>>> Regards,
>>>
>>> Tibor
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>



More information about the Users mailing list