[ovirt-users] My feedback on network setting after installing OVirt

John Joseph jjk_saji at yahoo.com
Mon May 11 10:25:36 UTC 2015






On Monday, 11 May 2015 2:14 PM, Yedidyah Bar David <didi at redhat.com> wrote:
----- Original Message -----
> From: "John Joseph" <jjk_saji at yahoo.com>
> To: users at ovirt.org
> Sent: Sunday, May 10, 2015 2:37:39 PM
> Subject: [ovirt-users] My feedback on network setting after installing OVirt
> 
> Hi All,
> 
> Like to give my feedback about how the network interface behaved after OVirt
> I have used
> 
> CentOS 6.6 64 bit, updated
> 
> Ovirt stable from the repo
> 
> Now after the installation, and configuration you  get "ovirtmgmt" interface
> and "ovirtmgmt" interface gets the IP address and everything is fine . Now
> reboot it
> 
> result is that when you give ifconfig , eth0 is not displayed and "ovirtmgmt"
> do not have IP address
> 
> This stage solved by giving ifconfig eth0 up
> 
> and restarting the network, it will give "ovirtmgmt" an IP now

So you have to do this on every reboot?


Yes on every reboot I have to do it 
> 
> 
> 
> I tested it using different installation, with DHCP or manual configuration
> for eth0 , in both the case the same experience

Sounds a bit like [1]. Adding Petr, this bug's owner.

Can you please check/post relevant conf/log files (ifcfg*, vdsm/system logs etc)?

[1] https://bugzilla.redhat.com/show_bug.cgi?id=1154399


> 
> Giving my feedback,
Thanks a Lot
Joseph John 



Thanks,
-- 
Didi



More information about the Users mailing list