[ovirt-users] 答复: 答复: 答复: How to Use VLAN?
Xie, Chao
xiec.fnst at cn.fujitsu.com
Mon Nov 24 02:02:45 UTC 2014
Dear Lior,Sandro
Lior, Thanks for replying~
Sandro, can u help to teach me the easiest way to do VLAN in Hosted Engine Environment?
-----邮件原件-----
发件人: Lior Vernia [mailto:lvernia at redhat.com]
发送时间: 2014年11月23日 16:02
收件人: Xie, Chao/谢 超
抄送: users at ovirt.org; Sandro Bonazzola
主题: Re: 答复: 答复: [ovirt-users] How to Use VLAN?
Hi Xie,
Yes, that's exactly what it means, and you indeed need to create a VLAN device manually and then choose it in the interactive script. CCing Sandro to assist with how this is most easily done.
Yours, Lior.
On 21/11/14 03:34, Xie, Chao wrote:
> Hi, Lior
> Thanks for replying. Yesterday I tested VLAN successfully in the
> normal 3.5 environment. As the release Note,
> (http://www.ovirt.org/OVirt_3.5_Release_Notes), Hosted Engine 3.5
> supports the new function of VLAN。 Is it meaning the "rhevm" logical
> network use "VLAN" ? If I am right, can you help to teach me how to
> use it? (I think it must be creating a VLAN manually before deploy
> hosted engine, then we should choose the vlan when deploying?)
>
> -----邮件原件-----
> 发件人: Lior Vernia [mailto:lvernia at redhat.com]
> 发送时间: 2014年11月19日 16:50
> 收件人: Xie, Chao/谢 超
> 抄送: users at ovirt.org
> 主题: Re: 答复: [ovirt-users] How to Use VLAN?
>
>
>
> On 19/11/14 10:45, Xie, Chao wrote:
>> Hi, Lior:
>> I configure the switch port connecting the host's NIC which hold the "testvlan" logical network. I try the NIC hold normal logical network ,VM using the logical network worked well. But if I hold the VLAN logical network, the VM using it didn't get IP.
>>
>
> Hello Xie,
>
> This is what leads me to believe that your DHCP server (which is in charge of allocating IP addresses) only receives non-tagged traffic. Is it possible you need to configure other ports to pass the VLAN-tagged traffic?
>
> Lior.
>
>> -----邮件原件-----
>> 发件人: Lior Vernia [mailto:lvernia at redhat.com]
>> 发送时间: 2014年11月19日 16:09
>> 收件人: Xie, Chao/谢 超
>> 抄送: users at ovirt.org
>> 主题: Re: [ovirt-users] How to Use VLAN?
>>
>>
>>
>> On 19/11/14 05:01, Xie, Chao wrote:
>>> Hi,all
>>>
>>> Recently I test the VLAN and have some problems. I
>>> configure the Logical network “testvlan” with “VLAN tagged” and
>>> assigned it to hosts’ NIC. Then I create a VM using “testvlan” and
>>> found the vm can’t get IP . Does anyone have some ideas about VLAN?
>>>
>>> p.s. I already configure the switch port as TRUNK mode and
>>> the vlan id is 1 (default value).
>>>
>>
>> Which switch port? Maybe the port(s) leading to your DHCP server aren't configured to allow traffic on this VLAN?
>>
>>>
>>>
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org
>>> http://lists.ovirt.org/mailman/listinfo/users
>>>
More information about the Users
mailing list