[ovirt-users] PXE boot issue

[Brandon Merjil]

I'm doing the provision from foreman and not ovirt. So when you provision
from Foreman you cannot do a run once as it is calling the api side of
ovirt.
There is also the fact that when this is done on just libvirt/kvm it works
correctly with the boot order that is PXE first then HD second after the
system has been provisioned.
On Apr 9, 2015 16:38, "Michal Skrivanek" <michal.skrivanek at redhat.com>
wrote:

>
> On Apr 9, 2015, at 08:38 , Brandon Merjil <bmerjil at ken-ohki.org> wrote:
>
> > Hello,
> >
> > I am testing provisioning from foreman 1.8.0 to ovirt 3.5 with both on
> CentOS 7.1503 and have run into an issue after the system has been deployed
> to ovirt.
> > When the guest system reboots after the kickstart completes it loads the
> PXE menu from a the same tftp server which tries to start localboot 0. It
> then tries to boot based on the order that ovirt had set for the guest,
> which is PXE first and HD second.
> > The message I'm seeing is "Booting from local disk...
> > No more network devices
> > No bootable device"
> >
> > If I change the guest boot options to only the virtual HD the guest
> boots up without an issue.
> >
> > I have also done a provision to a plain libvirt/kvm server and had no
> issue after the reboot. Same foreman server and tftp server with PXE menu
> localboot 0 option were used.
> > Any ideas what I might be running into here, and any additional
> information needed.
>
> The boot order is fixed in VM configuration. For initial config/install it
> would be recommended to use Run Once with changed boot order
>
> Thanks,
> michal
>
> > Thanks.
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150409/3f1d6d01/attachment.html>