[ovirt-users] network configuration oVirt 3.5

Tue Dec 22 10:26:57 UTC 2015

This is part of the ovirtmgmt logical network configuration in oVirt Engine.
It looks something like this:

Ido

On Tue, Dec 22, 2015 at 11:59 AM, Kristof VAN DEN EYNDEN <
Kristof.VANDENEYNDEN at politiewestkust.be> wrote:

> Hey Ido,
>
> But I didn’t set anything to DHCP ? So where does that come from
>
>
>
>
>
>
>
> *Van:* Ido Barkan [mailto:ibarkan at redhat.com]
> *Verzonden:* dinsdag 22 december 2015 10:54
>
> *Aan:* Kristof VAN DEN EYNDEN
> *CC:* users at ovirt.org
> *Onderwerp:* Re: [ovirt-users] network configuration oVirt 3.5
>
>
>
> Configuring the management network with DHCP causes VDSM to try and
> configure
>
> the NIC that with a bridge on top of it with DHCP.
> This has failed and VDSM automatically reverted the NIC configuration to
> its original
> static IP configuration.
>
> The installation of VDSM went OK, but the configuration of the management
> network
>
> have failed because the assignment of a DHCP address failed.
>
> Ido
>
>
>
> On Tue, Dec 22, 2015 at 11:46 AM, Kristof VAN DEN EYNDEN <
> Kristof.VANDENEYNDEN at politiewestkust.be> wrote:
>
> Before installing the oVirt Node I set the ifcfg-enp3s0 to a static
> address (no dhcp server availaible on this network).
>
>
>
> After installing the Node through the oVirt interface I was still able to
> connect to the server using that address.
>
> After reboot the IP was still active. After connecting the ovirtmgmt to
> that interface I saw that is was set to DHCP (but the static IP was filled
> in the grayed out boxes)  so probably something has gone wrong during the
> install of the VDSM package?
>
>
>
>
>
> *Van:* Ido Barkan [mailto:ibarkan at redhat.com]
> *Verzonden:* dinsdag 22 december 2015 10:32
> *Aan:* Kristof VAN DEN EYNDEN
>
> *CC:* users at ovirt.org
> *Onderwerp:* Re: [ovirt-users] network configuration oVirt 3.5
>
>
>
> Hi Kristof.
>
> By inspecting the logs (supervdsm.log) I see the following:
> Adding the management network on the host started here:
>
> MainProcess|jsonrpc.Executor/4::DEBUG::2015-12-21
> 15:40:04,620::supervdsmServer::114::SuperVdsm.ServerCallback::(wrapper)
> call setupNetworks with ({u'ovirtmgmt': {u'nic': u'enp3s0', u'mtu':
> u'1500', u'bootproto': u'dhcp', u'STP': u'no', u'bridged': u'true',
> u'defaultRoute': True}}, {}, {u'connectivityCheck': u'true',
> u'connectivityTimeout': 120}) {}
>
> as part of the network configuration vdsm tries to call `ifup` on the
> bridge named ovirtmgmt:
>
> ifup-waiting-on-dhcp::DEBUG::2015-12-21
> 15:40:04,854::utils::669::root::(execCmd) /usr/bin/systemd-run --scope
> --unit=8bcdacee-4849-453d-a68f-2251e168d466 --slice=vdsm-dhclient
> /usr/sbin/ifup ovirtmgmt (cwd None)
>
> This fails after ~1 minute:
>
> ifup-waiting-on-dhcp::DEBUG::2015-12-21
> 15:41:08,184::utils::687::root::(execCmd) FAILED: <err> = 'Running as unit
> 8bcdacee-4849-453d-a68f-2251e168d466.scope.\n'; <rc> = 1
>
> and then the vdsm gives up after 2 minuets (see the parameter:
> u'connectivityTimeout': 120) when it no longer hears the keepalive ping
> from the engine.
>
> I guess that somehow the DHCP process on your network is not operating
> properly.
>
> To work around this (until you sort out the DHCP issues)- configure
> ovirtmgmt management to have a static IP.
>
> Ido
>
>
>
>
>
> On Mon, Dec 21, 2015 at 4:04 PM, Kristof VAN DEN EYNDEN <
> Kristof.VANDENEYNDEN at politiewestkust.be> wrote:
>
> Hey Dan,
>
> I reïnstalled the 3.6 on CentOS 7 (this was the issue as vdsm is no longre
> build for 6.7).
> It's a fresh install of CentOs, only configured the adapter for a static
> IP and then the install of the oVirt Node.
>  Installation goes well until following errors popup:
>
>
> Dec 21, 2015 3:42:45 PM
> Host KVM1 installation failed. Failed to configure management network on
> the host.
>
> Dec 21, 2015 3:42:45 PM
> Failed to configure management network on host KVM1 due to setup networks
> failure.
>
> Dec 21, 2015 3:42:45 PM
> VDSM KVM1 command failed: connectivity check failed
>
> I included both vdsm.log  & supervdsm.log
>
> ---
>
> I did a reboot, the ovirtmgmt was not linked to the adapter (enp3s0).
> Tried to link it manually which worked without hassle...
>
> So now everything seems OK. I'll test further with the 3.6 now and hope it
> all goes like this now
>
> -----Oorspronkelijk bericht-----
> Van: users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] Namens
> Kristof VAN DEN EYNDEN
> Verzonden: maandag 21 december 2015 11:41
> Aan: 'users at ovirt.org'
>
> Onderwerp: Re: [ovirt-users] network configuration oVirt 3.5
>
> Hey Dan,
>
> Thanks for your response.
>
> VDSM was the first problem when installing oVirt 3.6 on CentOS, it
> couldn't find the package and while browsing through the repos I couldn't
> find it either. So that was the first issue.. I tried compiling vdsm myself
> which didn't work either and I ended up using the VDSM package under the
> 3.5 release. Any idea how to tackle this?
>
> If I have the time I'll try to reinstall 3.6 and note all the issues I
> find on the way. Can't recover those files as the server is complete messed
> up after my previous efforts
>
> Kind regards !
> Kristof
>
>
>
>
> -----Oorspronkelijk bericht-----
> Van: Dan Kenigsberg [mailto:danken at redhat.com]
> Verzonden: maandag 21 december 2015 11:19
> Aan: Kristof VAN DEN EYNDEN; edwardh at redhat.com
> CC: 'users at ovirt.org'
> Onderwerp: Re: [ovirt-users] network configuration oVirt 3.5
>
> On Thu, Dec 17, 2015 at 03:33:28PM +0000, Kristof VAN DEN EYNDEN wrote:
> > Hello everyone,
> >
> > After trying to install oVirt 3.6 on CentOs which was a lot of pain, I
> ended up installing 3.5 without hassle.
>
> Would you provide more information (logs, screenshots) about the pains of
> installing ovirt-3.6? These days, most of the development effort is focused
> on stabilizing 3.6. No further releases of ovirt-3.5.z are expected (up to
> horrible security bugs, etc), so we advise using 3.6 in new instllations.
>
> >
> > BUT Now I'm trying to configure the network for my first cluster host
> but I'm having troubles doing so.
> >
> > The server has 4 network ports,
> > Eth0 = Virtual management network, 172.16 range, only used for oVirt /
> > KVM
> > Eth1 = Local network where the Guest should be accessible range 11.x
> > Eth2/3 unused..
> >
> > Initially, no network is assigned, but I feel eth0 should be linked to
> ovirtmgmt I automatically using it's IP that is assigned?
> >
> > When I assign ovirtmgmt to eth0 and set the IP to the corresponding IP
> > it already has for that host and the local network to eth1 the host
> > loses connection (until it resets it's connections...)
> > ->not assigning an IP is no option as I can only select static /dhcp
> > ->for ovirtmgmt
>
>
> ovirtmgmt should have been automatically added on top of the interface
> that has the IP used to add the host to Engine.
>
> Could you share your engine.log and {super,}vdsm.log from that time to
> understand why did it happen?
>
> Similarly, please share your ifcfg files prior to adding ovirtmgmt, and
> the supervdsm logs that end up with disconnection.
>
> Regards,
> Dan.
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
>
> --
>
> Thanks,
>
> Ido Barkan
>
>
>
>
> --
>
> Thanks,
>
> Ido Barkan
>

-- 
Thanks,
Ido Barkan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20151222/3570ac47/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: ovirtmgmt-dhcp.png
Type: image/png
Size: 33076 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20151222/3570ac47/attachment-0001.png>