[ovirt-users] FC QLogic question

[Sven Kieske]

Hi,

there is an open bugreport
on node that this firmware is missing, this is fixed in master branch:

https://bugzilla.redhat.com/show_bug.cgi?id=1063001

my advice would be to install a plain centos 6.5 and to not use node
atm.

HTH

On 11/09/14 10:51, Bill Dossett wrote:
> Hi,
> 
> I seem to have run into a problem setting up ovirt with Fibre Channel storage.
> 
> I have a 2MBs SAN and qlogic cards in the nodes.  I used this same setup with RHEV about 6 months ago and it just worked, storage was there no problems.  Now booting with ovirtnode distro, I am seeing
> 
> Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1: Firmware images can be retrieved from: http://ldriver.qlogic.com/firmware/.
> Sep  9 08:01:27 localhost kernel: scsi1 : qla2xxx
> Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1: QLogic QLE2460 - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x.
> Sep  9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1: ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2).
> Sep  9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16

-- 
Mit freundlichen Grüßen / Regards

Sven Kieske

Systemadministrator
Mittwald CM Service GmbH & Co. KG
Königsberger Straße 6
32339 Espelkamp
T: +49-5772-293-100
F: +49-5772-293-333
https://www.mittwald.de
Geschäftsführer: Robert Meyer
St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen