[ovirt-users] USB redirect
Lev Veyde
lveyde at redhat.com
Sun Nov 23 08:42:23 UTC 2014
Hi Michal,
As far as I know there is no need to install something inside VM for the Native USB redirection to function properly, thus nothing related is included on the oVirt WGT ISO.
The user/admin only needs to properly configure the VM for Native USB redirection and install the Spice client.
I forwarded the issue to the Spice team, they could properly point to the issue.
Thanks in advance,
Lev Veyde.
----- Original Message -----
From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
To: "Juan Jose" <jj197005 at gmail.com>, "Lev Veyde" <lveyde at redhat.com>
Cc: "users at ovirt.org List" <users at ovirt.org>
Sent: Friday, November 21, 2014 3:07:09 PM
Subject: Re: [ovirt-users] USB redirect
On Nov 13, 2014, at 12:00 , Juan Jose <jj197005 at gmail.com> wrote:
> Hello Michal and everybody,
>
> I'm sorry but I have downloaded ovirt-guest-tools from URL you gave me but the driver usbredir is not there. Is it normal or maybe it is in another resource?
>
> As the oVirt documentation says, when this driver is installed a new USB windows service will be started in the client, but after execute the ovirt-guest-tool setup and finish the installation there is not any USB new service in my Windows client.
>
> Is it possible that this usbredir driver is not in this ISO?
adding Lev who builds the ISO…can you please check?
Thanks,
michal
>
> Many thanks in advanced,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose <jj197005 at gmail.com> wrote:
> Many thanks Michal,
>
> I will try it and I will try to upgrade my oVirt 3.4.
>
> Thanks again and best regards,
>
> Juanjo.
>
> On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek <michal.skrivanek at redhat.com> wrote:
>
> On Nov 12, 2014, at 16:39 , Juan Jose <jj197005 at gmail.com> wrote:
>
> > Hello Michal or everybody,
> >
> > Could you tell me where can I get or download ovirt-guest-tool.iso?
>
> Hi,
> it's a regular part of the 3.5 release...
> http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> enjoy!:)
>
> Thanks,
> michal
>
> >
> > Many thanks in advanced,
> >
> > Juanjo.
> >
> >
> > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek <michal.skrivanek at redhat.com> wrote:
> >
> > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005 at gmail.com> wrote:
> >
> > > Thank you very much Michal, If I have checked Device administrator in my Windows 7 VM and as you can see in the attached image, the USB device is correctly installed. But when I click "File" in remote-viewer "USB device selection" appears in grey and I can't select any USB device.
> > >
> > > Is there any other requirement to be able redirect USB devices?, Is it necessary to install usbclerk in Windows clients to redirect USB to the Windows guest?
> >
> > usbredir drivers yes, you need them, they should be on the guest tools iso
> >
> > Thanks,
> > michal
> >
> > >
> > > Many thanks in advanced,
> > >
> > > Juanjo.
> > >
> > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek <michal.skrivanek at redhat.com> wrote:
> > >
> > > On Nov 10, 2014, at 17:54 , Juan Jose <jj197005 at gmail.com> wrote:
> > >
> > > > Hello everybody,
> > > >
> > > > I have an oVirt 3.4 deployment and I have some Windows 7 Enterprise 32 bits guests. I can't redirect USB from a Windows 7 client. I'm using remote - viewer as console. Also I have observed something wrong in my administration portal. The oVirt documentation says that I have to select Native USB mode in console properties in VM configuration
> > >
> > > yes, that's the only supported way
> > > you should see the USB controller in devices
> > >
> > > > but after select this mode, it doesn't remain. If I check this value in console configuration again I can see disabled, native mode value have been changed.
> > >
> > > there used to be such issue in 3.4..it is fixed in 3.5 already.
> > > It should be a UI problem only…
> > >
> > > Thanks,
> > > michal
> > >
> > > >
> > > > Is there someone have had this problem?, and how I can solve it?, is it necessary to install in Windows clients us clerk software?
> > > >
> > > > Many thanks in advanced.
> > > >
> > > > Juanjo.
> > > > _______________________________________________
> > > > Users mailing list
> > > > Users at ovirt.org
> > > > http://lists.ovirt.org/mailman/listinfo/users
> > >
> > >
> > > <DeviceAdministrator.png>
> >
> >
>
>
>
More information about the Users
mailing list