[ovirt-users] VMs freezing during heals

Alastair Neil ajneil.tech at gmail.com
Fri Mar 20 19:22:00 UTC 2015


CentOS 6.6


>  vdsm-4.16.10-8.gitc937927.el6
> glusterfs-3.6.2-1.el6
> 2.6.32 - 504.8.1.el6.x86_64


moved to 3.6 specifically to get the snapshotting feature, hence my desire
to migrate to thinly provisioned lvm bricks.




On 20 March 2015 at 14:57, Darrell Budic <budic at onholyground.com> wrote:

> What version of gluster are you running on these?
>
> I’ve seen high load during heals bounce my hosted engine around due to
> overall system load, but never pause anything else. Cent 7 combo
> storage/host systems, gluster 3.5.2.
>
>
> On Mar 20, 2015, at 9:57 AM, Alastair Neil <ajneil.tech at gmail.com> wrote:
>
> Pranith
>
> I have run a pretty straightforward test.  I created a two brick 50 G
> replica volume with normal lvm bricks, and installed two servers, one
> centos 6.6 and one centos 7.0.  I kicked off bonnie++ on both to generate
> some file system activity and then made the volume replica 3.  I saw no
> issues on the servers.
>
> Not clear if this is a sufficiently rigorous test and the Volume I have
> had issues on is a 3TB volume  with about 2TB used.
>
> -Alastair
>
>
> On 19 March 2015 at 12:30, Alastair Neil <ajneil.tech at gmail.com> wrote:
>
>> I don't think I have the resources to test it meaningfully.  I have about
>> 50 vms on my primary storage domain.  I might be able to set up a small 50
>> GB volume and provision 2 or 3 vms running test loads but I'm not sure it
>> would be comparable.  I'll give it a try and let you know if I see similar
>> behaviour.
>>
>> On 19 March 2015 at 11:34, Pranith Kumar Karampuri <pkarampu at redhat.com>
>> wrote:
>>
>>>  Without thinly provisioned lvm.
>>>
>>> Pranith
>>>
>>> On 03/19/2015 08:01 PM, Alastair Neil wrote:
>>>
>>> do you mean raw partitions as bricks or simply with out thin provisioned
>>> lvm?
>>>
>>>
>>>
>>> On 19 March 2015 at 00:32, Pranith Kumar Karampuri <pkarampu at redhat.com>
>>> wrote:
>>>
>>>>  Could you let me know if you see this problem without lvm as well?
>>>>
>>>> Pranith
>>>>
>>>> On 03/18/2015 08:25 PM, Alastair Neil wrote:
>>>>
>>>> I am in the process of replacing the bricks with thinly provisioned lvs
>>>> yes.
>>>>
>>>>
>>>>
>>>> On 18 March 2015 at 09:35, Pranith Kumar Karampuri <pkarampu at redhat.com
>>>> > wrote:
>>>>
>>>>>  hi,
>>>>>       Are you using thin-lvm based backend on which the bricks are
>>>>> created?
>>>>>
>>>>> Pranith
>>>>>
>>>>> On 03/18/2015 02:05 AM, Alastair Neil wrote:
>>>>>
>>>>>  I have a Ovirt cluster with 6 VM hosts and 4 gluster nodes. There
>>>>> are two virtualisation clusters one with two nehelem nodes and one with
>>>>>  four  sandybridge nodes. My master storage domain is a GlusterFS backed by
>>>>> a replica 3 gluster volume from 3 of the gluster nodes.  The engine is a
>>>>> hosted engine 3.5.1 on 3 of the sandybridge nodes, with storage broviede by
>>>>> nfs from a different gluster volume.  All the hosts are CentOS 6.6.
>>>>>
>>>>>   vdsm-4.16.10-8.gitc937927.el6
>>>>>> glusterfs-3.6.2-1.el6
>>>>>> 2.6.32 - 504.8.1.el6.x86_64
>>>>>
>>>>>
>>>>>  Problems happen when I try to add a new brick or replace a brick
>>>>> eventually the self heal will kill the VMs. In the VM's logs I see kernel
>>>>> hung task messages.
>>>>>
>>>>>  Mar 12 23:05:16 static1 kernel: INFO: task nginx:1736 blocked for
>>>>>> more than 120 seconds.
>>>>>> Mar 12 23:05:16 static1 kernel:      Not tainted
>>>>>> 2.6.32-504.3.3.el6.x86_64 #1
>>>>>> Mar 12 23:05:16 static1 kernel: "echo 0 >
>>>>>> /proc/sys/kernel/hung_task_timeout_secs" disables this message.
>>>>>> Mar 12 23:05:16 static1 kernel: nginx         D 0000000000000001
>>>>>> 0  1736   1735 0x00000080
>>>>>> Mar 12 23:05:16 static1 kernel: ffff8800778b17a8 0000000000000082
>>>>>> 0000000000000000 00000000000126c0
>>>>>> Mar 12 23:05:16 static1 kernel: ffff88007e5c6500 ffff880037170080
>>>>>> 0006ce5c85bd9185 ffff88007e5c64d0
>>>>>> Mar 12 23:05:16 static1 kernel: ffff88007a614ae0 00000001722b64ba
>>>>>> ffff88007a615098 ffff8800778b1fd8
>>>>>> Mar 12 23:05:16 static1 kernel: Call Trace:
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a885>]
>>>>>> schedule_timeout+0x215/0x2e0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a503>]
>>>>>> wait_for_common+0x123/0x180
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81064b90>] ?
>>>>>> default_wake_function+0x0/0x20
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210a76>] ?
>>>>>> _xfs_buf_read+0x46/0x60 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>] ?
>>>>>> xfs_trans_read_buf+0x197/0x410 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8152a61d>]
>>>>>> wait_for_completion+0x1d/0x20
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa020ff5b>]
>>>>>> xfs_buf_iowait+0x9b/0x100 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>] ?
>>>>>> xfs_trans_read_buf+0x197/0x410 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210a76>]
>>>>>> _xfs_buf_read+0x46/0x60 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0210b3b>]
>>>>>> xfs_buf_read+0xab/0x100 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa02063c7>]
>>>>>> xfs_trans_read_buf+0x197/0x410 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01ee6a4>]
>>>>>> xfs_imap_to_bp+0x54/0x130 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01f077b>]
>>>>>> xfs_iread+0x7b/0x1b0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811ab77e>] ?
>>>>>> inode_init_always+0x11e/0x1c0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eb5ee>]
>>>>>> xfs_iget+0x27e/0x6e0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eae1d>] ?
>>>>>> xfs_iunlock+0x5d/0xd0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0209366>]
>>>>>> xfs_lookup+0xc6/0x110 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0216024>]
>>>>>> xfs_vn_lookup+0x54/0xa0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119dc65>]
>>>>>> do_lookup+0x1a5/0x230
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119e8f4>]
>>>>>> __link_path_walk+0x7a4/0x1000
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811738e7>] ?
>>>>>> cache_grow+0x217/0x320
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119f40a>]
>>>>>> path_walk+0x6a/0xe0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8119f61b>]
>>>>>> filename_lookup+0x6b/0xc0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811a0747>]
>>>>>> user_path_at+0x57/0xa0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa0204e74>] ?
>>>>>> _xfs_trans_commit+0x214/0x2a0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffffa01eae3e>] ?
>>>>>> xfs_iunlock+0x7e/0xd0 [xfs]
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193bc0>]
>>>>>> vfs_fstatat+0x50/0xa0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff811aaf5d>] ?
>>>>>> touch_atime+0x14d/0x1a0
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193d3b>]
>>>>>> vfs_stat+0x1b/0x20
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff81193d64>]
>>>>>> sys_newstat+0x24/0x50
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff810e5c87>] ?
>>>>>> audit_syscall_entry+0x1d7/0x200
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff810e5a7e>] ?
>>>>>> __audit_syscall_exit+0x25e/0x290
>>>>>> Mar 12 23:05:16 static1 kernel: [<ffffffff8100b072>]
>>>>>> system_call_fastpath+0x16/0x1b
>>>>>
>>>>>
>>>>>
>>>>>  I am wondering if my volume settings are causing this.  Can anyone
>>>>> with more knowledge take a look and let me know:
>>>>>
>>>>>  network.remote-dio: on
>>>>>> performance.stat-prefetch: off
>>>>>> performance.io-cache: off
>>>>>> performance.read-ahead: off
>>>>>> performance.quick-read: off
>>>>>> nfs.export-volumes: on
>>>>>> network.ping-timeout: 20
>>>>>> cluster.self-heal-readdir-size: 64KB
>>>>>> cluster.quorum-type: auto
>>>>>> cluster.data-self-heal-algorithm: diff
>>>>>> cluster.self-heal-window-size: 8
>>>>>> cluster.heal-timeout: 500
>>>>>> cluster.self-heal-daemon: on
>>>>>> cluster.entry-self-heal: on
>>>>>> cluster.data-self-heal: on
>>>>>> cluster.metadata-self-heal: on
>>>>>> cluster.readdir-optimize: on
>>>>>> cluster.background-self-heal-count: 20
>>>>>> cluster.rebalance-stats: on
>>>>>> cluster.min-free-disk: 5%
>>>>>> cluster.eager-lock: enable
>>>>>> storage.owner-uid: 36
>>>>>> storage.owner-gid: 36
>>>>>> auth.allow:*
>>>>>> user.cifs: disable
>>>>>> cluster.server-quorum-ratio: 51%
>>>>>
>>>>>
>>>>>  Many Thanks,  Alastair
>>>>>
>>>>>
>>>>>
>>>>>  _______________________________________________
>>>>> Users mailing listUsers at ovirt.orghttp://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Users mailing list
>>>>> Users at ovirt.org
>>>>> http://lists.ovirt.org/mailman/listinfo/users
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150320/25fc481e/attachment-0001.html>


More information about the Users mailing list