[ovirt-users] Network setup for load balance

Martin Pavlík mpavlik at redhat.com
Thu Jan 29 07:13:06 EST 2015


Hi Carlos,

you figured it yourself, the fastest/easiest way will be to deploy ovirt again. This time set the bonding manually before deployment and tie the management to the bond you create.

You did not mention what bond mode you want to use, please note that not all bond modes are supported for VM networks. You’ve mentioned that you are after load balancing, in this case you can use  mode=2(balance-xor), or mode=4(802.3ad) however mode 4 requires switch side support/configuration.

HTH

Martin Pavlik

> On 28 Jan 2015, at 15:16, Carlos Ibrahim Arias <carlos at braimtec.com> wrote:
> 
> Hello,
> 
> I'm writing after a few weeks of trying to deploy the installation I had in mind without success. I'm a newbie using orvit and my problem may sound odd to some but I haven't been able to find a solution yet... I've searched all the Web.
> 
> I have a server with two NICs (em1 and em2) and I want to bond them for load balancing. I installed oVirt 3.5.1 using the hosted-engine option with CentOS 7 on the hosted-engine and the host, and gluster on the host for the domain storage. Everything was fine during the installation and the system seems to work properly. ovirtmgmt is linked to em1. 
> 
> The problem is that  now I can't bond em1 and em2 using the web GUI. I set up the bonding manually, it works but vdsmd is not starting afterwards.
> 
> Should I have done the bond before installing oVirt? Is there any workaround to bond my NICs so that oVirt can use them for load balance? Shall I use other network setup for load balance (VLANs..)?
> 
> Thanks in advanced,
> -- 
> Carlos Ibrahim Arias
> Consultor & Ingeniero en Informática
> Braimtec - Smart IT
> E: carlos at braimtec.com <mailto:carlos at braimtec.com>
> M: +34 600 457 497
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150129/c09bb29c/attachment-0001.html>


More information about the Users mailing list