[ovirt-users] iSCSI connection to a LUN - EMC CX4-120 - Login OK but no LUN
vered at redhat.com
Thu Oct 23 14:12:56 UTC 2014
The vdsm log doesn't have the correlating time span of when I estimate the error occurred on the engine log.
Please check if it was rotated and send the relevant log (I see a discovery error on 2014-10-22 09:11:36 ).
I'd like to better understand what you did.
The flow when adding as iSCSI domain is first discover targets by pressing the 'Discover' button, and only then pressing the 'log in' button.
As far as I can see in the engine log, you already hit the wall by discovering, not even getting to log in. After this button is hit is also when you should see the LUNs, but you say you hit the login button and that it functions well, so I don't exactly understand the flow.
----- Original Message -----
> From: "Nicolas Ecarnot" <nicolas at ecarnot.net>
> To: "Vered Volansky" <vered at redhat.com>
> Cc: users at ovirt.org
> Sent: Wednesday, October 22, 2014 11:24:50 AM
> Subject: Re: [ovirt-users] iSCSI connection to a LUN - EMC CX4-120 - Login OK but no LUN
> Hi Vered,
> Le 22/10/2014 09:40, Vered Volansky a écrit :
> > Hi,
> > Please attach send the full engine and vdsm logs to the list.
> Here they are (I don't know if they will be authorized?)
> > Also - what version are you using.
> > Is this an upgrade? If so - which versions?
> This is a clean new install.
> [root at serv-mvm-adms01 tmp]# rpm -qa|grep -i virt
> [root at serv-vm-adms02 tmp]# rpm -qa|grep -i virt
> Nicolas Ecarnot
> > Vered
> > ----- Original Message -----
> >> From: "Nicolas Ecarnot" <nicolas at ecarnot.net>
> >> To: users at ovirt.org
> >> Sent: Tuesday, October 21, 2014 1:18:47 PM
> >> Subject: [ovirt-users] iSCSI connection to a LUN - EMC CX4-120 - Login OK
> >> but no LUN
> >> Hi,
> >> Setting up our third oVirt infra, we are now connecting it to an EMC
> >> CX4-120 SAN.
> >> On this SAN, we have set up a classical storage group, added the
> >> authorized hosts, registered them.
> >> On the oVirt side, we want to create the first master storage domain and
> >> so we give the GUI the right SAN ip, and the iSCSI connection is working.
> >> We see appearing the two virtual IP of the storage processors (A and B),
> >> and the login button reacts well, no error appears.
> >> But no LUN shows up at this point.
> >> Looking at the hosts used by this connection, it appears that the iSCSI
> >> connection worked well, and that the LUN is visible on the host side
> >> ("iscsiadm -m session -P3").
> >> So now, in the web GUI, there is no LUN showing up I could connect to.
> >> I have isolated the relevant logs - the engine one and the vdsm one :
> >> Engine : http://pastebin.com/32Sg85C8
> >> VDSM : http://pastebin.com/BbY6mVSk
> >> I don't know what is missing? May you help me?
> >> --
> >> Nicolas Ecarnot
> >> _______________________________________________
> >> Users mailing list
> >> Users at ovirt.org
> >> http://lists.ovirt.org/mailman/listinfo/users
> Nicolas Ecarnot
> Users mailing list
> Users at ovirt.org
More information about the Users