[ovirt-users] My feedback on network setting after installing OVirt

[Petr Horacek]

----- Original Message -----
> From: "John Joseph" <jjk_saji at yahoo.com>
> To: "Yedidyah Bar David" <didi at redhat.com>
> Cc: users at ovirt.org, "Petr Horacek" <phoracek at redhat.com>
> Sent: Monday, May 11, 2015 12:25:36 PM
> Subject: Re: [ovirt-users] My feedback on network setting after installing OVirt
> 
> 
> 
> 
> 
> 
> On Monday, 11 May 2015 2:14 PM, Yedidyah Bar David <didi at redhat.com> wrote:
> ----- Original Message -----
> > From: "John Joseph" <jjk_saji at yahoo.com>
> > To: users at ovirt.org
> > Sent: Sunday, May 10, 2015 2:37:39 PM
> > Subject: [ovirt-users] My feedback on network setting after installing
> > OVirt
> > 
> > Hi All,
> > 
> > Like to give my feedback about how the network interface behaved after
> > OVirt
> > I have used
> > 
> > CentOS 6.6 64 bit, updated
> > 
> > Ovirt stable from the repo
> > 
> > Now after the installation, and configuration you  get "ovirtmgmt"
> > interface
> > and "ovirtmgmt" interface gets the IP address and everything is fine . Now
> > reboot it
> > 
> > result is that when you give ifconfig , eth0 is not displayed and
> > "ovirtmgmt"
> > do not have IP address
> > 
> > This stage solved by giving ifconfig eth0 up
> > 
> > and restarting the network, it will give "ovirtmgmt" an IP now
> 
> So you have to do this on every reboot?
> 
> 
> Yes on every reboot I have to do it
> > 
> > 
> > 
> > I tested it using different installation, with DHCP or manual configuration
> > for eth0 , in both the case the same experience
> 
> Sounds a bit like [1]. Adding Petr, this bug's owner.
> 
> Can you please check/post relevant conf/log files (ifcfg*, vdsm/system logs
> etc)?
> 
> [1] https://bugzilla.redhat.com/show_bug.cgi?id=1154399
> 
> 
> > 
> > Giving my feedback,
> Thanks a Lot
> Joseph John
> 
> 
> 
> Thanks,
> --
> Didi
> 

Hello,

John, could you please compare your problem with the bug Didi mentioned
(but i don't think it's the same case, you don't use a manually created
bonding) and if it is not the case, create a new bug entry [2] and
provide us logs and exact steps to reproduce?

[2] https://bugzilla.redhat.com/enter_bug.cgi?product=oVirt

Thanks a lot and best regards,
Petr