[ovirt-users] USB redirect

Juan Jose jj197005 at gmail.com
Mon Nov 24 12:04:44 UTC 2014


Thank you very much David,

Now I have clear the issue.

Juanjo.

On Mon, Nov 24, 2014 at 12:19 PM, David Jaša <djasa at redhat.com> wrote:

> Hi Juan,
>
> Refer to this post, the state of affairs didn't chagne since then:
> http://lists.ovirt.org/pipermail/users/2013-May/014429.html
>
> David
>
>
> On Po, 2014-11-24 at 11:48 +0100, Juan Jose wrote:
> > Hello Lev and Michal and everybody,
> >
> >
> > My main question is:
> >
> > Is it necessary to install in Windows 7 client, no in the guest, the
> > usbclerk to be able to get USB pen drive into the VM from the Windows
> > 7 client?, in afirmative case, where can I get usbclerk?
> >
> >
> > Many thanks in advanced,
> >
> >
> > Juanjo.
> >
> >
> > On Sun, Nov 23, 2014 at 9:42 AM, Lev Veyde <lveyde at redhat.com> wrote:
> >         Hi Michal,
> >
> >         As far as I know there is no need to install something inside
> >         VM for the Native USB redirection to function properly, thus
> >         nothing related is included on the oVirt WGT ISO.
> >
> >         The user/admin only needs to properly configure the VM for
> >         Native USB redirection and install the Spice client.
> >
> >         I forwarded the issue to the Spice team, they could properly
> >         point to the issue.
> >
> >         Thanks in advance,
> >         Lev Veyde.
> >
> >         ----- Original Message -----
> >         From: "Michal Skrivanek" <michal.skrivanek at redhat.com>
> >         To: "Juan Jose" <jj197005 at gmail.com>, "Lev Veyde"
> >         <lveyde at redhat.com>
> >         Cc: "users at ovirt.org List" <users at ovirt.org>
> >         Sent: Friday, November 21, 2014 3:07:09 PM
> >         Subject: Re: [ovirt-users] USB redirect
> >
> >
> >         On Nov 13, 2014, at 12:00 , Juan Jose <jj197005 at gmail.com>
> >         wrote:
> >
> >         > Hello Michal and everybody,
> >         >
> >         > I'm sorry but I have downloaded ovirt-guest-tools from URL
> >         you gave me but the driver usbredir is not there. Is it normal
> >         or maybe it is in another resource?
> >         >
> >         > As the oVirt documentation says, when this driver is
> >         installed a new USB windows service will be started in the
> >         client, but after execute the ovirt-guest-tool setup and
> >         finish the installation there is not any USB new service in my
> >         Windows client.
> >         >
> >         > Is it possible that this usbredir driver is not in this ISO?
> >
> >         adding Lev who builds the ISO…can you please check?
> >
> >         Thanks,
> >         michal
> >
> >         >
> >         > Many thanks in advanced,
> >         >
> >         > Juanjo.
> >         >
> >         > On Wed, Nov 12, 2014 at 4:55 PM, Juan Jose
> >         <jj197005 at gmail.com> wrote:
> >         > Many thanks Michal,
> >         >
> >         > I will try it and I will try to upgrade my oVirt 3.4.
> >         >
> >         > Thanks again and best regards,
> >         >
> >         > Juanjo.
> >         >
> >         > On Wed, Nov 12, 2014 at 4:45 PM, Michal Skrivanek
> >         <michal.skrivanek at redhat.com> wrote:
> >         >
> >         > On Nov 12, 2014, at 16:39 , Juan Jose <jj197005 at gmail.com>
> >         wrote:
> >         >
> >         > > Hello Michal or everybody,
> >         > >
> >         > > Could you tell me where can I get or download
> >         ovirt-guest-tool.iso?
> >         >
> >         > Hi,
> >         > it's a regular part of the 3.5 release...
> >         >
> >         http://resources.ovirt.org/pub/ovirt-3.5/iso/ovirt-guest-tools/
> >         > enjoy!:)
> >         >
> >         > Thanks,
> >         > michal
> >         >
> >         > >
> >         > > Many thanks in advanced,
> >         > >
> >         > > Juanjo.
> >         > >
> >         > >
> >         > > On Tue, Nov 11, 2014 at 12:15 PM, Michal Skrivanek
> >         <michal.skrivanek at redhat.com> wrote:
> >         > >
> >         > > On Nov 11, 2014, at 11:08 , Juan Jose <jj197005 at gmail.com>
> >         wrote:
> >         > >
> >         > > > Thank you very much Michal, If I have checked Device
> >         administrator in my Windows 7 VM and as you can see in the
> >         attached image, the USB device is correctly installed. But
> >         when I click "File" in remote-viewer "USB device selection"
> >         appears in grey and I can't select any USB device.
> >         > > >
> >         > > > Is there any other requirement to be able redirect USB
> >         devices?, Is it necessary to install usbclerk in Windows
> >         clients to redirect USB to the Windows guest?
> >         > >
> >         > > usbredir drivers yes, you need them, they should be on the
> >         guest tools iso
> >         > >
> >         > > Thanks,
> >         > > michal
> >         > >
> >         > > >
> >         > > > Many thanks in advanced,
> >         > > >
> >         > > > Juanjo.
> >         > > >
> >         > > > On Tue, Nov 11, 2014 at 8:23 AM, Michal Skrivanek
> >         <michal.skrivanek at redhat.com> wrote:
> >         > > >
> >         > > > On Nov 10, 2014, at 17:54 , Juan Jose
> >         <jj197005 at gmail.com> wrote:
> >         > > >
> >         > > > > Hello everybody,
> >         > > > >
> >         > > > > I have  an oVirt 3.4 deployment and I have some
> >         Windows 7 Enterprise 32 bits guests. I can't redirect USB from
> >         a Windows 7 client. I'm using remote - viewer as console. Also
> >         I have observed something wrong in my administration portal.
> >         The oVirt documentation says that I have to select Native USB
> >         mode in console properties in VM configuration
> >         > > >
> >         > > > yes, that's the only supported way
> >         > > > you should see the USB controller in devices
> >         > > >
> >         > > > > but after select this mode, it doesn't remain. If I
> >         check this  value in console configuration again I can see
> >         disabled, native mode value have been changed.
> >         > > >
> >         > > > there used to be such issue in 3.4..it is fixed in 3.5
> >         already.
> >         > > > It should be a UI problem only…
> >         > > >
> >         > > > Thanks,
> >         > > > michal
> >         > > >
> >         > > > >
> >         > > > > Is there someone have had this problem?, and how I can
> >         solve it?, is it necessary to install in Windows clients us
> >         clerk software?
> >         > > > >
> >         > > > > Many thanks in advanced.
> >         > > > >
> >         > > > > Juanjo.
> >         > > > > _______________________________________________
> >         > > > > Users mailing list
> >         > > > > Users at ovirt.org
> >         > > > > http://lists.ovirt.org/mailman/listinfo/users
> >         > > >
> >         > > >
> >         > > > <DeviceAdministrator.png>
> >         > >
> >         > >
> >         >
> >         >
> >         >
> >
> >
> >
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141124/fbc1cd6f/attachment-0001.html>


More information about the Users mailing list