[ovirt-users] Dell DRAC 8

[Patrick Russell]

I ended up using the drac5 fence, secure, and cmd_prompt=>

This works if I connect to the individual idrac for each blade. I never did get it working from the CMC level, but this way is acceptable.

-Patrick


From: Nathanaël Blanchet
Date: Friday, March 6, 2015 at 5:11 AM
To: "users at ovirt.org<mailto:users at ovirt.org>"
Subject: Re: [ovirt-users] Dell DRAC 8

Hi,

Did you try with this options? It is intended for the second generation of idrac7 but, it may work for idrac8.

----- Original Message -----
From: "Oved Ourfali" <oourfali at redhat.com><mailto:oourfali at redhat.com>
To: "Nathanaël Blanchet" <blanchet at abes.fr><mailto:blanchet at abes.fr>
Cc: users at ovirt.org<mailto:users at ovirt.org>, "Eli Mesika" <emesika at redhat.com><mailto:emesika at redhat.com>
Sent: Monday, February 2, 2015 7:04:05 PM
Subject: Re: [ovirt-users] power management test fails while ipmi command    successes

We've recently pushed a patch to have lanplus as a default option for drac7.
Until then you can set this option explicitly through the additional options
in the power management configuration tab in the edit/add host dialog.
Please check whether it helps.

CC-ing Eli, just in case I've missed something.
Please make sure that you have the following in the UI options field (on the Edit dialog PM TAB)

privlvl=OPERATOR,lanplus,delay=10


Regards,
Oved

On Feb 2, 2015 6:10 PM, Nathanaël Blanchet <blanchet at abes.fr><mailto:blanchet at abes.fr> wrote:
Hi all,

I've just installed two new dell r630 hosts and every thing is alright
with vdsm registration, but power management test always fails with ipmi
or drac7 item. When I start the manual ipmi command like this "ipmitool
-I lanplus -H 10.34.20.45 -U root chassis power status", it always
success with "power chassis is on".
All of my other dell servers (r710, r620) success on power management test.
Is it a known bug?
_______________________________________________
Users mailing list
Users at ovirt.org<mailto:Users at ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users

Le 06/03/2015 03:54, Patrick Russell a écrit :
Looks like it’s just the CMC, I can use power management on the individual sled DRAC’s using the drac5 fence agent no problem.

-Patrick


From: Volusion Inc
Date: Thursday, March 5, 2015 at 8:22 PM
To: "users at ovirt.org<mailto:users at ovirt.org>"
Subject: [ovirt-users] Dell DRAC 8

Anyone having success with fencing and DRAC 8 via CMC? We just received a couple Dell FX2 chassis and we’re having trouble getting the fencing agents to work on these. It is a CMC setup similar to the dell blade chassis, but it DRAC version 8.

-Patrick



_______________________________________________
Users mailing list
Users at ovirt.org<mailto:Users at ovirt.org>http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150306/17701c6a/attachment.html>