[ovirt-users] VMs freezing during heals

Darrell Budic budic at onholyground.com
Fri Mar 20 18:57:52 UTC 2015 

What version of gluster are you running on these?

I’ve seen high load during heals bounce my hosted engine around due to overall system load, but never pause anything else. Cent 7 combo storage/host systems, gluster 3.5.2.


> On Mar 20, 2015, at 9:57 AM, Alastair Neil <ajneil.tech at gmail.com> wrote:
> 
> Pranith
> 
> I have run a pretty straightforward test.  I created a two brick 50 G replica volume with normal lvm bricks, and installed two servers, one centos 6.6 and one centos 7.0.  I kicked off bonnie++ on both to generate some file system activity and then made the volume replica 3.  I saw no issues on the servers.   
> 
> Not clear if this is a sufficiently rigorous test and the Volume I have had issues on is a 3TB volume  with about 2TB used.
> 
> -Alastair
> 
> 
> On 19 March 2015 at 12:30, Alastair Neil <ajneil.tech at gmail.com <mailto:ajneil.tech at gmail.com>> wrote:
> I don't think I have the resources to test it meaningfully.  I have about 50 vms on my primary storage domain.  I might be able to set up a small 50 GB volume and provision 2 or 3 vms running test loads but I'm not sure it would be comparable.  I'll give it a try and let you know if I see similar behaviour.
> 
> On 19 March 2015 at 11:34, Pranith Kumar Karampuri <pkarampu at redhat.com <mailto:pkarampu at redhat.com>> wrote:
> Without thinly provisioned lvm.
> 
> Pranith
> 
> On 03/19/2015 08:01 PM, Alastair Neil wrote:
>> do you mean raw partitions as bricks or simply with out thin provisioned lvm?
>> 
>> 
>> 
>> On 19 March 2015 at 00:32, Pranith Kumar Karampuri <pkarampu at redhat.com <mailto:pkarampu at redhat.com>> wrote:
>> Could you let me know if you see this problem without lvm as well?
>> 
>> Pranith
>> 
>> On 03/18/2015 08:25 PM, Alastair Neil wrote:
>>> I am in the process of replacing the bricks with thinly provisioned lvs yes.
>>> 
>>> 
>>> 
>>> On 18 March 2015 at 09:35, Pranith Kumar Karampuri <pkarampu at redhat.com <mailto:pkarampu at redhat.com>> wrote:
>>> hi,
>>>       Are you using thin-lvm based backend on which the bricks are created?
>>> 
>>> Pranith
>>> 
>>> On 03/18/2015 02:05 AM, Alastair Neil wrote:
>>>> I have a Ovirt cluster with 6 VM hosts and 4 gluster nodes. There are two virtualisation clusters one with two nehelem nodes and one with  four  sandybridge nodes. My master storage domain is a GlusterFS backed by a replica 3 gluster volume from 3 of the gluster nodes.  The engine is a hosted engine 3.5.1 on 3 of the sandybridge nodes, with storage broviede by nfs from a different gluster volume.  All the hosts are CentOS 6.6.
>>>> 
>>>>  vdsm-4.16.10-8.gitc937927.el6
>>>> glusterfs-3.6.2-1.el6
>>>> 2.6.32 - 504.8.1.el6.x86_64
>>>> 
>>>> Problems happen when I try to add a new brick or replace a brick eventually the self heal will kill the VMs. In the VM's logs I see kernel hung task messages. 
>>>> 
>>>> Mar 12 23:05:16 static1 kernel: INFO: task nginx:1736 blocked for more than 120 seconds.
>>>> Mar 12 23:05:16 static1 kernel:      Not tainted 2.6.32-504.3.3.el6.x86_64 #1
>>>> Mar 12 23:05:16 static1 kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>>> Mar 12 23:05:16 static1 kernel: nginx         D 0000000000000001     0  1736   1735 0x00000080
>>>> Mar 12 23:05:16 static1 kernel: ffff8800778b17a8 0000000000000082 0000000000000000 00000000000126c0
>>>> Mar 12 23:05:16 static1 kernel: ffff88007e5c6500 ffff880037170080 0006ce5c85bd9185 ffff88007e5c64d0
>>>> Mar 12 23:05:16 static1 kernel: ffff88007a614ae0 00000001722b64ba ffff88007a615098 ffff8800778b1fd8
>>>> Mar 12 23:05:16 static1 kernel: Call Trace:
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a885>] schedule_timeout+0x215/0x2e0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a503>] wait_for_common+0x123/0x180
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81064b90>] ? default_wake_function+0x0/0x20
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210a76>] ? _xfs_buf_read+0x46/0x60 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>] ? xfs_trans_read_buf+0x197/0x410 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a61d>] wait_for_completion+0x1d/0x20
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa020ff5b>] xfs_buf_iowait+0x9b/0x100 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>] ? xfs_trans_read_buf+0x197/0x410 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210a76>] _xfs_buf_read+0x46/0x60 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210b3b>] xfs_buf_read+0xab/0x100 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>] xfs_trans_read_buf+0x197/0x410 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01ee6a4>] xfs_imap_to_bp+0x54/0x130 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01f077b>] xfs_iread+0x7b/0x1b0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811ab77e>] ? inode_init_always+0x11e/0x1c0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eb5ee>] xfs_iget+0x27e/0x6e0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eae1d>] ? xfs_iunlock+0x5d/0xd0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0209366>] xfs_lookup+0xc6/0x110 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0216024>] xfs_vn_lookup+0x54/0xa0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119dc65>] do_lookup+0x1a5/0x230
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119e8f4>] __link_path_walk+0x7a4/0x1000
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811738e7>] ? cache_grow+0x217/0x320
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119f40a>] path_walk+0x6a/0xe0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119f61b>] filename_lookup+0x6b/0xc0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811a0747>] user_path_at+0x57/0xa0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0204e74>] ? _xfs_trans_commit+0x214/0x2a0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eae3e>] ? xfs_iunlock+0x7e/0xd0 [xfs]
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193bc0>] vfs_fstatat+0x50/0xa0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811aaf5d>] ? touch_atime+0x14d/0x1a0
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193d3b>] vfs_stat+0x1b/0x20
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193d64>] sys_newstat+0x24/0x50
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff810e5c87>] ? audit_syscall_entry+0x1d7/0x200
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff810e5a7e>] ? __audit_syscall_exit+0x25e/0x290
>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8100b072>] system_call_fastpath+0x16/0x1b
>>>> 
>>>> 
>>>> I am wondering if my volume settings are causing this.  Can anyone with more knowledge take a look and let me know:
>>>> 
>>>> network.remote-dio: on
>>>> performance.stat-prefetch: off
>>>> performance.io-cache: off
>>>> performance.read-ahead: off
>>>> performance.quick-read: off
>>>> nfs.export-volumes: on
>>>> network.ping-timeout: 20
>>>> cluster.self-heal-readdir-size: 64KB
>>>> cluster.quorum-type: auto
>>>> cluster.data-self-heal-algorithm: diff
>>>> cluster.self-heal-window-size: 8
>>>> cluster.heal-timeout: 500
>>>> cluster.self-heal-daemon: on
>>>> cluster.entry-self-heal: on
>>>> cluster.data-self-heal: on
>>>> cluster.metadata-self-heal: on
>>>> cluster.readdir-optimize: on
>>>> cluster.background-self-heal-count: 20
>>>> cluster.rebalance-stats: on
>>>> cluster.min-free-disk: 5%
>>>> cluster.eager-lock: enable
>>>> storage.owner-uid: 36
>>>> storage.owner-gid: 36
>>>> auth.allow:*
>>>> user.cifs: disable
>>>> cluster.server-quorum-ratio: 51%
>>>> 
>>>> Many Thanks,  Alastair
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> Users mailing list
>>>> Users at ovirt.org <mailto:Users at ovirt.org>
>>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
>>> 
>>> 
>>> _______________________________________________
>>> Users mailing list
>>> Users at ovirt.org <mailto:Users at ovirt.org>
>>> http://lists.ovirt.org/mailman/listinfo/users <http://lists.ovirt.org/mailman/listinfo/users>
>>> 
>>> 
>> 
>> 
> 
> 
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150320/836b2565/attachment-0001.html>

More information about the Users mailing list