[ovirt-users] hosted engine setup on second host fails
Stefan Wendler
stefan.wendler at tngtech.com
Fri Sep 19 12:32:47 UTC 2014
Hi there.
I'm trying to install a hosted-engine on our second node (fist engine
runs on node1).
But I always get the message:
[ ERROR ] Cannot automatically add the host to the Default cluster:
Cannot add Host. Host with the same address already exists.
I'm not entirely sure what I have to do when this message comes, so I
just press ENTER:
#######
To continue make a selection from the options below:
(1) Continue setup - engine installation is complete
(2) Power off and restart the VM
(3) Abort setup
(1, 2, 3)[1]:
########
Is there any other interaction required prior to selecting "1"?
In the Web Gui I get the following message:
X Adding new Host hosted_engine_2 to Cluster Default
Here is the console output:
# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor
and create a VM where you have to install oVirt Engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]:
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
Configuration files: []
Log file:
/var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20140919141012-k2lag6.log
Version: otopi-1.2.3 (otopi-1.2.3-1.el6)
[ INFO ] Hardware supports virtualization
[ INFO ] Bridge ovirtmgmt already created
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
During customization use CTRL-D to abort.
Please specify the storage you would like to use (nfs3,
nfs4)[nfs3]:
Please specify the full shared storage connection path to use
(example: host:/path): <some address>:/volume1
The specified storage location already contains a data domain.
Is this an additional host setup (Yes, No)[Yes]?
[ INFO ] Installing on additional host
Please specify the Host ID [Must be integer, default: 2]:
The Host ID is already known. Is this a re-deployment on an
additional host that was previously set up (Yes, No)[Yes]?
--== SYSTEM CONFIGURATION ==--
[WARNING] A configuration file must be supplied to deploy Hosted Engine
on an additional host.
The answer file may be fetched from the first host using scp.
If you do not want to download it automatically you can abort
the setup answering no to the following question.
Do you want to scp the answer file from the first host? (Yes,
No)[Yes]:
Please provide the FQDN or IP of the first host: <node1.domain>
Enter 'root' user password for host <node1.domain>:
[ INFO ] Answer file successfully downloaded
--== NETWORK CONFIGURATION ==--
The following CPU types are supported by this host:
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
--== HOSTED ENGINE CONFIGURATION ==--
Enter the name which will be used to identify this host inside
the Administrator Portal [hosted_engine_2]:
Enter 'admin at internal' user password that will be used for
accessing the Administrator Portal:
Confirm 'admin at internal' user password:
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Engine FQDN : engine.domain
Bridge name : ovirtmgmt
SSH daemon port : 22
Gateway address : <some address>
Host name for web application : hosted_engine_2
Host ID : 2
Image size GB : 25
Storage connection : <some address>:/volume1
Console type : vnc
Memory size MB : 8192
MAC address : 00:16:3e:3b:8d:66
Boot type : disk
Number of CPUs : 2
CPU Type : model_Westmere
Please confirm installation settings (Yes, No)[No]: yes
[ ERROR ] Invalid value
Please confirm installation settings (Yes, No)[No]: Yes
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Configuring libvirt
[ INFO ] Configuring VDSM
[ INFO ] Starting vdsmd
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Connecting Storage Domain
[ INFO ] Configuring VM
[ INFO ] Updating hosted-engine configuration
[ INFO ] Stage: Transaction commit
[ INFO ] Stage: Closing up
To continue make a selection from the options below:
(1) Continue setup - engine installation is complete
(2) Power off and restart the VM
(3) Abort setup
(1, 2, 3)[1]:
[ INFO ] Engine replied: DB Up!Welcome to Health Status!
[ ERROR ] Cannot automatically add the host to the Default cluster:
Cannot add Host. Host with the same address already exists.
[ INFO ] Waiting for the host to become operational in the engine. This
may take several minutes...
[ INFO ] Still waiting for VDSM host to become operational...
[ INFO ] Still waiting for VDSM host to become operational...
And the stacktrace from the logs:
2014-09-19 14:14:07 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.engine.add_host
add_host._closeup:438 Cannot add the host to the Default cluster
Traceback (most recent call last):
File
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/engine/add_host.py",
line 432, in _closeup
override_iptables=True,
File
"/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/brokers.py",
line 9779, in add
headers={"Expect":expect, "Correlation-Id":correlation_id}
File
"/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
line 88, in add
return self.request('POST', url, body, headers)
File
"/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
line 118, in request
persistent_auth=self._persistent_auth)
File
"/usr/lib/python2.6/site-packages/ovirtsdk/infrastructure/proxy.py",
line 140, in __doRequest
persistent_auth=persistent_auth
File "/usr/lib/python2.6/site-packages/ovirtsdk/web/connection.py",
line 134, in doRequest
raise RequestError, response
RequestError:
status: 409
reason: Conflict
detail: Cannot add Host. Host with the same address already exists.
2014-09-19 14:14:07 ERROR
otopi.plugins.ovirt_hosted_engine_setup.engine.add_host
add_host._closeup:445 Cannot automatically add the host to the Default
cluster:
Cannot add Host. Host with the same address already exists.
Cheers,
Stefan
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 181 bytes
Desc: OpenPGP digital signature
URL: <http://lists.ovirt.org/pipermail/users/attachments/20140919/fd6635b1/attachment-0001.sig>
More information about the Users
mailing list