[ovirt-users] Self hosted engine iusses
Nir Soffer
nsoffer at redhat.com
Thu Feb 5 11:08:16 UTC 2015
----- Original Message -----
> From: "Stefano Danzi" <s.danzi at hawai.it>
> To: "Nir Soffer" <nsoffer at redhat.com>
> Cc: users at ovirt.org
> Sent: Thursday, February 5, 2015 12:58:35 PM
> Subject: Re: [ovirt-users] Self hosted engine iusses
>
>
> Il 05/02/2015 11.52, Nir Soffer ha scritto:
> > ----- Original Message -----
> >
> > After ovirt installation on host console I see this error every 5 minutes:
> >
> > [ 1823.837020] device-mapper: table: 253:4: multipath: error getting device
> > [ 1823.837228] device-mapper: ioctl: error adding target to table
> > This may be caused by the fact that vdsm does not cleanup properly after
> > deactivating storage domains. We have an open bugs on this.
> >
> > You may have an active lv using non-existent multipath device.
> >
> > Can you share with us the output of:
> >
> > lsblk
> > multipath -ll
> > dmsetup table
> > cat /etc/multipath.conf
> > pvscan --cache > /dev/null && lvs
> >
> > Nir
> >
> See above:
>
> [root at ovirt01 etc]# lsblk
> NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
> sda 8:0 0 931,5G 0 disk
> ├─sda1 8:1 0 500M 0 part
> │ └─md0 9:0 0 500M 0 raid1 /boot
> └─sda2 8:2 0 931G 0 part
> └─md1 9:1 0 930,9G 0 raid1
> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
> /home/glusterfs/engine
> sdb 8:16 0 931,5G 0 disk
> ├─sdb1 8:17 0 500M 0 part
> │ └─md0 9:0 0 500M 0 raid1 /boot
> └─sdb2 8:18 0 931G 0 part
> └─md1 9:1 0 930,9G 0 raid1
> ├─centos_ovirt01-swap 253:0 0 7,9G 0 lvm [SWAP]
> ├─centos_ovirt01-root 253:1 0 50G 0 lvm /
> ├─centos_ovirt01-home 253:2 0 10G 0 lvm /home
> └─centos_ovirt01-glusterOVEngine 253:3 0 50G 0 lvm
> /home/glusterfs/engine
>
> [root at ovirt01 etc]# multipath -ll
> Feb 05 11:56:25 | multipath.conf +5, invalid keyword: getuid_callout
> Feb 05 11:56:25 | multipath.conf +18, invalid keyword: getuid_callout
> Feb 05 11:56:25 | multipath.conf +37, invalid keyword: getuid_callout
>
> [root at ovirt01 etc]# dmsetup table
> centos_ovirt01-home: 0 20971520 linear 9:1 121391104
> centos_ovirt01-swap: 0 16531456 linear 9:1 2048
> centos_ovirt01-root: 0 104857600 linear 9:1 16533504
> centos_ovirt01-glusterOVEngine: 0 104857600 linear 9:1 142362624
>
> [root at ovirt01 etc]# cat /etc/multipath.conf
> # RHEV REVISION 1.1
>
> defaults {
> polling_interval 5
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> no_path_retry fail
> user_friendly_names no
> flush_on_last_del yes
> fast_io_fail_tmo 5
> dev_loss_tmo 30
> max_fds 4096
> }
>
> devices {
> device {
> vendor "HITACHI"
> product "DF.*"
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> }
> device {
> vendor "COMPELNT"
> product "Compellent Vol"
> no_path_retry fail
> }
> device {
> # multipath.conf.default
> vendor "DGC"
> product ".*"
> product_blacklist "LUNZ"
> path_grouping_policy "group_by_prio"
> path_checker "emc_clariion"
> hardware_handler "1 emc"
> prio "emc"
> failback immediate
> rr_weight "uniform"
> # vdsm required configuration
> getuid_callout "/usr/lib/udev/scsi_id --whitelisted
> --replace-whitespace --device=/dev/%n"
> features "0"
> no_path_retry fail
> }
> }
>
> [root at ovirt01 etc]# pvscan --cache > /dev/null && lvs
> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
> Incorrect metadata area header checksum on /dev/sda2 at offset 4096
> LV VG Attr LSize Pool Origin Data% Move
> Log Cpy%Sync Convert
> glusterOVEngine centos_ovirt01 -wi-ao---- 50,00g
> home centos_ovirt01 -wi-ao---- 10,00g
> root centos_ovirt01 -wi-ao---- 50,00g
> swap centos_ovirt01 -wi-ao---- 7,88g
Are you sure this is the correct host that the multipath error came from?
There are no multipath devices in this host and no ovirt storage domains lvs.
Nir
More information about the Users
mailing list