[ovirt-users] VM => "No bootable device" on Centos 7 VDSM, 6.5 boots perfectly

[Tiemen Ruiten]

No PXE involved for the hosts nor for the VMs.

On 26 October 2014 21:04, Matt . <yamakasi.014 at gmail.com> wrote:

> Tiemen,
>
> Are you PXE booting or are it normal installs ?
>
> Cheers,
>
> Matt
>
> 2014-10-26 14:43 GMT+01:00 Matt . <yamakasi.014 at gmail.com>:
> > Hi,
> >
> > Thanks for your reply!
> >
> > I think I just found out that it's a Firewall issue on CentOS 7. I
> > have them normally off, but these were on as that should be setup
> > right with ovirt.
> >
> > When I turn it off console seems to connect better and servers seem to
> > be able to boot from
> > their mounted disks over NFS.
> >
> > I will update the bugreport!
> >
> > Thanks again.
> >
> > Cheers,
> >
> > Matt
> >
> > 2014-10-26 14:34 GMT+01:00 Tiemen Ruiten <t.ruiten at rdmedia.com>:
> >> I have two CentOS 7 hosts in a 3.5 cluster, working fine. My storage
> domain
> >> is iSCSI and I have only one logical network, no VLAN tagging. There's
> one
> >> Centos 7 VM running in there and two Windows Server 2012 R2. Haven't
> tried
> >> Centos 6 yet.
> >>
> >> I have disabled firewalld, because otherwise the ovirt host installation
> >> wouldn't complete.
> >>
> >> On 26 October 2014 02:14, Matt . <yamakasi.014 at gmail.com> wrote:
> >>>
> >>> HI,
> >>>
> >>> I'm still struggeling here with the 3.5 hosts on CentOS 7, no booting
> >>> servers as there is no disk found and connecting to Spice takes around
> >>> 30 seconds.
> >>>
> >>> FreeBSD VM's seem to boot without any issues, CentOS and Ubuntu don't
> >>> as described above.
> >>>
> >>> The 3.4 hosts are still working perfectly on Centos 6.5 with the 3.5
> >>> Engine.
> >>>
> >>> Any usecases on Centos 7 and 3.5 hosts ?
> >>>
> >>> Cheers,
> >>>
> >>> Matt
> >>>
> >>> 2014-10-20 16:46 GMT+02:00 Matt . <yamakasi.014 at gmail.com>:
> >>> > I cannot find the docs atm, but even with a upgraded engine to 3.5,
> same
> >>> > issue.
> >>> >
> >>> >
> >>> > 2014-10-20 16:07 GMT+02:00 Daniel Helgenberger
> >>> > <daniel.helgenberger at m-box.de>:
> >>> >>
> >>> >> On 20.10.2014 15:49, Matt . wrote:
> >>> >>> Hi,
> >>> >>>
> >>> >>> Sorry, I forgot a reply to all.
> >>> >>>
> >>> >>> As far as I understood 3.4 is supported as host on 7.0.
> >>> >> Can you point me to that documentation? As I understood it this was
> a
> >>> >> feature of 3.5 (though I can mix this up with hosted engine).
> >>> >>>  As I'm
> >>> >>> deploying new hosts I thought this was nice, also as it fixes some
> >>> >>> issues on networking at my side.
> >>> >>>
> >>> >>> So to be clear:
> >>> >>>
> >>> >>> ovirt 3.4.1
> >>> >>>
> >>> >>> Engine = CentOS 6.5
> >>> >>> Hosts = CentOS 6.5
> >>> >>> NewHosts = CentOS 7.0
> >>> >>>
> >>> >>> That is not mixed I thought.
> >>> >>>
> >>> >>> Cheers,
> >>> >>>
> >>> >>> Matt
> >>> >>>
> >>> >>
> >>> >> --
> >>> >> Daniel Helgenberger
> >>> >> m box bewegtbild GmbH
> >>> >>
> >>> >> P: +49/30/2408781-22
> >>> >> F: +49/30/2408781-10
> >>> >>
> >>> >> ACKERSTR. 19
> >>> >> D-10115 BERLIN
> >>> >>
> >>> >>
> >>> >> www.m-box.de  www.monkeymen.tv
> >>> >>
> >>> >> Geschäftsführer: Martin Retschitzegger / Michaela Göllner
> >>> >> Handeslregister: Amtsgericht Charlottenburg / HRB 112767
> >>> >>
> >>> _______________________________________________
> >>> Users mailing list
> >>> Users at ovirt.org
> >>> http://lists.ovirt.org/mailman/listinfo/users
> >>
> >>
> >>
> >>
> >> --
> >> Tiemen Ruiten
> >> Systems Engineer
> >> R&D Media
>



-- 
Tiemen Ruiten
Systems Engineer
R&D Media
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20141027/2c6aabe6/attachment-0001.html>