[ovirt-users] HostedEngine Deployment Woes
Mikola Rose
mrose at power-soft.com
Fri Jan 2 22:27:18 UTC 2015
Hi Didi,
Thank you for the response.
I have tried to do a fresh install (RH 6.6) and still ran into the same problem.
[root at pws-hv15 rhiso]# hosted-engine --deploy
[ INFO ] Stage: Initializing
Continuing will configure this host for serving as hypervisor and create a VM where you have to install oVirt Engine afterwards.
Are you sure you want to continue? (Yes, No)[Yes]:
It has been detected that this program is executed through an SSH connection without using screen.
Continuing with the installation may lead to broken installation if the network connection fails.
It is highly recommended to abort the installation and run it inside a screen session using command "screen".
Do you want to continue anyway? (Yes, No)[No]: yes
[ INFO ] Generating a temporary VNC password.
[ INFO ] Stage: Environment setup
Configuration files: []
Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20150102134318-7ougjc.log
Version: otopi-1.2.3 (otopi-1.2.3-1.el6ev)
[ INFO ] Hardware supports virtualization
[ INFO ] Bridge rhevm already created
[ INFO ] Stage: Environment packages setup
[ INFO ] Stage: Programs detection
[ INFO ] Stage: Environment setup
[ INFO ] Stage: Environment customization
--== STORAGE CONFIGURATION ==--
During customization use CTRL-D to abort.
Please specify the storage you would like to use (nfs3, nfs4)[nfs3]:
Please specify the full shared storage connection path to use (example: host:/path): 192.168.1.32:/Volumes/Raid1
[ INFO ] Installing on first host
Please provide storage domain name. [hosted_storage]:
Local storage datacenter name is an internal name and currently will not be shown in engine's admin UI.Please enter local datacenter name [hosted_datacenter]:
--== SYSTEM CONFIGURATION ==--
--== NETWORK CONFIGURATION ==--
iptables was detected on your computer, do you wish setup to configure it? (Yes, No)[Yes]:
Please indicate a pingable gateway IP address [192.168.0.3]:
--== VM CONFIGURATION ==--
Please specify the device to boot the VM from (cdrom, disk, pxe) [cdrom]:
The following CPU types are supported by this host:
- model_Westmere: Intel Westmere Family
- model_Nehalem: Intel Nehalem Family
- model_Penryn: Intel Penryn Family
- model_Conroe: Intel Conroe Family
Please specify the CPU type to be used by the VM [model_Westmere]:
Please specify path to installation media you would like to use [None]: /mnt/rhiso
Please specify the number of virtual CPUs for the VM [Defaults to minimum requirement: 2]:
Please specify the disk size of the VM in GB [Defaults to minimum requirement: 25]:
You may specify a MAC address for the VM or accept a randomly generated default [00:16:3e:02:7f:c4]:
Please specify the memory size of the VM in MB [Defaults to minimum requirement: 4096]:
Please specify the console type you would like to use to connect to the VM (vnc, spice) [vnc]:
--== HOSTED ENGINE CONFIGURATION ==--
Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_1]:
Enter 'admin at internal' user password that will be used for accessing the Administrator Portal:
Confirm 'admin at internal' user password:
Please provide the FQDN for the engine you would like to use.
This needs to match the FQDN that you will use for the engine installation within the VM.
Note: This will be the FQDN of the VM you are now going to create,
it should not point to the base host or to any other existing machine.
Engine FQDN: powerhost1.power-soft.net<http://powerhost1.power-soft.net>
Please provide the name of the SMTP server through which we will send notifications [localhost]:
Please provide the TCP port number of the SMTP server [25]:
Please provide the email address from which notifications will be sent [root at localhost]:
Please provide a comma-separated list of email addresses which will get notifications [root at localhost]:
[ INFO ] Stage: Setup validation
--== CONFIGURATION PREVIEW ==--
Engine FQDN : powerhost1.power-soft.net<http://powerhost1.power-soft.net>
Bridge name : rhevm
SSH daemon port : 22
Firewall manager : iptables
Gateway address : 192.168.0.3
Host name for web application : hosted_engine_1
Host ID : 1
Image size GB : 25
Storage connection : 192.168.1.32:/Volumes/Raid1
Console type : vnc
Memory size MB : 4096
MAC address : 00:16:3e:02:7f:c4
Boot type : cdrom
Number of CPUs : 2
ISO image (for cdrom boot) : /mnt/rhiso
CPU Type : model_Westmere
Please confirm installation settings (Yes, No)[No]: Yes
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Configuring libvirt
[ INFO ] Configuring VDSM
[ INFO ] Starting vdsmd
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Creating Storage Domain
[ INFO ] Creating Storage Pool
[ INFO ] Connecting Storage Pool
[ INFO ] Verifying sanlock lockspace initialization
[ INFO ] Initializing sanlock lockspace
[ INFO ] Initializing sanlock metadata
[ INFO ] Creating VM Image
[ INFO ] Disconnecting Storage Pool
[ INFO ] Start monitoring domain
[ ERROR ] Failed to execute stage 'Misc configuration': The read operation timed out
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
sanlock status
daemon 4a21a439-cc72-4542-8146-71d0cb754da4.pws-hv15.p
p -1 helper
p -1 listener
p -1 status
p 5365
s e7175b6e-bf5a-4723-98f6-0f7972623f4c:1:/rhev/data-center/mnt/192.168.1.32\:_Volumes_Raid1/e7175b6e-bf5a-4723-98f6-0f7972623f4c/dom_md/ids:0
I am not sure if it is relevant but after subscribing to the relevant channels listed in the Installation Guid<https://access.redhat.com/documentation/en-US/Red_Hat_Enterprise_Virtualization/3.4/html/Installation_Guide/chap-The_Self-Hosted_Engine.html>e I was receiving an error when trying to update via Yum and only after I installed rhel-6-server-rhev-mgmt-agent-rpms. I have no idea why it would want to install the i686 augeas items and can not find any info on how to resolve this.
[root at pws-hv15 ~]# yum update
Loaded plugins: product-id, security, subscription-manager, versionlock
Setting up Update Process
Resolving Dependencies
--> Running transaction check
---> Package augeas-libs.x86_64 0:1.0.0-5.el6_5.1 will be updated
--> Processing Dependency: augeas-libs = 1.0.0-5.el6_5.1 for package: augeas-1.0.0-5.el6_5.1.x86_64
---> Package augeas-libs.x86_64 0:1.0.0-7.el6 will be an update
--> Running transaction check
---> Package augeas-libs.i686 0:1.0.0-5.el6_5.1 will be installed
--> Processing Dependency: libxml2.so.2(LIBXML2_2.4.30) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libxml2.so.2 for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libselinux.so.1 for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.8) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.4) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.3.4) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.3) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.2) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.1.3) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.1.1) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.1) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6(GLIBC_2.0) for package: augeas-libs-1.0.0-5.el6_5.1.i686
--> Processing Dependency: libc.so.6 for package: augeas-libs-1.0.0-5.el6_5.1.i686
---> Package augeas-libs.x86_64 0:1.0.0-5.el6_5.1 will be updated
---> Package augeas-libs.x86_64 0:1.0.0-5.el6_5.1 will be updated
--> Running transaction check
---> Package glibc.i686 0:2.12-1.149.el6 will be installed
--> Processing Dependency: libfreebl3.so(NSSRAWHASH_3.12.3) for package: glibc-2.12-1.149.el6.i686
--> Processing Dependency: libfreebl3.so for package: glibc-2.12-1.149.el6.i686
---> Package libselinux.i686 0:2.0.94-5.8.el6 will be installed
---> Package libxml2.i686 0:2.7.6-17.el6_6.1 will be installed
--> Processing Dependency: libz.so.1 for package: libxml2-2.7.6-17.el6_6.1.i686
--> Running transaction check
---> Package nss-softokn-freebl.i686 0:3.14.3-18.el6_6 will be installed
---> Package zlib.i686 0:1.2.3-29.el6 will be installed
--> Finished Dependency Resolution
Error: Multilib version problems found. This often means that the root
cause is something else and multilib version checking is just
pointing out that there is a problem. Eg.:
1. You have an upgrade for augeas-libs which is missing some
dependency that another package requires. Yum is trying to
solve this by installing an older version of augeas-libs of the
different architecture. If you exclude the bad architecture
yum will tell you what the root cause is (which package
requires what). You can try redoing the upgrade with
--exclude augeas-libs.otherarch ... this should give you an error
message showing the root cause of the problem.
2. You have multiple architectures of augeas-libs installed, but
yum can only see an upgrade for one of those arcitectures.
If you don't want/need both architectures anymore then you
can remove the one with the missing update and everything
will work.
3. You have duplicate versions of augeas-libs installed already.
You can use "yum check" to get yum show these errors.
...you can also use --setopt=protected_multilib=false to remove
this checking, however this is almost never the correct thing to
do as something else is very likely to go wrong (often causing
much more problems).
Protected multilib versions: augeas-libs-1.0.0-5.el6_5.1.i686 != augeas-libs-1.0.0-7.el6.x86_64
On Dec 31, 2014, at 1:28 AM, Yedidyah Bar David <didi at redhat.com<mailto:didi at redhat.com>> wrote:
----- Original Message -----
From: "Mikola Rose" <mrose at power-soft.com<mailto:mrose at power-soft.com>>
To: users at ovirt.org<mailto:users at ovirt.org>
Sent: Tuesday, December 30, 2014 2:12:52 AM
Subject: [ovirt-users] HostedEngine Deployment Woes
Hi List Members;
I have been struggling with deploying oVirt hosted engine I keep running into
a timeout during the "Misc Configuration" any suggestion on how I can
trouble shoot this?
Redhat 2.6.32-504.3.3.el6.x86_64
Installed Packages
ovirt-host-deploy.noarch 1.2.5-1.el6ev @rhel-6-server-rhevm-3.4-rpms
ovirt-host-deploy-java.noarch 1.2.5-1.el6ev @rhel-6-server-rhevm-3.4-rpms
ovirt-hosted-engine-ha.noarch 1.1.6-3.el6ev @rhel-6-server-rhevm-3.4-rpms
ovirt-hosted-engine-setup.noarch 1.1.5-1.el6ev @rhel-6-server-rhevm-3.4-rpms
rhevm-setup-plugin-ovirt-engine.noarch 3.4.4-2.2.el6ev
@rhel-6-server-rhevm-3.4-rpms
rhevm-setup-plugin-ovirt-engine-common.noarch 3.4.4-2.2.el6ev
@rhel-6-server-rhevm-3.4-rpms
So this is RHEV (3.4) or ovirt?
Please confirm installation settings (Yes, No)[No]: Yes
[ INFO ] Stage: Transaction setup
[ INFO ] Stage: Misc configuration
[ INFO ] Stage: Package installation
[ INFO ] Stage: Misc configuration
[ INFO ] Configuring libvirt
[ INFO ] Configuring VDSM
[ INFO ] Starting vdsmd
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Waiting for VDSM hardware info
[ INFO ] Connecting Storage Domain
[ INFO ] Connecting Storage Pool
[ INFO ] Verifying sanlock lockspace initialization
[ INFO ] sanlock lockspace already initialized
[ INFO ] sanlock metadata already initialized
[ INFO ] Creating VM Image
[ INFO ] Disconnecting Storage Pool
[ INFO ] Start monitoring domain
[ ERROR ] Failed to execute stage 'Misc configuration': The read operation
timed out
[ INFO ] Stage: Clean up
[ INFO ] Generating answer file '/etc/ovirt-hosted-engine/answers.conf'
[ INFO ] Stage: Pre-termination
[ INFO ] Stage: Termination
2014-12-29 14:53:41 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.sanlock.lockspace
lockspace._misc:133 Ensuring lease for lockspace hosted-engine, host id 1 is
acquired (file:
/rhev/data-center/mnt/192.168.0.75:_Volumes_Raid1/8094d528-7aa2-4c28-839f-73d7c8bcfebb/ha_agent/hosted-engine.lockspace)
2014-12-29 14:53:41 INFO
otopi.plugins.ovirt_hosted_engine_setup.sanlock.lockspace
lockspace._misc:144 sanlock lockspace already initialized
2014-12-29 14:53:41 INFO
otopi.plugins.ovirt_hosted_engine_setup.sanlock.lockspace
lockspace._misc:157 sanlock metadata already initialized
2014-12-29 14:53:41 DEBUG otopi.context context._executeMethod:138 Stage misc
METHOD otopi.plugins.ovirt_hosted_engine_setup.vm.image.Plugin._misc
2014-12-29 14:53:41 INFO otopi.plugins.ovirt_hosted_engine_setup.vm.image
image._misc:162 Creating VM Image
2014-12-29 14:53:41 DEBUG otopi.plugins.ovirt_hosted_engine_setup.vm.image
image._misc:163 createVolume
2014-12-29 14:53:42 DEBUG otopi.plugins.ovirt_hosted_engine_setup.vm.image
image._misc:184 Created volume d8e7eed4-c763-4b3d-8a71-35f2d692a73d, request
was:
- image: 9043e535-ea94-41f8-98df-6fdbfeb107c3
- volume: e6a9291d-ac21-4a95-b43c-0d6e552baaa2
2014-12-29 14:53:42 DEBUG otopi.ovirt_hosted_engine_setup.tasks tasks.wait:48
Waiting for existing tasks to complete
2014-12-29 14:53:43 DEBUG otopi.ovirt_hosted_engine_setup.tasks tasks.wait:48
Waiting for existing tasks to complete
2014-12-29 14:53:43 DEBUG otopi.context context._executeMethod:138 Stage misc
METHOD otopi.plugins.ovirt_hosted_engine_setup.vm.boot_disk.Plugin._misc
2014-12-29 14:53:43 DEBUG otopi.context context._executeMethod:144 condition
False
2014-12-29 14:53:43 DEBUG otopi.context context._executeMethod:138 Stage misc
METHOD
otopi.plugins.ovirt_hosted_engine_setup.storage.storage.Plugin._disconnect_pool
2014-12-29 14:53:43 INFO
otopi.plugins.ovirt_hosted_engine_setup.storage.storage
storage._disconnect_pool:971 Disconnecting Storage Pool
2014-12-29 14:53:43 DEBUG otopi.ovirt_hosted_engine_setup.tasks tasks.wait:48
Waiting for existing tasks to complete
2014-12-29 14:53:43 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._spmStop:602
spmStop
2014-12-29 14:53:43 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.storage storage._spmStop:611
2014-12-29 14:53:43 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.storage
storage._storagePoolConnection:573 disconnectStoragePool
2014-12-29 14:53:45 INFO
otopi.plugins.ovirt_hosted_engine_setup.storage.storage
storage._disconnect_pool:975 Start monitoring domain
2014-12-29 14:53:45 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.storage
storage._startMonitoringDomain:529 _startMonitoringDomain
2014-12-29 14:53:46 DEBUG
otopi.plugins.ovirt_hosted_engine_setup.storage.storage
storage._startMonitoringDomain:534 {'status': {'message': 'OK', 'code': 0}}
2014-12-29 14:53:51 DEBUG otopi.ovirt_hosted_engine_setup.tasks
tasks.wait:127 Waiting for domain monitor
2014-12-29 14:54:51 DEBUG otopi.context context._executeMethod:152 method
exception
Traceback (most recent call last):
File "/usr/lib/python2.6/site-packages/otopi/context.py", line 142, in
_executeMethod
method['method']()
File
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py",
line 976, in _disconnect_pool
self._startMonitoringDomain()
File
"/usr/share/ovirt-hosted-engine-setup/scripts/../plugins/ovirt-hosted-engine-setup/storage/storage.py",
line 539, in _startMonitoringDomain
waiter.wait(self.environment[ohostedcons.StorageEnv.SD_UUID])
File "/usr/lib/python2.6/site-packages/ovirt_hosted_engine_setup/tasks.py",
line 128, in wait
response = serv.s.getVdsStats()
File "/usr/lib64/python2.6/xmlrpclib.py", line 1199, in __call__
return self.__send(self.__name, args)
File "/usr/lib64/python2.6/xmlrpclib.py", line 1489, in __request
verbose=self.__verbose
File "/usr/lib64/python2.6/xmlrpclib.py", line 1237, in request
errcode, errmsg, headers = h.getreply()
File "/usr/lib64/python2.6/httplib.py", line 1064, in getreply
response = self._conn.getresponse()
File "/usr/lib64/python2.6/httplib.py", line 990, in getresponse
response.begin()
File "/usr/lib64/python2.6/httplib.py", line 391, in begin
version, status, reason = self._read_status()
File "/usr/lib64/python2.6/httplib.py", line 349, in _read_status
line = self.fp.readline()
File "/usr/lib64/python2.6/socket.py", line 433, in readline
data = recv(1)
File "/usr/lib64/python2.6/ssl.py", line 215, in recv
return self.read(buflen)
File "/usr/lib64/python2.6/ssl.py", line 136, in read
return self._sslobj.read(len)
SSLError: The read operation timed out
We had several similar cases in the past [1] [2] but never managed
to reproduce on clean systems. Might it be some "dirt"? E.g. repeated
attempts using same storage, or storage used for something else,
some other host accessing it, host left unclean after previous
attempts to deploy (failed or successful), something like that?
If you reproduce on completely clean systems, both host(s) and storage,
please post more relevant logs, including:
>From host(s):
/var/log/vdsm/*
/var/log/ovirt-hosted-engine-setup/*
/var/log/ovirt-hosted-engine-ha/*
output of 'sanlock status'
output of 'rpm -qa'
>From engine vm:
/var/log/ovirt-engine/*
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1152564
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1099874
Thanks,
--
Didi
Mik Rose | Manager, IT - Support Services | PowerSoft Development Corp
1 (250) 642-0295 x23 http://www.power-soft.com<http://www.power-soft.com/> Live Support<https://secure.logmeinrescue.com/Customer/Download.aspx?EntryID=15095831>
This e-mail may be privileged and/or confidential, and the sender does not waive
any related rights and obligations. Any distribution, use or copying of this e-mail or the information
it contains by other than an intended recipient is unauthorized.
If you received this e-mail in error, please advise me (by return e-mail or otherwise) immediately.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150102/1816907a/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: log.zip
Type: application/zip
Size: 173878 bytes
Desc: log.zip
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150102/1816907a/attachment-0001.zip>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: rpmqa.txt
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150102/1816907a/attachment-0001.txt>
More information about the Users
mailing list