[ovirt-users] Issues with vm start up
VONDRA Alain
AVONDRA at unicef.fr
Thu Jan 8 15:48:41 UTC 2015
Hi,
Thanks A LOT Koen, you saved me with your solution !!!!
Regards
________________________________
Alain VONDRA
Chargé d'exploitation des Systèmes d'Information
Direction Administrative et Financière
+33 1 44 39 77 76
UNICEF France
3 rue Duguay Trouin 75006 PARIS
www.unicef.fr<http://www.unicef.fr/>
<http://www.unicef.fr>
[cid:urgence_eboladc6d2e]<http://www.unicef.fr/>
________________________________
[cid:siganture_bonne-annee_taille1707bdcfa]<http://www.unicef.fr>
De : users-bounces at ovirt.org [mailto:users-bounces at ovirt.org] De la part de Koen Vanoppen
Envoyé : lundi 8 décembre 2014 07:49
À : users at ovirt.org
Objet : Re: [ovirt-users] Issues with vm start up
We also had a issue when starting our vms. This was due the fact of the NUMA option under the host section. I attached a procedure I created for work. Maybe it is also useful for your case...
2014-12-02 5:58 GMT+01:00 Shanil S <xielesshanil at gmail.com<mailto:xielesshanil at gmail.com>>:
Hi Omer,
We have opened this as a bug, you can view the new bug here https://bugzilla.redhat.com/show_bug.cgi?id=1169625.
--
Regards
Shanil
On Tue, Dec 2, 2014 at 8:42 AM, Shanil S <xielesshanil at gmail.com<mailto:xielesshanil at gmail.com>> wrote:
Hi Omer,
Thanks for your reply. We will open it as a bug.
--
Regards
Shanil
On Mon, Dec 1, 2014 at 4:38 PM, Omer Frenkel <ofrenkel at redhat.com<mailto:ofrenkel at redhat.com>> wrote:
----- Original Message -----
> From: "Shanil S" <xielesshanil at gmail.com<mailto:xielesshanil at gmail.com>>
> To: "Omer Frenkel" <ofrenkel at redhat.com<mailto:ofrenkel at redhat.com>>, users at ovirt.org<mailto:users at ovirt.org>, "Juan Hernandez" <jhernand at redhat.com<mailto:jhernand at redhat.com>>
> Sent: Monday, December 1, 2014 12:39:12 PM
> Subject: Re: [ovirt-users] Issues with vm start up
>
> Hi Omer,
>
> Thanks for your reply.
>
> We are deploying those VM's through templates and all the templates has
> first boot from hard disk and second with cdrom. We are using cdrom in
> cloud-init section to insert the cloud-init data .Why we need this boot
> loader (VM boot order or in the cloud-init section) as in the template the
> first boot order is harddisk ?
>
>
if the template's boot order has hard-disk it should be ok,
not sure why it seems for this vm the boot order is only cd.
does this happen to any vm created from this template?
can you check the boot order is corrent in the edit vm dialog?
if the boot order is ok in the template,
and it happens to any new vm from this template,
you should open a bug so we could investigate this.
>
> --
> Regards
> Shanil
>
> On Mon, Dec 1, 2014 at 3:37 PM, Omer Frenkel <ofrenkel at redhat.com<mailto:ofrenkel at redhat.com>> wrote:
>
> >
> >
> > ----- Original Message -----
> > > From: "Shanil S" <xielesshanil at gmail.com<mailto:xielesshanil at gmail.com>>
> > > To: "Shahar Havivi" <shaharh at redhat.com<mailto:shaharh at redhat.com>>
> > > Cc: users at ovirt.org<mailto:users at ovirt.org>, "Juan Hernandez" <jhernand at redhat.com<mailto:jhernand at redhat.com>>, "Omer
> > Frenkel" <ofrenkel at redhat.com<mailto:ofrenkel at redhat.com>>
> > > Sent: Thursday, November 27, 2014 10:32:54 AM
> > > Subject: Re: [ovirt-users] Issues with vm start up
> > >
> > > Hi Omer,
> > >
> > > I have attached the engine.log and vdsm.log. Please check it. The vm id
> > is
> > > - 7c7aa9dedb57248f5da291117164f0d7
> > >
> >
> > sorry Shanil for the delay,
> > it looks that in the vm settings, you have chosen to boot only from cd ?
> > this is why the vm doest boot, the cloud-init disk is a settings disk, not
> > a boot disk
> > please go to update vm, change the boot order to use hard-disk, and boot
> > the vm.
> >
> > let me know if it helps,
> > Omer.
> >
> > > --
> > > Regards
> > > Shanil
> > >
> > > On Thu, Nov 27, 2014 at 1:46 PM, Shahar Havivi <shaharh at redhat.com<mailto:shaharh at redhat.com>>
> > wrote:
> > >
> > > > Try to remove content and run the vm,
> > > > ie remove the runcmd: or some of it - try to use the xml with out CDATA
> > > > maybe
> > > > you can pinpoint the problem that way...
> > > >
> > > >
> > > > On 27.11.14 10:03, Shanil S wrote:
> > > > > Hi All,
> > > > >
> > > > >
> > > > > I am using the ovirt version 3.5 and having some issues with the vm
> > > > startup
> > > > > with cloud-init using api in run-once mode.....
> > > > >
> > > > > Below is the steps i follow :-
> > > > >
> > > > > 1. Create the VM by API from precreated Template..
> > > > > 2. Start the VM in run-once mode and push the cloud-init data from
> > API..
> > > > > 3. VM stuck and from console it display the following :-
> > > > > Booting from DVD/CD.. ...
> > > > > Boot failed : could not read from CDROM (code 004)
> > > > >
> > > > > I am using the following xml for this operation :-
> > > > >
> > > > > <action>
> > > > > <vm>
> > > > > <os>
> > > > > <boot dev='cdrom'/>
> > > > > </os>
> > > > > <initialization>
> > > > > <cloud_init>
> > > > > <host>
> > > > > <address>test</address>
> > > > > </host>
> > > > > <network_configuration>
> > > > > <nics>
> > > > > <nic>
> > > > > <interface>virtIO</interface>
> > > > > <name>eth0</name>
> > > > > <boot_protocol>static</boot_protocol>
> > > > > <mac address=''/>
> > > > > <network>
> > > > > <ip address='' netmask='' gateway=''/>
> > > > > </network>
> > > > > <on_boot>true</on_boot><vnic_profile id='' />
> > > > > </nic>
> > > > > <nic>
> > > > > <interface>virtIO</interface>
> > > > > <name>eth1</name>
> > > > > <boot_protocol>static</boot_protocol>
> > > > > <mac address=''/>
> > > > > <network>
> > > > > <ip address='' netmask='255.255.255.0' gateway=''/>
> > > > > </network>
> > > > > <on_boot>true</on_boot><vnic_profile id='' />
> > > > > </nic>
> > > > > </nics>
> > > > > </network_configuration>
> > > > > <files>
> > > > > <file>
> > > > > <name>/ignored</name><content><![CDATA[#cloud-config
> > > > > disable-ec2-metadata: true
> > > > > disable_root: false
> > > > > ssh_pwauth: true
> > > > > ssh_deletekeys: true
> > > > > chpasswd: { expire: False }
> > > > >
> > > > > users:
> > > > > - name: root
> > > > > primary-group: root
> > > > > passwd: 8W7RQ5Bh
> > > > > lock-passwd: false
> > > > >
> > > > > runcmd:
> > > > > - sed -i '/nameserver/d' /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
> > > > > - echo 'root:8W7RQ5Bh' | chpasswd
> > > > > - yum -y update
> > > > > - yum -y install rdate
> > > > > - rdate -s stdtime.gov.hk<http://stdtime.gov.hk>]]></content>
> > > > > <type>plaintext</type>
> > > > > </file>
> > > > > </files>
> > > > > </cloud_init><custom_script><![CDATA[#cloud-config
> > > > > disable-ec2-metadata: true
> > > > > disable_root: false
> > > > > ssh_pwauth: true
> > > > > ssh_deletekeys: true
> > > > > chpasswd: { expire: False }
> > > > >
> > > > > users:
> > > > > - name: root
> > > > > primary-group: root
> > > > > passwd: 8W7RQ5Bh
> > > > > lock-passwd: false
> > > > >
> > > > > runcmd:
> > > > > - sed -i '/nameserver/d' /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.8.8' >> /etc/resolv.conf
> > > > > - echo 'nameserver 8.8.4.4' >> /etc/resolv.conf
> > > > > - echo 'root:8W7RQ5Bh' | chpasswd
> > > > > - yum -y update
> > > > > - yum -y install rdate
> > > > > - rdate -s stdtime.gov.hk<http://stdtime.gov.hk>]]></custom_script>
> > > > > </initialization>
> > > > > </vm>
> > > > > </action>
> > > > >
> > > > > I am also attaching the screen shot to this.
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Regards
> > > > > Shanil
> > > >
> > > >
> > > > > _______________________________________________
> > > > > Users mailing list
> > > > > Users at ovirt.org<mailto:Users at ovirt.org>
> > > > > http://lists.ovirt.org/mailman/listinfo/users
> > > >
> > > >
> > >
> >
>
_______________________________________________
Users mailing list
Users at ovirt.org<mailto:Users at ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150108/a80153d5/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: urgence_eboladc6d2e
Type: image/gif
Size: 3264 bytes
Desc: urgence_eboladc6d2e
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150108/a80153d5/attachment-0001.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: siganture_bonne-annee_taille1707bdcfa
Type: image/jpeg
Size: 36754 bytes
Desc: siganture_bonne-annee_taille1707bdcfa
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150108/a80153d5/attachment-0001.jpe>
More information about the Users
mailing list