[ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)

[Ricardo Esteves]

Hi, here it goes:

ethtool -i eth3

driver: bnx2
version: 2.2.4g
firmware-version: bc 5.2.3
bus-info: 0000:06:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: no

On 07-10-2014 21:57, Federico Simoncelli wrote:
> ----- Original Message -----
>> From: "Ricardo Esteves" <ricardo.m.esteves at gmail.com>
>> To: "Federico Simoncelli" <fsimonce at redhat.com>
>> Cc: users at ovirt.org
>> Sent: Tuesday, October 7, 2014 8:44:19 PM
>> Subject: Re: [ovirt-users] oVirt 3.2 - iSCSI offload (broadcom - bnx2i)
>>
>> cat /var/lib/iscsi/ifaces/eth3
>> # BEGIN RECORD 6.2.0-873.10.el6
>> iface.iscsi_ifacename = eth3
>> iface.transport_name = tcp
>> iface.vlan_id = 0
>> iface.vlan_priority = 0
>> iface.iface_num = 0
>> iface.mtu = 0
>> iface.port = 0
>> # END RECORD
>>
>> Is there anyway to tell ovirt to use bnx2i instead of tcp?
> Hi Ricardo, can you paste the output of:
>
>   # ethtool -i eth3
>
> Thanks,