[ovirt-users] [Gluster-users] GlusterFS for production use with Ovirt
Punit Dambiwal
hypunit at gmail.com
Tue Mar 24 03:49:09 UTC 2015
Hi Paul,
Thanks for the updates...
A few things to clarify
1) are all 4 for Gluster or are they the whole cluster.keep in mind that
Ovirt expects that you are running Gluster on different nodes than your
VM's. while I do not completely agree with that idea that is how it is now.
Comment :- All 4 servers are the part of the one gluster volume...
2) RAID hardware is not necessarily a bad thing, in fact the cache may help
significantly. that said it is not required.things to keep in mind if you
are using RAID hardware for performance..
2.a) RAID 0 will give you the best speed if you are using 3 nodes for quorum.
keep in mind this will require more work in the case of a drive failure to
remake the brick.
2.b) if you are only doing a mirror across 2 bricks RAID 0 may be acceptable
but consider using 1+0 or RAID 5 the performance on the two may vary
depending on the RAID controller but 1+0 is generally faster.
2.c) always optimize for the stripe which in theory should be automatic if
the RAID controller reports the required information to do it, but in
practice most do not so you should do it manually and Red Hat's support
site just added a nice tool to do it for you.
Comment :- What about if i will split my 24 SSD in to two virtual drive
with RAID 6...actually i want to leverage the performance of the
SSD..without wastage too much of the disk capacity and redundancy...
Thanks,
Punit
On Tue, Mar 24, 2015 at 11:01 AM, Paul Robert Marino <prmarino1 at gmail.com>
wrote:
> A few things to clarify
> 1) are all 4 for Gluster or are they the whole cluster.
> keep in mind that Ovirt expects that you are running Gluster on
> different nodes than your VM's. while I do not completely agree with
> that idea that is how it is now.
>
> 2) RAID hardware is not necessarily a bad thing, in fact the cache may
> help significantly. that said it is not required.
> things to keep in mind if you are using RAID hardware for performance
> 2.a) RAID 0 will give you the best speed if you are using 3 nodes for
> quorum. keep in mind this will require more work in the case of a
> drive failure to remake the brick.
> 2.b) if you are only doing a mirror across 2 bricks RAID 0 may be
> acceptable but consider using 1+0 or RAID 5 the performance on the two
> may vary depending on the RAID controller but 1+0 is generally faster.
> 2.c) always optimize for the stripe which in theory should be
> automatic if the RAID controller reports the required information to
> do it, but in practice most do not so you should do it manually and
> Red Hat's support site just added a nice tool to do it for you.
>
> 3) for performance more RAM is rarely a bad thing; however it can be
> with sustained writes.If you are constantly writing faster than the
> disks can handle you will eventually fill the buffers and block till
> they flush. so the answer here is if you are mostly dealing with reads
> more and bursts of writes more ram is better. if you are dealing with
> constant writes it may cause uneven performance and may in fact be
> detrimental.
>
> 4) On the 10Gb consider using consider using RDMA Iverbs over Ethernet
> it may help.
>
> 5) Look closely at the scheduler on the disks the default these days
> is CFQ (Completely Fair Queuing). I find DEADLINE works better for
> Gluster; however depending on if you are using a RAID and you have a
> properly aligned file system you may find NOOP may provide better
> performance you need to do some testing with your hardware to
> determine if this is the case.
>
> On Mon, Mar 23, 2015 at 9:43 PM, Punit Dambiwal <hypunit at gmail.com> wrote:
> > Hi,
> >
> > I want to use Glusterfs with Ovirt 3.5...please help me to make the
> > architecture stable for the production use :-
> >
> > I have 4 servers...every server can host 24 SSD disk(As bricks)..i want
> to
> > deploy distributed replicated storage with replica =2....i don't want to
> use
> > the Hardware RAID...as i think it will badly impact the performance...
> >
> > 1. Glusterfs 3.5 or 3.6 ?? (which one will be stable for the production
> > use).
> > 2. Do i use the Hardware RAID or Not ??
> > 3. IF HW RAID then which RAID level and does it impact the performance...
> > 4. I want to make it rock solid...so it can use for production purpose...
> > 5. How much RAM should be sufficient on each server...on the each server
> i
> > have two E5 CPU's...
> > 6. For Network Connectivity i have 2*10G NIC with bonding on each
> server...
> >
> > Thanks,
> > Punit
> >
> > _______________________________________________
> > Gluster-users mailing list
> > Gluster-users at gluster.org
> > http://www.gluster.org/mailman/listinfo/gluster-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20150324/0b065bb6/attachment-0001.html>
More information about the Users
mailing list