[ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt

[Jakub Niedermertl]

Ahoj,

I've created a bug https://bugzilla.redhat.com/show_bug.cgi?id=1252534 and assign it to you.

Thanks for help
Jakub

----- Original Message -----
> From: "Ondřej Svoboda" <ondrej at svobodasoft.cz>
> To: users at ovirt.org
> Sent: Tuesday, August 11, 2015 2:06:36 PM
> Subject: Re: [ovirt-users] vdsm keeps removing BOOTPROTO=dhcp from ifcfg-ovirtmgmt
> 
> Ahoj Kubo,
> 
> would you try running 'sudo vdsClient -s 0 setSafeNetworkConfig' right
> after restarting the network service? I think your configuration needs
> be persisted in VDSM's network persistence so it is restored (with the
> same configuration) on startup.
> 
> Anyway, VDSM should be used to configure networks (directly using
> vdsClient or indirectly through oVirt engine or via other means -- RPC).
> Your network may be configured by running (assuming your NIC is eth0):
> 
> vdsClient -s 0 setupNetworks
> 'networks={ovirtmgmt:{nic:eth0,bootproto:dhcp,blockingdhcp:true,bridged:true,stp:false,defaultRoute:false}}'
> 
> If this doesn't help please attach /var/log/vdsm/supervdsm.log or file a
> bug with myself as the assignee :-)
> 
> Thanks,
> Ondra
> 
> On 11.8.2015 13:04, Jakub Niedermertl wrote:
> > Hi all,
> >
> > I'd like my ovirtmgmt bridge to fetch ip address from dhcp, but vdsm keeps
> > removing 'BOOTPROTO=dhcp' from
> > /etc/sysconfig/network-scripts/ifcfg-ovirtmgmt.
> >
> > I set the file as follows:
> >
> >      DEVICE=ovirtmgmt
> >      TYPE=Bridge
> >      DELAY=0
> >      STP=off
> >      ONBOOT=yes
> >      BOOTPROTO=dhcp
> >      MTU=1500
> >      DEFROUTE=no
> >      NM_CONTROLLED=no
> >      IPV6INIT=no
> >
> > call 'sudo systemctl restart network' and ip address is successfully
> > assigned. Then reboot the machine and ip address is not fetched and
> > ifcfg-ovirtmgmt looks like this
> >
> >      # Generated by VDSM version 4.17.0-1240.git487a19e.fc22
> >      DEVICE=ovirtmgmt
> >      TYPE=Bridge
> >      DELAY=0
> >      STP=off
> >      ONBOOT=yes
> >      MTU=1500
> >      DEFROUTE=no
> >      NM_CONTROLLED=no
> >      IPV6INIT=no
> >      HOTPLUG=no
> >
> > Is there any way how to prevent vdsm from removing BOOTPROTO statement or
> > make ovirtmgmt to work with dhcp?
> >
> > Environment:
> > Host: runs in virt-manager vm, Fedora 22
> > vdsm: 4.17.0-1240.git487a19e.fc22 from
> > http://resources.ovirt.org/pub/ovirt-3.6-pre/rpm/fc$releasever/
> >
> > Thanks.
> >
> > Jakub
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>