[ovirt-users] This VM is not managed by the engine
Mark Steele
msteele at telvue.com
Sun Jul 12 19:16:56 UTC 2015
No joy - the shutdown appears to start - but eventually the VM shows as
running again. There is NO process running that shows up with ps command.
I'm not sure what to do next
***
*Mark Steele*
CIO / VP Technical Operations | TelVue Corporation
TelVue - We Share Your Vision
800.885.8886 x128 | msteele at telvue.com | http://www.telvue.com
twitter: http://twitter.com/telvue | facebook:
https://www.facebook.com/telvue
On Sun, Jul 12, 2015 at 10:13 AM, Artyom Lukianov <alukiano at redhat.com>
wrote:
> Also provide to us vdsm log from host(/var/log/vdsm/vdsm.log) for future
> investigation.
> Thanks
>
> ----- Original Message -----
> From: "Mark Steele" <msteele at telvue.com>
> To: "Roy Golan" <rgolan at redhat.com>
> Cc: "Artyom Lukianov" <alukiano at redhat.com>, users at ovirt.org
> Sent: Sunday, July 12, 2015 4:21:34 PM
> Subject: Re: [ovirt-users] This VM is not managed by the engine
>
> [root at hv-02 etc]# vdsClient -s 0 destroy
> 41703d5c-6cdb-42b4-93df-d78be2776e2b
>
> Unexpected exception
>
> Not sure I'm getting any closer :-)
>
>
>
>
> ***
> *Mark Steele*
> CIO / VP Technical Operations | TelVue Corporation
> TelVue - We Share Your Vision
> 800.885.8886 x128 | msteele at telvue.com | http://www.telvue.com
> twitter: http://twitter.com/telvue | facebook:
> https://www.facebook.com/telvue
>
> On Sun, Jul 12, 2015 at 9:13 AM, Mark Steele <msteele at telvue.com> wrote:
>
> > OK - I think I'm getting closer - now that I'm on the correct box.
> >
> > here is the output of the vdsClient command - which is the device id -
> the
> > first line?
> >
> > [root at hv-02 etc]# vdsClient -s 0 list
> >
> > 41703d5c-6cdb-42b4-93df-d78be2776e2b
> > Status = Up
> > acpiEnable = true
> > emulatedMachine = rhel6.5.0
> > afterMigrationStatus =
> > pid = 27304
> > memGuaranteedSize = 2048
> > transparentHugePages = true
> > displaySecurePort = 5902
> > spiceSslCipherSuite = DEFAULT
> > cpuType = SandyBridge
> > smp = 2
> > numaTune = {'nodeset': '0,1', 'mode': 'interleave'}
> > custom =
> >
> {'device_86f1aa5a-aa3f-4e47-b546-aafcc86fcbb6device_ebd4c73d-12c4-435e-8cc5-f180d8f20a72':
> > 'VmDevice {vmId=41703d5c-6cdb-42b4-93df-d78be2776e2b,
> > deviceId=ebd4c73d-12c4-435e-8cc5-f180d8f20a72, device=unix, type=CHANNEL,
> > bootOrder=0, specParams={}, address={bus=0, controller=0,
> > type=virtio-serial, port=2}, managed=false, plugged=true, readOnly=false,
> > deviceAlias=channel1, customProperties={}, snapshotId=null}',
> >
> 'device_86f1aa5a-aa3f-4e47-b546-aafcc86fcbb6device_ebd4c73d-12c4-435e-8cc5-f180d8f20a72device_ffd2796f-7644-4008-b920-5f0970b0ef0e':
> > 'VmDevice {vmId=41703d5c-6cdb-42b4-93df-d78be2776e2b,
> > deviceId=ffd2796f-7644-4008-b920-5f0970b0ef0e, device=unix, type=CHANNEL,
> > bootOrder=0, specParams={}, address={bus=0, controller=0,
> > type=virtio-serial, port=1}, managed=false, plugged=true, readOnly=false,
> > deviceAlias=channel0, customProperties={}, snapshotId=null}',
> > 'device_86f1aa5a-aa3f-4e47-b546-aafcc86fcbb6': 'VmDevice
> > {vmId=41703d5c-6cdb-42b4-93df-d78be2776e2b,
> > deviceId=86f1aa5a-aa3f-4e47-b546-aafcc86fcbb6, device=ide,
> type=CONTROLLER,
> > bootOrder=0, specParams={}, address={slot=0x01, bus=0x00, domain=0x0000,
> > type=pci, function=0x1}, managed=false, plugged=true, readOnly=false,
> > deviceAlias=ide0, customProperties={}, snapshotId=null}',
> >
> 'device_86f1aa5a-aa3f-4e47-b546-aafcc86fcbb6device_ebd4c73d-12c4-435e-8cc5-f180d8f20a72device_ffd2796f-7644-4008-b920-5f0970b0ef0edevice_6693d023-9c1f-433c-870e-e9771be8474b':
> > 'VmDevice {vmId=41703d5c-6cdb-42b4-93df-d78be2776e2b,
> > deviceId=6693d023-9c1f-433c-870e-e9771be8474b, device=spicevmc,
> > type=CHANNEL, bootOrder=0, specParams={}, address={bus=0, controller=0,
> > type=virtio-serial, port=3}, managed=false, plugged=true, readOnly=false,
> > deviceAlias=channel2, customProperties={}, snapshotId=null}'}
> > vmType = kvm
> > memSize = 2048
> > smpCoresPerSocket = 1
> > vmName = connect-turbo-stage-03
> > nice = 0
> > bootMenuEnable = false
> > copyPasteEnable = true
> > displayIp = 10.1.90.161
> > displayPort = -1
> > smartcardEnable = false
> > clientIp =
> > fileTransferEnable = true
> > nicModel = rtl8139,pv
> > keyboardLayout = en-us
> > kvmEnable = true
> > pitReinjection = false
> > displayNetwork = ovirtmgmt
> > devices = [{'target': 2097152, 'specParams': {'model': 'none'}, 'alias':
> > 'balloon0', 'deviceType': 'balloon', 'device': 'memballoon', 'type':
> > 'balloon'}, {'device': 'unix', 'alias': 'channel0', 'address': {'bus':
> '0',
> > 'controller': '0', 'type': 'virtio-serial', 'port': '1'}, 'deviceType':
> > 'channel', 'type': 'channel'}, {'device': 'unix', 'alias': 'channel1',
> > 'address': {'bus': '0', 'controller': '0', 'type': 'virtio-serial',
> 'port':
> > '2'}, 'deviceType': 'channel', 'type': 'channel'}, {'device': 'spicevmc',
> > 'alias': 'channel2', 'address': {'bus': '0', 'controller': '0', 'type':
> > 'virtio-serial', 'port': '3'}, 'deviceType': 'channel', 'type':
> 'channel'},
> > {'index': '0', 'alias': 'scsi0', 'specParams': {}, 'deviceType':
> > 'controller', 'deviceId': '88db8cb9-0960-4797-bd41-1694bf14b8a9',
> > 'address': {'slot': '0x04', 'bus': '0x00', 'domain': '0x0000', 'type':
> > 'pci', 'function': '0x0'}, 'device': 'scsi', 'model': 'virtio-scsi',
> > 'type': 'controller'}, {'alias': 'virtio-serial0', 'specParams': {},
> > 'deviceType': 'controller', 'deviceId':
> > '4bb9c112-e027-4e7d-8b1c-32f99c7040ee', 'address': {'slot': '0x05',
> 'bus':
> > '0x00', 'domain': '0x0000', 'type': 'pci', 'function': '0x0'}, 'device':
> > 'virtio-serial', 'type': 'controller'}, {'device': 'usb', 'alias':
> 'usb0',
> > 'address': {'slot': '0x01', 'bus': '0x00', 'domain': '0x0000', 'type':
> > 'pci', 'function': '0x2'}, 'deviceType': 'controller', 'type':
> > 'controller'}, {'device': 'ide', 'alias': 'ide0', 'address': {'slot':
> > '0x01', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function':
> > '0x1'}, 'deviceType': 'controller', 'type': 'controller'}, {'alias':
> > 'video0', 'specParams': {'vram': '32768', 'ram': '65536', 'heads': '1'},
> > 'deviceType': 'video', 'deviceId':
> '23634541-3b7e-460d-9580-39504392ba36',
> > 'address': {'slot': '0x02', 'bus': '0x00', 'domain': '0x0000', 'type':
> > 'pci', 'function': '0x0'}, 'device': 'qxl', 'type': 'video'}, {'device':
> > 'spice', 'specParams': {'displayNetwork': 'ovirtmgmt',
> > 'spiceSecureChannels':
> > 'smain,sinputs,scursor,splayback,srecord,sdisplay,susbredir,ssmartcard',
> > 'keyMap': 'en-us', 'displayIp': '10.1.90.161', 'copyPasteEnable':
> 'true'},
> > 'deviceType': 'graphics', 'tlsPort': '5902', 'type': 'graphics'},
> > {'nicModel': 'pv', 'macAddr': '00:01:a4:a2:b4:30', 'linkActive': True,
> > 'network': 'ovirtmgmt', 'alias': 'net0', 'filter':
> 'vdsm-no-mac-spoofing',
> > 'specParams': {'inbound': {}, 'outbound': {}}, 'deviceType': 'interface',
> > 'deviceId': '63651662-2ddf-4611-b988-1a58d05982f6', 'address': {'slot':
> > '0x03', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function':
> > '0x0'}, 'device': 'bridge', 'type': 'interface', 'name': 'vnet5'},
> > {'nicModel': 'pv', 'macAddr': '00:01:a4:a2:b4:31', 'linkActive': True,
> > 'network': 'storage', 'alias': 'net1', 'filter': 'vdsm-no-mac-spoofing',
> > 'specParams': {'inbound': {}, 'outbound': {}}, 'deviceType': 'interface',
> > 'deviceId': 'b112d9c6-5144-4b67-912b-dcc27aabdae9', 'address': {'slot':
> > '0x07', 'bus': '0x00', 'domain': '0x0000', 'type': 'pci', 'function':
> > '0x0'}, 'device': 'bridge', 'type': 'interface', 'name': 'vnet6'},
> > {'index': '3', 'iface': 'ide', 'name': 'hdd', 'alias': 'ide0-1-1',
> > 'specParams': {'vmPayload': {'volId': 'config-2', 'file':
> > {'openstack/latest/meta_data.json':
> >
> 'ewogICJsYXVuY2hfaW5kZXgiIDogIjAiLAogICJhdmFpbGFiaWxpdHlfem9uZSIgOiAibm92YSIs\nCiAgIm5hbWUiIDogImNvbm5lY3QtdHVyYm8tc3RhZ2UtMDMiLAogICJob3N0bmFtZSIgOiAiY29u\nbmVjdC10dXJiby1zdGFnZS0wMyIsCiAgInV1aWQiIDogImJiNmIwMzdhLTZkY2ItNGZmZS04MjUw\nLTMwYjlkOWE0ZTlmZCIsCiAgIm1ldGEiIDogewogICAgImVzc2VudGlhbCIgOiAiZmFsc2UiLAog\nICAgInJvbGUiIDogInNlcnZlciIsCiAgICAiZHNtb2RlIiA6ICJsb2NhbCIKICB9Cn0=\n',
> > 'openstack/latest/user_data':
> >
> 'I2Nsb3VkLWNvbmZpZwpzc2hfcHdhdXRoOiB0cnVlCmRpc2FibGVfcm9vdDogMApvdXRwdXQ6CiAg\nYWxsOiAnPj4gL3Zhci9sb2cvY2xvdWQtaW5pdC1vdXRwdXQubG9nJwpjaHBhc3N3ZDoKICBleHBp\ncmU6IGZhbHNlCnJ1bmNtZDoKLSAnc2VkIC1pICcnL15kYXRhc291cmNlX2xpc3Q6IC9kJycgL2V0\nYy9jbG91ZC9jbG91ZC5jZmc7IGVjaG8gJydkYXRhc291cmNlX2xpc3Q6CiAgWyJOb0Nsb3VkIiwg\nIkNvbmZpZ0RyaXZlIl0nJyA+PiAvZXRjL2Nsb3VkL2Nsb3VkLmNmZycK\n'}}},
> > 'readonly': 'True', 'deviceType': 'disk', 'deviceId':
> > '6de890b2-6454-4377-9a71-bea2e46d50a8', 'address': {'bus': '1',
> > 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '1'},
> 'device':
> > 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, {'index': '2',
> > 'iface': 'ide', 'name': 'hdd', 'alias': 'ide0-1-1', 'specParams':
> {'path':
> > ''}, 'readonly': 'True', 'deviceType': 'disk', 'deviceId':
> > '2763a41b-6576-4135-b349-4fe402c31246', 'address': {'bus': '1',
> > 'controller': '0', 'type': 'drive', 'target': '0', 'unit': '1'},
> 'device':
> > 'cdrom', 'shared': 'false', 'path': '', 'type': 'disk'}, {'device':
> 'file',
> > 'alias': 'ide0-1-0', 'address': {'bus': '1', 'controller': '0', 'type':
> > 'drive', 'target': '0', 'unit': '0'}, 'deviceType': 'disk', 'type':
> 'disk'}]
> > timeOffset = -891891
> > maxVCpus = 16
> > spiceSecureChannels =
> > smain,sinputs,scursor,splayback,srecord,sdisplay,susbredir,ssmartcard
> > display = qxl
> > [root at hv-02 etc]#
> >
> >
> > ***
> > *Mark Steele*
> > CIO / VP Technical Operations | TelVue Corporation
> > TelVue - We Share Your Vision
> > 800.885.8886 x128 | msteele at telvue.com | http://www.telvue.com
> > twitter: http://twitter.com/telvue | facebook:
> > https://www.facebook.com/telvue
> >
> > On Sun, Jul 12, 2015 at 9:06 AM, Mark Steele <msteele at telvue.com> wrote:
> >
> >> I think I may have not given you all the information.
> >>
> >> I am not logging into the host - I am logging into the ovirt management.
> >>
> >> Let me try logging into the host and checking
> >>
> >>
> >>
> >> ***
> >> *Mark Steele*
> >> CIO / VP Technical Operations | TelVue Corporation
> >> TelVue - We Share Your Vision
> >> 800.885.8886 x128 | msteele at telvue.com | http://www.telvue.com
> >> twitter: http://twitter.com/telvue | facebook:
> >> https://www.facebook.com/telvue
> >>
> >> On Sun, Jul 12, 2015 at 9:03 AM, Roy Golan <rgolan at redhat.com> wrote:
> >>
> >>> On 07/12/2015 03:52 PM, Mark Steele wrote:
> >>>
> >>> That command returns nothing - I don't think qemu is running?
> >>>
> >>> Not sure how to start it on CentOS
> >>>
> >>> [root at ovirt-01 ~]# ps -ef | grep qemu
> >>>
> >>> root 23279 23130 0 08:51 pts/0 00:00:00 grep qemu
> >>>
> >>>
> >>> that mean you don't have vm running on that host. so you can restart
> >>> vdsm
> >>>
> >>>
> >>>
> >>> ***
> >>> *Mark Steele*
> >>> CIO / VP Technical Operations | TelVue Corporation
> >>> TelVue - We Share Your Vision
> >>> 800.885.8886 x128 | msteele at telvue.com | <http://www.telvue.com/>
> >>> http://www.telvue.com
> >>> twitter: <http://twitter.com/telvue>http://twitter.com/telvue |
> >>> facebook: <https://www.facebook.com/telvue>
> >>> https://www.facebook.com/telvue
> >>>
> >>> On Sun, Jul 12, 2015 at 8:45 AM, Roy Golan <rgolan at redhat.com> wrote:
> >>>
> >>>> On 07/12/2015 03:42 PM, Mark Steele wrote:
> >>>>
> >>>> I run into the same issue - I am unable to completely go into
> >>>> maintenance mode because this VM is still on it - it cannot be
> migrated
> >>>> because it is not managed.
> >>>>
> >>>> find you qemu process:
> >>>> pgrep -an qemu-kvm | grep external
> >>>>
> >>>> and kill the process
> >>>>
> >>>>
> >>>>
> >>>> [image: Inline image 1]
> >>>>
> >>>>
> >>>> ***
> >>>> *Mark Steele*
> >>>> CIO / VP Technical Operations | TelVue Corporation
> >>>> TelVue - We Share Your Vision
> >>>> 800.885.8886 x128 | <msteele at telvue.com>msteele at telvue.com |
> >>>> <http://www.telvue.com>http://www.telvue.com
> >>>> twitter: <http://twitter.com/telvue>http://twitter.com/telvue |
> >>>> facebook: <https://www.facebook.com/telvue>
> >>>> https://www.facebook.com/telvue
> >>>>
> >>>> On Sun, Jul 12, 2015 at 8:25 AM, Roy Golan < <rgolan at redhat.com>
> >>>> rgolan at redhat.com> wrote:
> >>>>
> >>>>> On 07/12/2015 03:12 PM, Mark Steele wrote:
> >>>>>
> >>>>> I think I may have found the problem:
> >>>>>
> >>>>> [root at ovirt-01 pki]# ls -lah
> >>>>> total 48K
> >>>>> drwxr-xr-x. 10 root root 4.0K Nov 14 2014 .
> >>>>> drwxr-xr-x. 118 root root 12K Jul 12 03:35 ..
> >>>>> drwxr-xr-x. 6 root root 4.0K Nov 14 2014 CA
> >>>>> drwxr-xr-x. 4 root root 4.0K Nov 14 2014 ca-trust
> >>>>> drwxr-xr-x. 2 root root 4.0K Nov 14 2014 java
> >>>>> drwxr-xr-x. 2 root root 4.0K Jul 12 07:03 nssdb
> >>>>> drwxr-xr-x. 6 ovirt ovirt 4.0K Nov 19 2014 ovirt-engine
> >>>>> drwxr-xr-x. 2 root root 4.0K Nov 14 2014 rpm-gpg
> >>>>> drwx------. 2 root root 4.0K Nov 22 2013 rsyslog
> >>>>> drwxr-xr-x. 5 root root 4.0K Nov 14 2014 tls
> >>>>> [root at ovirt-01 pki]#
> >>>>>
> >>>>> There is no vsdm directory under /etc/pki
> >>>>>
> >>>>> This is an ovirt node. Version of software is 3.5.0.1-1.el6 from the
> >>>>> ovirt management console.
> >>>>>
> >>>>> I'd like to add that I am not the person who originally installed
> >>>>> this instance - and am not entirely familiar with how it is setup and
> >>>>> installed - so I may ask ignorant questions from time to time.
> >>>>>
> >>>>>
> >>>>> not urgent but at this point it looks like it would be good to
> >>>>> reinstall this host from the webadmin. if you have the capacity,
> >>>>> you can put the host to maintenance, that will migrate vms to other
> >>>>> hosts, and then choose "reinstall" once its in "maintenance'
> >>>>>
> >>>>>
> >>>>> ***
> >>>>> *Mark Steele*
> >>>>> CIO / VP Technical Operations | TelVue Corporation
> >>>>> TelVue - We Share Your Vision
> >>>>> 800.885.8886 x128 | <msteele at telvue.com>msteele at telvue.com |
> >>>>> <http://www.telvue.com>http://www.telvue.com
> >>>>> twitter: http://twitter.com/telvue | facebook:
> >>>>> https://www.facebook.com/telvue
> >>>>>
> >>>>> On Sun, Jul 12, 2015 at 8:02 AM, Roy Golan < <rgolan at redhat.com>
> >>>>> rgolan at redhat.com> wrote:
> >>>>>
> >>>>>> On 07/12/2015 02:07 PM, Mark Steele wrote:
> >>>>>>
> >>>>>> Thank you Roy,
> >>>>>>
> >>>>>> I installed the client but am getting a permissions error when I
> >>>>>> run it
> >>>>>>
> >>>>>> [root at ovirt-01 ~]# vdsClient -s 0 list
> >>>>>> Traceback (most recent call last):
> >>>>>> File "/usr/share/vdsm/vdsClient.py", line 2678, in <module>
> >>>>>> serv.do_connect(hostPort)
> >>>>>> File "/usr/share/vdsm/vdsClient.py", line 136, in do_connect
> >>>>>> self.s = vdscli.connect(hostPort, self.useSSL, self.truststore)
> >>>>>> File "/usr/lib/python2.6/site-packages/vdsm/vdscli.py", line 110,
> >>>>>> in connect
> >>>>>> raise Exception("No permission to read file: %s" % f)
> >>>>>> Exception: No permission to read file:
> /etc/pki/vdsm/keys/vdsmkey.pem
> >>>>>>
> >>>>>>
> >>>>>> This should work. something isn't right with your setup
> >>>>>> is your host an ovirt-node? could be that you hit [1] . let me know
> >>>>>> what version are you running.
> >>>>>>
> >>>>>> please try the same with user vdsm. it should have permissions to
> >>>>>> /etc/pki/vdsm
> >>>>>>
> >>>>>> [1] <https://gerrit.ovirt.org/#/c/27779/>
> >>>>>> https://gerrit.ovirt.org/#/c/27779/
> >>>>>>
> >>>>>>
> >>>>>> If I restart vdsm, will that cause any issues with running VM's on
> >>>>>> this ovirt installation? This is our production environment.
> >>>>>>
> >>>>>>
> >>>>>> Generatlly the answer is no but lets avoid it if we can for this
> is
> >>>>>> a minor cosmetic issue I guess.
> >>>>>>
> >>>>>> just as FYI - vdsm only reconnects to the socket exposed by libvirt
> >>>>>> to control the vm lifecycle. VDSM doesn't manadate the lifecycle of
> a VM
> >>>>>> unless the engine tells is so. Storage wise there could be some
> operations
> >>>>>> but i'm almost sure they must not have effect on running VMs.
> >>>>>>
> >>>>>>
> >>>>>> Thank you
> >>>>>>
> >>>>>>
> >>>>>> ***
> >>>>>> *Mark Steele*
> >>>>>> CIO / VP Technical Operations | TelVue Corporation
> >>>>>> TelVue - We Share Your Vision
> >>>>>> 800.885.8886 x128 | <msteele at telvue.com>msteele at telvue.com |
> >>>>>> <http://www.telvue.com>http://www.telvue.com
> >>>>>> twitter: http://twitter.com/telvue | facebook:
> >>>>>> <https://www.facebook.com/telvue>https://www.facebook.com/telvue
> >>>>>>
> >>>>>> On Sun, Jul 12, 2015 at 4:09 AM, Roy Golan < <rgolan at redhat.com>
> >>>>>> rgolan at redhat.com> wrote:
> >>>>>>
> >>>>>>> On 07/09/2015 06:34 PM, Mark Steele wrote:
> >>>>>>>
> >>>>>>> Yes,
> >>>>>>>
> >>>>>>> It is displayed in the engine:
> >>>>>>>
> >>>>>>> [image: Inline image 1]
> >>>>>>>
> >>>>>>>
> >>>>>>> the vdsm on that host reports it back to the engine . since this
> vm
> >>>>>>> isn't in the engine DB it is concidered as EXTERNAL (thus the
> error 400
> >>>>>>> from the API)
> >>>>>>>
> >>>>>>> do yo know if the qemu-kvm proccess isn't running anymore?
> >>>>>>>
> >>>>>>> if the process isn't running then vdsm must clean its cache
> >>>>>>>
> >>>>>>> try to:
> >>>>>>>
> >>>>>>> yum install vdsm-cli
> >>>>>>> vdsClient -s 0 list
> >>>>>>> vdsClient -s 0 destroy {vmId}
> >>>>>>>
> >>>>>>> alternativly a vdsm restart will work (if the qemu proccess isn't
> >>>>>>> running)
> >>>>>>>
> >>>>>>>
> >>>>>>> The VM is not really running - the IP addresses that are being
> >>>>>>> reported are from another VM that was recently removed. All
> attempts to
> >>>>>>> control the VM have failed. It does not have any NICS or disk
> associated
> >>>>>>> with it - so this seems to be a ghost in the machine. I attempted
> to unlock
> >>>>>>> it using the unlock_entity.sh script - it reports successful,
> however I
> >>>>>>> still cannot do anything with the VM.
> >>>>>>>
> >>>>>>>
> >>>>>>> ***
> >>>>>>> *Mark Steele*
> >>>>>>> CIO / VP Technical Operations | TelVue Corporation
> >>>>>>> TelVue - We Share Your Vision
> >>>>>>> 800.885.8886 x128 | <msteele at telvue.com>msteele at telvue.com |
> >>>>>>> <http://www.telvue.com>http://www.telvue.com
> >>>>>>> twitter: http://twitter.com/telvue | facebook:
> >>>>>>> <https://www.facebook.com/telvue>https://www.facebook.com/telvue
> >>>>>>>
> >>>>>>> On Thu, Jul 9, 2015 at 11:11 AM, Artyom Lukianov <
> >>>>>>> <alukiano at redhat.com>alukiano at redhat.com> wrote:
> >>>>>>>
> >>>>>>>> Can you sea via engine, on what host run VM?
> >>>>>>>> Anyway if you have really run VM on host you can try to figure it
> >>>>>>>> with 'ps aux | grep qemu', if it will return you some process,
> you can just
> >>>>>>>> kill process via 'kill pid'.
> >>>>>>>> I hope it will help you.
> >>>>>>>>
> >>>>>>>> ----- Original Message -----
> >>>>>>>> From: "Mark Steele" < <msteele at telvue.com>msteele at telvue.com>
> >>>>>>>> To: "Artyom Lukianov" < <alukiano at redhat.com>alukiano at redhat.com>
> >>>>>>>> Cc: <users at ovirt.org>users at ovirt.org
> >>>>>>>> Sent: Thursday, July 9, 2015 5:42:20 PM
> >>>>>>>> Subject: Re: [ovirt-users] This VM is not managed by the engine
> >>>>>>>>
> >>>>>>>> Artyom,
> >>>>>>>>
> >>>>>>>> Thank you - I don't have vdsClient installed - can you point me to
> >>>>>>>> the
> >>>>>>>> download?
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> ***
> >>>>>>>> *Mark Steele*
> >>>>>>>> CIO / VP Technical Operations | TelVue Corporation
> >>>>>>>> TelVue - We Share Your Vision
> >>>>>>>> 800.885.8886 x128 <800.885.8886%20x128> | <msteele at telvue.com>
> >>>>>>>> msteele at telvue.com | <http://www.telvue.com>http://www.telvue.com
> >>>>>>>> twitter: <http://twitter.com/telvue>http://twitter.com/telvue |
> >>>>>>>> facebook:
> >>>>>>>> <https://www.facebook.com/telvue>https://www.facebook.com/telvue
> >>>>>>>>
> >>>>>>>> On Thu, Jul 9, 2015 at 10:11 AM, Artyom Lukianov <
> >>>>>>>> <alukiano at redhat.com>alukiano at redhat.com>
> >>>>>>>> wrote:
> >>>>>>>>
> >>>>>>>> > Please check host where VM run(vdsClient -s 0 list table), and
> >>>>>>>> you can
> >>>>>>>> > destroy it via vdsClient(vdsClient -s 0 destroy vm_id).
> >>>>>>>> > Thanks
> >>>>>>>> >
> >>>>>>>> > ----- Original Message -----
> >>>>>>>> > From: "Mark Steele" < <msteele at telvue.com>msteele at telvue.com>
> >>>>>>>> > To: <users at ovirt.org>users at ovirt.org
> >>>>>>>> > Sent: Thursday, July 9, 2015 4:38:32 PM
> >>>>>>>> > Subject: [ovirt-users] This VM is not managed by the engine
> >>>>>>>> >
> >>>>>>>> > I have a VM that was not started and is now showing as running.
> >>>>>>>> When I
> >>>>>>>> > attempt to suspend or stop it in the ovirt-shell, I get the
> >>>>>>>> message:
> >>>>>>>> >
> >>>>>>>> > status: 400
> >>>>>>>> > reason: bad request
> >>>>>>>> > detail: Cannot hibernate VM. This VM is not managed by the
> engine.
> >>>>>>>> >
> >>>>>>>> > Not sure how the VM was initially created on the ovirt manager.
> >>>>>>>> This VM is
> >>>>>>>> > not needed - how can I 'shutdown' and remove this VM?
> >>>>>>>> >
> >>>>>>>> > Thanks
> >>>>>>>> >
> >>>>>>>> > ***
> >>>>>>>> > Mark Steele
> >>>>>>>> > CIO / VP Technical Operations | TelVue Corporation
> >>>>>>>> > TelVue - We Share Your Vision
> >>>>>>>> > 800.885.8886 x128 <800.885.8886%20x128> | <msteele at telvue.com>
> >>>>>>>> msteele at telvue.com | <http://www.telvue.com>http://www.telvue.com
> >>>>>>>> > twitter: <http://twitter.com/telvue>http://twitter.com/telvue |
> >>>>>>>> facebook:
> >>>>>>>> > <https://www.facebook.com/telvue>
> https://www.facebook.com/telvue
> >>>>>>>> >
> >>>>>>>> > _______________________________________________
> >>>>>>>> > Users mailing list
> >>>>>>>> > <Users at ovirt.org>Users at ovirt.org
> >>>>>>>> > <http://lists.ovirt.org/mailman/listinfo/users>
> >>>>>>>> http://lists.ovirt.org/mailman/listinfo/users
> >>>>>>>> >
> >>>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> _______________________________________________
> >>>>>>> Users mailing listUsers at ovirt.orghttp://
> lists.ovirt.org/mailman/listinfo/users
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>
> >>>>
> >>>
> >>>
> >>
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150712/23c7a11b/attachment-0001.html>
More information about the Users
mailing list