[ovirt-users] Hosted Engine config in our hardware environment

[Eric Wong]

Simone:

Thanks for your quick respond.  It clarified some of the confusion I have with the hosted-engine.

However, I still have one question.  Sorry.  It is my bad that I did not explain clearer on our hardware configuration, mainly on the SAN.  We also have 2 SAN, one on D1 & another one on X1.  The blades on D1 can only see the storage in SAN D1.  X1 blades can only see SAN X1.

Does it mean that we will need to manage our oVirt environment separately when we switch to use hosted-engine?  Because from your explanation, the hosted-engine in selected nodes will use separate iSCSI hosted-engine storage to store the DB.  Since there is no cross D1 & X1 storage in our current config, that means we need separate hosted-engine setup on each side.

Thanks,
Eric


-----Original Message-----
From: Simone Tiraboschi [mailto:stirabos at redhat.com] 
Sent: Friday, March 20, 2015 7:06 PM
To: Eric Wong
Cc: users at ovirt.org
Subject: Re: [ovirt-users] Hosted Engine config in our hardware environment



----- Original Message -----
> From: "Eric Wong" <Eric.Wong at solvians.com>
> To: users at ovirt.org
> Sent: Thursday, March 19, 2015 7:04:04 PM
> Subject: [ovirt-users] Hosted Engine config in our hardware environment
> 
> Hello oVirt guru out there:
> 
> I want to seek some advice on upgrade path for our oVirt management vm
> configuration. We have been using oVirt for over 3 years. When we first
> setup oVirt environment, Hosted Engine componment did not exist. Our
> question is should we migrate our current configuration to use Hosted
> Engine?
> 
> First let me give an overview of our configuration. We have blade servers in
> 2 separate racks. D1 & X1. Each side has 10 blades. Storage is iSCSI SAN.
> 
> Inside our oVirt 3.5.0.1-1.el6 installation, it is configured with 2 data
> centers. D1 & X1. Each datacenter has the 10 blades for that side. The
> management function of oVirt (oVirt web console) is running off 2 VMs,
> ovirt-mgmt-1 on D1, and ovirt-mgmt-2 on X1. We have keepalived to maintain a
> flowing IP for the oVirt management console. The keepalived script makes
> sure only one copy of ovirt-engine is running at any time. It can be on D1
> or X1. The mgmt VMs have Postgresql setup in replication mode. In case one
> of the mgmt vm failed, the other mgmt vm on the other rack can pick up the
> mgmt role. Both mgmt VMs can see all blades and SAN resources on D1 & X1.
> 
> This configuration has been working well for us. The drawback is if both
> ovirt mgmt vm crashed, we will not be able to start them or make any change
> to the ovirt environment. It is because the mgmt VMs are running within the
> oVirt domain.
> 
> We tried to upgrade our configuration to Hosted Engine configuration. From
> what I understand, the Hosted Engine will run in a separate storage domain.
> In both times we tried to upgrade to Hosted Engine, they both failed during
> export and import of current configuration.

Here you can find some hint about how to migrate to hosted-engine:
http://www.ovirt.org/Migrate_to_Hosted_Engine

> I think my questions are:
> - will the Hosted Engine model works in our hardware configuration. With
> hardware in 2 racks, D1 & X1. Can a single Hosted Engine manage hardware on
> both sides?
> - How can we achieve redundancy when running Hosted Engine? We need to have
> management capibility in case one side completely failed.
> 
> Thanks in advance.
> Eric
> 
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>