[ovirt-users] Fwd: RE: FC QLogic question
Daniel Helgenberger
daniel.helgenberger at m-box.de
Thu Sep 11 16:16:47 UTC 2014
Hi Sven!
Thanks for the heads up on the BZ.
One question remains;
if the firmware is missing in oVirt node then how come Bill does the module loaded and all the LUNs with lsscsi?
Cheers,
--
Daniel Helgenberger
m box bewegtbild GmbH
P: +49/30/2408781-22
F: +49/30/2408781-10
ACKERSTR. 19
D-10115 BERLIN
www.m-box.de www.monkeymen.tv
> Am 11.09.2014 um 17:29 schrieb "Sven Kieske" <s.kieske at mittwald.de>:
>
> Sorry for top posting, but this thread goes way too long:
>
> please take a look at this BZ:
>
> https://bugzilla.redhat.com/show_bug.cgi?id=1063001
>
> I think this is your issue! I already posted to the
> original thread but somehow nobody seems to read my mail.
>
>> On 11/09/14 14:34, Daniel Helgenberger wrote:
>>
>>> On 11.09.2014 14:23, Fabian Deutsch wrote:
>>> Hey Daniel,
>>>
>>> ----- Original Message -----
>>>>> On 11.09.2014 14:09, Fabian Deutsch wrote:
>>>>> Hey Bill and Daniel,
>>>>>
>>>>> it would indeed be interesting - mandatory - to know if it's qla* or qxl
>>>>> (qxl is IMHO related to graphics).
>>>>> Once we know that I'll see if the bug below fixes it.
>>>> Hello Fabian,
>>>> indeed this was my mistake; while typing the mail I was reading on the
>>>> spice website - so qla is the correct module of course! I already
>>>> replied this to Bill but forgot to cc the list also ...
>>>>
>>>> Also, for the node iso it would make little sense to have the qlx module
>>>> loaded. For completeness, I attach my answer to Bill.
>>> Thanks :)
>>>
>>> So to summarize:
>>> The adapter is recognized on Node?
>>>
>>> But it does not show up in Engine?
>> Bill has to tell, but I think so. I suggested to him this might be
>> because of dm-multipath, multipath.conf might blacklist here. My nodes
>> are plain EL6 and I have multipath enabled - but I do not know if
>> ovirt-node filters for dm-mp devnodes only by default (this would make
>> sense because of iscsi-multipathing in ovirt 3.4).
>>
>> Maybe you can help out on this topic?
>>
>> Thanks!
>>>
>>> Thanks
>>> - fabian
>>>
>>>>> I'd need your help to verify that we are also including all relevant
>>>>> dependencies.
>>>>>
>>>>> Thanks
>>>>> - fabian
>>>>>
>>>>> ----- Original Message -----
>>>>> On 11.09.2014 13:05, Bill Dossett wrote:
>>>>>
>>>>> Hi Daniel,
>>>>>
>>>>> I did a lsmod | grep qxl and it returned nothing... did you perhaps mean
>>>>> qla?
>>>>>
>>>>> [root at ovirt141 ~]# lsmod | grep qla
>>>>> qla2xxx 466573 56
>>>>>
>>>>> I think that is the one
>>>> Indeed, sorry for that.
>>>>
>>>>> lsscsi does list all of the LUNs... so that's working!
>>>> Great!
>>>>
>>>>> But nothing in ovirt engine when I try to add a storage domain.
>>>> Please check back in ovirt engine, with Hosts / Hardware info. You
>>>> should see the adapter there, along with WWN's ect.
>>>>
>>>> I am not quite sure, but AFAIK the node uses dm-multipath by default
>>>> (for iscsi multipathing). So what does:
>>>> # multipath -ll
>>>> list?
>>>>
>>>> Thanks again, I guess I will try and get a bit further with the installs I
>>>> have...
>>>>
>>>> Bill
>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Hi Daniel,
>>>>>>
>>>>>> I did a lsmod | grep qxl and it returned nothing... did you perhaps mean
>>>>>> qla?
>>>>>>
>>>>>> [root at ovirt141 ~]# lsmod | grep qla
>>>>>> qla2xxx 466573 56
>>>>>>
>>>>>> I think that is the one
>>>>>>
>>>>>> lsscsi does list all of the LUNs... so that's working!
>>>>>>
>>>>>> But nothing in ovirt engine when I try to add a storage domain.
>>>>>>
>>>>>> Thanks again, I guess I will try and get a bit further with the installs I
>>>>>> have...
>>>>>>
>>>>>> Bill
>>>>>>
>>>>>>
>>>>>>
>>>>>> -----Original Message-----
>>>>>> From: Daniel Helgenberger [mailto:daniel.helgenberger at m-box.de]
>>>>>> Sent: 11 September 2014 11:53
>>>>>> To: Bill Dossett
>>>>>> Subject: Re: [ovirt-users] FC QLogic question
>>>>>>
>>>>>>> On 11.09.2014 12:17, Bill Dossett wrote:
>>>>>>> Thanks for responding Daniel.
>>>>>> Never mind!
>>>>>>> I was wondering and thought the message may be irrelevant. But yes,
>>>>>>> it doesn't appear to be working. When I try to add a FC storage
>>>>>>> domain, no hosts are showing in the drop down box of hosts. I have
>>>>>>> loaded the latests ovirtnode (3.4.something...) on two hosts now and
>>>>>>> neither are working.
>>>>>> Lets first try to isolate your FC issure. So you are using the latest
>>>>>> ovirt-node? EL6? Keep in mind, the kernel is standard Linux and therefore
>>>>>> should support Qlogic adapters out of the box (IMHO they are the best
>>>>>> supported HBAs in Linux).
>>>>>> Please try a:
>>>>>> # lsmod | grep qxl
>>>>>> to see whatever the qxl module is loaded. Keep in mind you can run into
>>>>>> problems with other conrollers in your host, though I only had this with
>>>>>> LSI
>>>>>> SAS / FC controllers so far.
>>>>>>
>>>>>> Further check on the FC switch if the N port is logged in and the zoning
>>>>>> is
>>>>>> correct.
>>>>>>
>>>>>> Finally, check with
>>>>>> # lsscsi
>>>>>> if you can see the luns.
>>>>>>
>>>>>>> Also having a lot of issues with configuring the network. I configure
>>>>>>> an interface I can ping it, but it shows as unconfigured... on one host
>>>>>>> I have added it to the manager and I see the interfaces anyway, but on
>>>>>>> the second host I configure the eth0, I can ping it, it added to the
>>>>>>> ovirt engine but it shows no NICs. Should I be using an earlier version
>>>>>>> maybe?
>>>>>>>
>>>>>>> thanks again and best regards.
>>>>>>>
>>>>>>>
>>>>>>> *Bill Dossett*
>>>>>>> *Virtualisation Architect*
>>>>>>> *Pitney Bowes - Tech Central***
>>>>>>> 6 Hercules Way, 600 Leavesden Park
>>>>>>> Watford, WD25 7GS
>>>>>>> Phone(+44) (0)1923 279353 | VOIP: 54739353
>>>>>>> Mobile(+44) (0)7775 908612
>>>>>>> bill.dossett at pb.com <mailto:bill.dossett at pb.com> www.pb.com
>>>>>>> <http://www.pb.com/> *In Engineering?**Raise a ticket via Remedy
>>>>>>> Anywhere [HERE
>>>>>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incident
>>>>>>> /newIncident.aspx>]takes
>>>>>>> less than a minute*
>>>>>>>
>>>>>>> *ManageIQ User Guide available* [*HERE
>>>>>>> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB%20
>>>>>>> v4.pdf>*] *Check out the ManageIQ Blog for recent enhancements and
>>>>>>> information [HERE]
>>>>>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.aspx>*
>>>>>>>
>>>>>>> On Sep 11, 2014, at 10:52 AM, Daniel Helgenberger
>>>>>>> <daniel.helgenberger at m-box.de <mailto:daniel.helgenberger at m-box.de>>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Hello Bill,
>>>>>>>>
>>>>>>>> what are your problems acually? Is fibre channel not working (as
>>>>>>>> expected)?
>>>>>>>>
>>>>>>>> The log snippet you provided is completly normal and the messages
>>>>>>>> can safely be ignored. This is also unrelated to oVirt but rather
>>>>>>>> CentOS (or the distro you are running) I suppose.
>>>>>>>>
>>>>>>>> Cheers!
>>>>>>>>
>>>>>>>>> On 11.09.2014 10:51, Bill Dossett wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I seem to have run into a problem setting up ovirt with Fibre Channel
>>>>>>>>> storage.
>>>>>>>>>
>>>>>>>>> I have a 2MBs SAN and qlogic cards in the nodes. I used this same
>>>>>>>>> setup with RHEV about 6 months ago and it just worked, storage was
>>>>>>>>> there no problems. Now booting with ovirtnode distro, I am seeing
>>>>>>>>>
>>>>>>>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-0091:1:
>>>>>>>>> Firmware images can be retrieved from:
>>>>>>>>> http://ldriver.qlogic.com/firmware/.
>>>>>>>>>
>>>>>>>>> Sep 9 08:01:27 localhost kernel: scsi1 : qla2xxx
>>>>>>>>>
>>>>>>>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fb:1:
>>>>>>>>> QLogic QLE2460
>>>>>>>>> - QLogic 4GB FC Single-Port PCI-E HBA for IBM System x.
>>>>>>>>>
>>>>>>>>> Sep 9 08:01:27 localhost kernel: qla2xxx [0000:0c:00.0]-00fc:1:
>>>>>>>>> ISP2432: PCIe (2.5GT/s x4) @ 0000:0c:00.0 hdma+ host#=1 fw=4.00.26 (2).
>>>>>>>>>
>>>>>>>>> Sep 9 08:01:27 localhost kernel: ata_piix 0000:00:1f.1: PCI INT A
>>>>>>>>> -> GSI 16 (level, low) -> IRQ 16
>>>>>>>>>
>>>>>>>>> I have googled the firmware error and it says some cards need a
>>>>>>>>> firmware flash and some don't. These are pretty standard HBAs so I
>>>>>>>>> would think they would be supported out of the box, but maybe not.
>>>>>>>>> Looking at trying to add the firmware looked kind of complex - if I
>>>>>>>>> need to do this, does anyone know of a nice and easy howto guide on
>>>>>>>>> this. I'm just getting started with ovirt and appreciate any help
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Thanks
>>>>>>>>>
>>>>>>>>> *Bill Dossett*
>>>>>>>>>
>>>>>>>>> *Virtualisation Architect*
>>>>>>>>>
>>>>>>>>> *Pitney Bowes - Tech Central***
>>>>>>>>>
>>>>>>>>> 6 Hercules Way, 600 Leavesden Park
>>>>>>>>>
>>>>>>>>> Watford, WD25 7GS
>>>>>>>>>
>>>>>>>>> Phone(+44) (0)1923 279353 | VOIP: 54739353
>>>>>>>>>
>>>>>>>>> Mobile(+44) (0)7775 908612
>>>>>>>>>
>>>>>>>>> bill.dossett at pb.com <mailto:bill.dossett at pb.com>
>>>>>>>>> <mailto:bill.dossett at pb.com>
>>>>>>>>>
>>>>>>>>> www.pb.com <http://www.pb.com> <http://www.pb.com/>
>>>>>>>>>
>>>>>>>>> *In Engineering?**Raise a ticket via Remedy Anywhere [HERE
>>>>>>>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/Lists/Create%20Incid
>>>>>>>>> ent/newIncident.aspx>]takes
>>>>>>>>>
>>>>>>>>> less than a minute*
>>>>>>>>>
>>>>>>>>> *ManageIQ User Guide available*[*HERE
>>>>>>>>> <https://dl.dropbox.com/u/6219441/ManageIQ%20-%20User%20Manual%20PB
>>>>>>>>> %20v4.pdf>*]
>>>>>>>>>
>>>>>>>>> *Check out the ManageIQ Blog for recent enhancements and
>>>>>>>>> information [HERE]
>>>>>>>>> <http://teamsite.inside.pb.com/sites/TCPPM/GES/manageiq/default.asp
>>>>>>>>> x>*
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> -------------------------------------------------------------------
>>>>>>>>> -------------
>>>>>>>>>
>>>>>>>> --
>>>>>>>> Daniel Helgenberger
>>>>>>>> m box bewegtbild GmbH
>>>>>>>>
>>>>>>>> P: +49/30/2408781-22
>>>>>>>> F: +49/30/2408781-10
>>>>>>>>
>>>>>>>> ACKERSTR. 19
>>>>>>>> D-10115 BERLIN
>>>>>>>>
>>>>>>>>
>>>>>>>> www.m-box.de <http://www.m-box.de> www.monkeymen.tv
>>>>>>>> <http://www.monkeymen.tv>
>>>>>>>>
>>>>>>>> Geschäftsführer: Martin Retschitzegger / Michaela Göllner
>>>>>>>> Handeslregister: Amtsgericht Charlottenburg / HRB 112767
>>>>>>>>
>>>>>>> ----------------------------------------------------------------------
>>>>>>> ----------
>>>>>>>
>>>>>> --
>>>>>> Daniel Helgenberger
>>>>>> m box bewegtbild GmbH
>>>>>>
>>>>>> P: +49/30/2408781-22
>>>>>> F: +49/30/2408781-10
>>>>>>
>>>>>> ACKERSTR. 19
>>>>>> D-10115 BERLIN
>>>>>>
>>>>>>
>>>>>> www.m-box.de www.monkeymen.tv
>>>>>>
>>>>>> Geschäftsführer: Martin Retschitzegger / Michaela Göllner
>>>>>> Handeslregister: Amtsgericht Charlottenburg / HRB 112767
>>>>>>
>>>>>>
>>>>>> ________________________________
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Users mailing list
>>>>>> Users at ovirt.org
>>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>>
>>>> --
>>>> Daniel Helgenberger
>>>> m box bewegtbild GmbH
>>>>
>>>> P: +49/30/2408781-22
>>>> F: +49/30/2408781-10
>>>>
>>>> ACKERSTR. 19
>>>> D-10115 BERLIN
>>>>
>>>>
>>>> www.m-box.de www.monkeymen.tv
>>>>
>>>> Geschäftsführer: Martin Retschitzegger / Michaela Göllner
>>>> Handeslregister: Amtsgericht Charlottenburg / HRB 112767
>>>>
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org
>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>
>>
>
> --
> Mit freundlichen Grüßen / Regards
>
> Sven Kieske
>
> Systemadministrator
> Mittwald CM Service GmbH & Co. KG
> Königsberger Straße 6
> 32339 Espelkamp
> T: +49-5772-293-100
> F: +49-5772-293-333
> https://www.mittwald.de
> Geschäftsführer: Robert Meyer
> St.Nr.: 331/5721/1033, USt-IdNr.: DE814773217, HRA 6640, AG Bad Oeynhausen
> Komplementärin: Robert Meyer Verwaltungs GmbH, HRB 13260, AG Bad Oeynhausen
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140911/8ade32e5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 2035 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140911/8ade32e5/attachment-0001.p7s>
More information about the Users
mailing list