[ovirt-users] Can´t use a VM Network VLAN, because the Virtual Machines inside can't reach the Gateway

Julián Tete danteconrad14 at gmail.com
Fri Jul 10 16:26:11 UTC 2015


Perhaps us are affected by the following error :

http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04267968

I will keep you informed

Thanks Friends

2015-07-06 12:06 GMT-05:00 Julián Tete <danteconrad14 at gmail.com>:

> Hi Friends of oVirt
>
> This the data required:
>
> I have a HP Enclosure with a HP SAN.
> I can't change the net settings in the switch because we have VMware
> Virtual Machines in production in the same enclosure.
> The switch is in Trunk Mode and all the traffic are in Tagged VLAN's with
> ID's: 1,50,90,91 and 100.
> I can play with 6 blades.
> I in the first Blade I installed oVirt in hosted engine mode.
> The only S.O is CentOS 7.1
>
> I used inxi to brig the data for you:
>
> My First Host is the only host until now (SPM) is the first data domain
> (NFS) and contains the hosted engine machine.
> I installed oVirt with ovirtmgmt in VLAN 1, over the interface eno1,
> without any VLAN Tagged configuration.
>
> This the data for my first host:
>
> http://pastebin.com/dfC0XTQM
>
> This the data for the Engine:
>
> http://pastebin.com/JdrMSbj0
>
> This the data for the Virtual Machine created in VLAN 50:
>
> S.O : CentOS 7.1
> SELinux: Permissive
> IP ADDRESS: 192.168.50.8
> PREFIX: 27
> GATEWAY: 192.168.50.1
> Interface: eth0
>
> The Virtual Machine hasn´t any VLAN configuration.
>
> In the 3 S.O, Network Manager is stopped and disabled, connectivity is
> managed by the network daemon.
>
> This is the data for the Networking in the admin interface:
>
> http://postimg.org/image/lbypejxrh/
>
> http://postimg.org/image/jtkyhqs8f/
>
> http://postimg.org/image/7dwf1nb9f/
>
> http://postimg.org/image/6i9t75g33/
>
> http://postimg.org/image/sm8e6lecv/
>
> http://postimg.org/image/cvig7rjuv/
>
> http://postimg.org/image/fxcthsrtl/
>
> http://postimg.org/image/o6xjwwvyz/
>
> http://postimg.org/image/pv5ar5v3j/
>
> http://postimg.org/image/dx8br0gq7/
>
> http://postimg.org/image/baixp4b0j/
>
> This the case
>
> With No IP in the VLAN, and IP in the Virtual Machine, From the Virtual
> Machine can ping myself (192.168.50.8) but I can't reach the gateway, can't
> reach the host, can't reach Internet.
>
> Any help is appreciated
>
> Thanks Friends of oVirt
>
>
>
>
>
>
>
>
> 2015-07-06 7:51 GMT-05:00 Soeren Malchow <soeren.malchow at mcon.net>:
>
>> Hi,
>>
>> To make it easier to understand what the situation is, it would help to
>> see your bridging configuration and your interface configration.
>>
>> Something like:
>>
>> #> ip addr
>>
>> And
>>
>> #> brctl show
>>
>> Regards
>> Soeren
>>
>> On 06/07/15 13:30, "users-bounces at ovirt.org on behalf of Dan Kenigsberg"
>> <users-bounces at ovirt.org on behalf of danken at redhat.com> wrote:
>>
>> >On Tue, Jun 30, 2015 at 03:48:49PM -0500, Julián Tete wrote:
>> >> Hi Friends of oVirt
>> >>
>> >> I'm trying to migrate my company from VMware to oVirt.
>> >
>> >We'd like to help you do this!
>> >
>> >> In my final tests, I set up 2 more VLANs in oVirt, (VM VLANs)
>> >> The Virtual Machines in these VLANs, can be reached from the external
>> >>IPs
>> >> from the net range,
>> >> but from the Virtual machines only can ping the Host with the Bridge
>> and
>> >> itself, can't reach the gateway. ¿?
>> >>
>> >> I configured a IP Forwarding in the Host with the virtual machine, and
>> >> nothing changes...
>> >>
>> >> Any idea ? This is the last duty before embrace oVirt in the company.
>> >>
>> >> Look to the VLAN 100 configuration (My desired VM Network):
>> >>
>> >> http://postimg.org/image/7hrog0a2n/
>> >>
>> >> http://postimg.org/image/68b40i1vr/
>> >>
>> >> http://postimg.org/image/lu6mlshgp/
>> >
>> >I must admit that I don't understand your problem yet. When you ping
>> >from inside your guest, where are your packets dropped?
>> >
>> >I'd like to point that your "Hosting" network, as most VM networks, is
>> >better off left without an IP address. The benefit of this is better
>> >security (host TCP stack is not accessible from VMs) and less chances of
>> >routing collisions from the host.
>> >
>> >So unless you need to use the same network for something other than VM
>> >communication, try to clear its address.
>> >
>> >Regards,
>> >Dan.
>> >_______________________________________________
>> >Users mailing list
>> >Users at ovirt.org
>> >http://lists.ovirt.org/mailman/listinfo/users
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150710/e2ce682a/attachment-0001.html>


More information about the Users mailing list