[ovirt-users] vlan-tagging on non-tagged network

Mon Aug 17 12:05:12 UTC 2015

Hi again,

I just found the reason for the loss of the packages. Either ovirt or 
centos install some ebtables rules in the "nat" table. These rules 
filter ARP packages coming from vnet interfaces. Flushing the table 
solved my problems.
However, I have no idea what the purpose of these rules is, so there 
might be unwanted side-effects to just flushing the rules away.. But for 
now I am happy!

Thanks to Ido for your help!

Regards,
Felix

Am 17.08.2015 um 13:20 schrieb Felix Pepinghege:
> Hi Ido, hi everybody,
>
> sorry that I kept you waiting for two months, I only just found the 
> time to go back to this problem.
>
> You were completely right with your guess. The ethernet frames do 
> appear on the vnet-interface, but not on the bridge. The 
> dropped-counter seems to be independent from these losses, though.
>
> However, while this tells me *where* the problem is, I still don't 
> know *what* the problem is. I've done some research, but couldn't find 
> anything particularly helpful.
> An interesting point may be that this problem is mono-directional. 
> That is, the bridge happily passes vlan-tagged frames from the 
> ethernet device to the vnet, but not the other way around. Untagged 
> ethernet frames make their way through the brigde, no matter where 
> they come from.
>
> The vlan module is loaded, as to the versioning questions:
> # cat /etc/centos-release ; uname -s -v -r
> CentOS Linux release 7.1.1503 (Core)
> Linux 3.10.0-229.7.2.el7.x86_64 #1 SMP Tue Jun 23 22:06:11 UTC 2015
>
> The guest OS is an up-to-date Debian Jessie, which should not matter, 
> though, as the frames get lost on the doorstep of the bridge on the host.
>
> Again, any suggestions are much appreciated!
>
> Regards,
> Felix
>
>
> Am 16.06.2015 um 08:27 schrieb Ido Barkan:
>> Hey Felix.
>>
>> IIUC your frames are dropped by the bridge. Ovirt uses Linux Bridges
>> To connect virtual machines to 'networks'. The guest connects to the 
>> bridge
>> using a tap device which usually is called 'vnet<number>'.
>>
>> So, just to verify, can you please tcpdump both on the bridge device 
>> and on the tap device?
>> The bridge can be quite noisy so I suggest filtering traffic using 
>> the guest's MAC
>> address. So I am not sure what protocol you use for tunneling but 
>> applying
>> a filter similar to this one should do the job:
>>           tcpdump -n -i vnet0 -vvv -s 1500 'udp[38:4]=0x001a4aaeec8e'
>>
>> My guess is that you will observe traffic on the tap device, but not 
>> on the bridge.
>> You didn't specify which centOS version you use but I do remember 
>> seeing people
>> complaining about Linux bridges discarding their tagged frames.
>> You can -maybe- also observe the 'dropped' counter increases on the 
>> bridge by running:
>>           'ip -s link show dev trunk'
>>
>> There were a few bugs on rhel6/7 about this, specifically I remember
>> https://bugzilla.redhat.com/show_bug.cgi?id=1174291
>> and
>> https://bugzilla.redhat.com/show_bug.cgi?id=1200275#c20
>>
>> Also, is the vlan module loaded on your host?
>> 'lsmod |grep 8021q'
>>
>> Thanks,
>> Ido
>>
>> ----- Original Message -----
>> From: "Felix Pepinghege" <pepinghege at ira.uka.de>
>> To: Users at ovirt.org
>> Sent: Monday, June 15, 2015 11:33:39 AM
>> Subject: [ovirt-users] vlan-tagging on non-tagged network
>>
>> Hi everybody!
>>
>> I am experiencing a behaviour of ovirt, of which I don't know whether it
>> is expected or not. My setup is as follows:
>> A virtual machine has a logical network attached to it, which is
>> configured without vlan-tagging and listens to the name 'trunk'.
>> The VM is running an openvpn server. It is a patched openvpn version,
>> including vlan-tagging. That is, openvpn clients get a vlan tag. This
>> should not really be an issue but should satisfy the "why do you want to
>> do it in the first place"-questions.
>> Anyhow, effectively, the VM simply puts vlan-tagged ethernet-frames on
>> the virtual network. These frames, however, never make it to the host's
>> network bridge, which represents the logical network.
>> My observations are: According to tcpdump, the vlan-tagged packages
>> arrive at the "eth1"-interface inside the VM (which *is* the correct
>> interface). Again, according to tcpdump, these packages never arrive at
>> the corresponding network-bridge (i.e., the interface 'trunk') on the 
>> host.
>> I know that the setup itself is feasible with KVM---I have it working on
>> a proxmox-machine. Therefore, my conclusion is, that ovirt doesn't like
>> vlan-tagged ethernet-frames on non-tagged logical networks, and somehow
>> filters them out, though I don't really see on what "level" that would
>> happen (Handling the ethernet frames should be a concern of
>> KVM/QEMU/Linux only, once ovirt has started the VM).
>> So this problem could be a CentOS issue, but I really don't see why
>> CentOS should act differently than debian does (proxmox is 
>> debian-based).
>> Is this a known/wanted/expected behaviour of ovirt, and can I somehow
>> prevent or elude it?
>>
>> Any help is much appreciated! Of course I am happy to provide more
>> information if that helps helping me :)
>>
>> Regards,
>> Felix
>> _______________________________________________
>> Users mailing list
>> Users at ovirt.org
>> http://lists.ovirt.org/mailman/listinfo/users
>>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users