[ovirt-users] bonding interfaces

[Nathanaël Blanchet]

Hi,

simply follow instructions here 
:http://www.ovirt.org/OVirt_3.5.2_Release_Notes
Notice it is about a RC. The stable release should come very soon now, 
you might wait for it rather than upgrading two times.

Le 17/04/2015 15:47, Bill Dossett a écrit :
>
> Sorry-  I don’t suppose someone could tell me how to upgrade from 
> 3.5.1.1-1.3l6 to 3.5.2rc3 or later…?
>
> I have slowly been getting back into working with Linux – I used to 
> download and compile most things and started to get into RPMs but then 
> my job became windows centric and I am woefully out of date.
>
> Is it as easy as yum update?   As stated this is a PoC so no big deal 
> of I break anything, probably good if I do as that’s how you learn fast!
>
> I’ve read the release notes but that seems to be for major releases.
>
> So any advice is appreciated.
>
> Thanks
>
> Bill
>
> *From:*users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] *On 
> Behalf Of *Bill Dossett
> *Sent:* 17 April 2015 07:25
> *To:* Jorick Astrego; users at ovirt.org
> *Subject:* Re: [ovirt-users] bonding interfaces
>
> Hi, Am using 3.5.1.1-1.el6 – sounds like I need to upgrade…  I guess 
> it’s time to learn how to do that J
>
> *From:*users-bounces at ovirt.org <mailto:users-bounces at ovirt.org> 
> [mailto:users-bounces at ovirt.org] *On Behalf Of *Jorick Astrego
> *Sent:* 17 April 2015 01:34
> *To:* users at ovirt.org <mailto:users at ovirt.org>
> *Subject:* Re: [ovirt-users] bonding interfaces
>
> On 04/16/2015 09:49 PM, Bill Dossett wrote:
>
>     Hi,
>
>     I had a Gluster Cluster running that I setup with oVirt engine…
>     “had” being the operative word here.
>
>     Today I connected the second network interface and then went to
>     the host and tried to bond this interface to the ovirt mgmt.
>     network… this is where the “had” part comes in ;-)
>
>     Now I have no working interfaces at all, can’t ping in or out and
>     all interfaces say they are down, en1, 2, ovrtmgmt and bond0 when
>     I do an ip add (this is centos7)
>
>     I have done this quite a few times on RHEV clusters and it always
>     worked well, very impressed with it.
>
>     The differences are…
>
>     RHEV cluster I was using trunked ports and VLANS
>
>     RHEV I was using 6.4 or 6.5 RHEL
>
>     I think that’s it.
>
>     I haven’t really dug into the /etc/sysconfig/network-scripts to
>     see what normally goes into the config files to create a bonded
>     interface – only to see how to configure my first interface with a
>     vlan and then I let ovirtengine do the rest for me as it worked so
>     wellI
>
>     I guess I may have to rip it out and start over unless anyone has
>     any tips on fixing it.  It’s just PoC anyway, so learning.
>
>     Thanks
>
> Which version of ovirt do you run? We had some of these problems in 
> test before, but since 3.5.2rc3 and CentOS 7.1 the problem has been 
> resolved for us.
>
>
>
>
>
> Met vriendelijke groet, With kind regards,
>
> Jorick Astrego*
>
> Netbulae Virtualization Experts *
>
> ------------------------------------------------------------------------
>
> Tel: 053 20 30 270
>
> 	
>
> info at netbulae.eu <mailto:info at netbulae.eu>
>
> 	
>
> Staalsteden 4-3A
>
> 	
>
> KvK 08198180
>
> Fax: 053 20 30 271
>
> 	
>
> www.netbulae.eu <http://www.netbulae.eu>
>
> 	
>
> 7547 TA Enschede
>
> 	
>
> BTW NL821234584B01
>
> ------------------------------------------------------------------------
>
> ------------------------------------------------------------------------
>
>
> ------------------------------------------------------------------------
>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150420/9975266b/attachment-0001.html>