[ovirt-users] oVirt 3.5.3 and Network Unified Persistence issues?

Michael Burman mburman at redhat.com
Tue Aug 25 16:45:54 UTC 2015


Hi Simon,

This issue will be fixed on 3.5.4 
see - https://bugzilla.redhat.com/show_bug.cgi?id=1203422

On 3.5.3, vdsm generating all ifcfg-* files to ONBOOT=NO by default, except the management network and the interface it is attached to. In your case bond (bond0,bond.108 and the slaves).
- You can configure your ifcfg-* files manually to ONBOOT=yes and restart network service as a workaround for now. 

Kind regards,
Michael B

----- Original Message -----
From: "Simon Barrett" <Simon.Barrett at tradingscreen.com>
To: users at ovirt.org
Sent: Monday, August 24, 2015 5:01:45 PM
Subject: [ovirt-users] oVirt 3.5.3 and Network Unified Persistence issues?



I’m running into a problem with my upgrades to oVirt 3.5.3 and wanted to check if the following is a known issue. 



I have multiple vlan tagged interfaces configured. The files are being generated as expected by vdsm. The vlan 108 interface below is used by the ovirtmgmt bridge. The uatdev_ben, bond0.192, dev_office, bond0.124 interface definitions all have ONBOOT=no. 



root at host> grep -i onboot ifcfg* | grep -v bak 

ifcfg-bond0:ONBOOT=yes 

ifcfg-bond0.108:ONBOOT=yes 

ifcfg-bond0.124:ONBOOT=no 

ifcfg-bond0.192:ONBOOT=no 

ifcfg-dev_office:ONBOOT=no 

ifcfg-eth0:ONBOOT=yes 

ifcfg-eth1:ONBOOT=yes 

ifcfg-eth2:ONBOOT=no 

ifcfg-eth3:ONBOOT=no 

ifcfg-lo:ONBOOT=yes 

ifcfg-ovirtmgmt:ONBOOT=yes 

ifcfg-uatdev_ben:ONBOOT=no 



The persistence configuration files are where they should be (I think): 



root at host> ls -l /var/lib/vdsm/persistence/netconf/nets/ 

total 12 

-rw-r--r-- 1 root root 121 Aug 24 22:44 dev_office 

-rw-r--r-- 1 root root 173 Aug 24 22:44 ovirtmgmt 

-rw-r--r-- 1 root root 121 Aug 24 22:44 uatdev_ben 



If I were to do a “service network restart” on the node, the uatdev_ben, dev_office, bond0.124 & bond0.192 are removed and then not restored as the “ONBOOT=no”. I assumed that vdsmd would re-create the dev_office and uatdev_ben interfaces so restarted vdsmd but they were not restored. I tried a “vdsm-tool restore-nets” to see if that would restore the interfaces but no joy. 



Am I missing something? Is there another method I should use to recover the missing interfaces? Should the ifcfg files all be configured with “ONBOOT=yes” just in case someone does run a “service network restart”? 



My oVirt nodes are CentOS 6.5, I’m not using the node iso. 



Many thanks in advance for any assistance. 



Regards, 



Simon Barrett 

_______________________________________________
Users mailing list
Users at ovirt.org
http://lists.ovirt.org/mailman/listinfo/users

-- 
Michael Burman
RedHat Israel, RHEV-M QE Network Team

Mobile: 054-5355725
IRC: mburman



More information about the Users mailing list