[ovirt-users] no guest info shown and timezone warning
Paul Groeneweg | Pazion
paul at pazion.nl
Mon Nov 30 21:37:46 UTC 2015
Bug reported: https://bugzilla.redhat.com/show_bug.cgi?id=1286847
Op zo 29 nov. 2015 om 16:34 schreef Gianluca Cecchi <
gianluca.cecchi at gmail.com>:
> On Sun, Nov 29, 2015 at 12:41 AM, Yaniv Dary <ydary at redhat.com> wrote:
>
>> Can you please open a bug to track this issue?
>>
>> Yaniv Dary
>> Technical Product Manager
>> Red Hat Israel Ltd.
>> 34 Jerusalem Road
>> Building A, 4th floor
>> Ra'anana, Israel 4350109
>>
>> Tel : +972 (9) 7692306
>> 8272306
>> Email: ydary at redhat.com
>> IRC : ydary
>>
>>
>> On Fri, Nov 13, 2015 at 9:34 PM, Paul Groeneweg | Pazion <paul at pazion.nl>
>> wrote:
>>
>>> I checked version, I am running 1.0.11
>>> I restarted, but still not showing info in the tab ( none of the VMs )
>>> See screenshot: http://screencast.com/t/JejTsLAxuXw
>>>
>>> Regards,
>>> Paul Groeneweg
>>>
>>>>
>>>>
>>>>
>>>
>
> Hello in my case I have a clean installed 3.6.0 environment with self
> hosted engine.
> I installed and configured a CentOS 7.1 guest and I'm able to see guest
> info.
> See screenshot.
>
> https://drive.google.com/file/d/0BwoPbcrMv8mvVVY4NUJiRU0wTU0/view?usp=sharing
>
> But I do have the time zone problem.
> I verified that my self hosted engine (I did the deploy through the
> provided appliance) was by default configured with UTC timezone.
> I then changed it using inside its OS the command:
>
> timedatectl set-timezone Europe/Rome
>
> then I made global maintenance and restarted both the host and the engine.
> I still had the exclamation mark.
> Then I modified the VM inside the GUI in Edit VM --> System --> General .
> As you see in screenshot it was Etc/GMT and then Europe/Berlin.
> And finally shutdown/power on (because reboot doesn't instantiate a new
> qemu/kvm process)
> And now it is ok from an OS point of view andalso GUI point of view.
> See:
>
> https://drive.google.com/file/d/0BwoPbcrMv8mvSmp1QjVEMEVPQms/view?usp=sharing
>
> I don't know if the update itself from 3.5 to 3.6 could have scrambled
> anything, but in my case all is ok if the various configurations involved
> match.
>
> BTW: I noticed that the "Guest Info" visualized data are not so dynamic:
> sometimes if I do some changes, I have to click another tab (eg affinity
> groups) and then "Guest Info" again to be able to see updated values
>
> host:
> # timedatectl status ; ssh ractorshe "timedatectl status" ; ssh 10.4.4.29
> "timedatectl status"
> Local time: Sun 2015-11-29 16:27:49 CET
> Universal time: Sun 2015-11-29 15:27:49 UTC
> RTC time: Sun 2015-11-29 15:27:49
> Timezone: Europe/Rome (CET, +0100)
> NTP enabled: yes
> NTP synchronized: yes
> RTC in local TZ: no
> DST active: no
> Last DST change: DST ended at
> Sun 2015-10-25 02:59:59 CEST
> Sun 2015-10-25 02:00:00 CET
> Next DST change: DST begins (the clock jumps one hour forward) at
> Sun 2016-03-27 01:59:59 CET
> Sun 2016-03-27 03:00:00 CEST
>
> SH Engine:
> Local time: Sun 2015-11-29 16:27:51 CET
> Universal time: Sun 2015-11-29 15:27:51 UTC
> RTC time: Sun 2015-11-29 15:27:50
> Timezone: Europe/Rome (CET, +0100)
> NTP enabled: yes
> NTP synchronized: yes
> RTC in local TZ: no
> DST active: no
> Last DST change: DST ended at
> Sun 2015-10-25 02:59:59 CEST
> Sun 2015-10-25 02:00:00 CET
> Next DST change: DST begins (the clock jumps one hour forward) at
> Sun 2016-03-27 01:59:59 CET
> Sun 2016-03-27 03:00:00 CEST
>
> Guest:
> # timedatectl status
> Local time: Sun 2015-11-29 16:28:07 CET
> Universal time: Sun 2015-11-29 15:28:07 UTC
> RTC time: Sun 2015-11-29 16:28:06
> Timezone: Europe/Rome (CET, +0100)
> NTP enabled: yes
> NTP synchronized: yes
> RTC in local TZ: no
> DST active: no
> Last DST change: DST ended at
> Sun 2015-10-25 02:59:59 CEST
> Sun 2015-10-25 02:00:00 CET
> Next DST change: DST begins (the clock jumps one hour forward) at
> Sun 2016-03-27 01:59:59 CET
> Sun 2016-03-27 03:00:00 CEST
>
>
> A strange thing with guest is that it seems it starts wrong because if
> current time is 16:25 I notice right after boot that I get both the "!"
> inside the GUI and wrong timestamp inside OS (1 hour ahead):
>
> # date
> Sun Nov 29 17:25:41 CET 2015
>
> # timedatectl status
> Local time: Sun 2015-11-29 17:25:46 CET
> Universal time: Sun 2015-11-29 16:25:46 UTC
> RTC time: Sun 2015-11-29 16:25:46
> Timezone: Europe/Rome (CET, +0100)
> NTP enabled: yes
> NTP synchronized: yes
> RTC in local TZ: no
> DST active: no
> Last DST change: DST ended at
> Sun 2015-10-25 02:59:59 CEST
> Sun 2015-10-25 02:00:00 CET
> Next DST change: DST begins (the clock jumps one hour forward) at
> Sun 2016-03-27 01:59:59 CET
> Sun 2016-03-27 03:00:00 CEST
>
>
> with apparently chronyd going to set time correctly detecting a huge step:
> # systemctl status chronyd -l
> chronyd.service - NTP client/server
> Loaded: loaded (/usr/lib/systemd/system/chronyd.service; enabled)
> Active: active (running) since Sun 2015-11-29 17:24:04 CET; 57min left
> Main PID: 1354 (chronyd)
> CGroup: /system.slice/chronyd.service
> └─1354 /usr/sbin/chronyd -u chrony
>
> Nov 29 17:24:04 racclient.inside.polimi.it systemd[1]: Starting NTP
> client/server...
> Nov 29 17:24:04 racclient.inside.polimi.it chronyd[1354]: chronyd version
> 1.29.1 starting
> Nov 29 17:24:04 racclient.inside.polimi.it chronyd[1354]: Linux kernel
> major=3 minor=10 patch=0
> Nov 29 17:24:04 racclient.inside.polimi.it chronyd[1354]: hz=100
> shift_hz=7 freq_scale=1.00000000 nominal_tick=10000 slew_delta_tick=833
> max_tick_bias=1000 shift_pll=2
> Nov 29 17:24:04 racclient.inside.polimi.it chronyd[1354]: Frequency
> -3.865 +/- 0.865 ppm read from /var/lib/chrony/drift
> Nov 29 17:24:04 racclient.inside.polimi.it systemd[1]: Started NTP
> client/server.
> Nov 29 17:26:14 racclient.inside.polimi.it chronyd[1354]: Selected source
> 131.175.12.3
> Nov 29 17:26:14 racclient.inside.polimi.it chronyd[1354]: System clock
> wrong by -3599.147583 seconds, adjustment started
> Nov 29 16:26:15 racclient.inside.polimi.it chronyd[1354]: System clock
> was stepped by -3599.148 seconds
>
> and after 1-2 minutes time is ok and I don't see any more the "!" in the
> ovirt admin gui
> # timedatectl status
> Local time: Sun 2015-11-29 16:27:09 CET
> Universal time: Sun 2015-11-29 15:27:09 UTC
> RTC time: Sun 2015-11-29 16:27:08
> Timezone: Europe/Rome (CET, +0100)
> NTP enabled: yes
> NTP synchronized: no
> RTC in local TZ: no
> DST active: no
> Last DST change: DST ended at
> Sun 2015-10-25 02:59:59 CEST
> Sun 2015-10-25 02:00:00 CET
> Next DST change: DST begins (the clock jumps one hour forward) at
> Sun 2016-03-27 01:59:59 CET
> Sun 2016-03-27 03:00:00 CEST
>
>
> but this walking ahead 1 hour right after boot seems still wrong to me.
> Donna if it is a problem with CentOS 7.1 itself or oVirt.
>
> Gianluca
>
--
Met vriendelijke groeten,
Paul Groeneweg
Pazion
Webdevelopment - Hosting - Apps
T +31 26 3020038
M +31 614 277 577
E paul at pazion.nl
***disclaimer***
"This e-mail and any attachments thereto may contain information which is
confidential and/or protected by intellectual property rights and are
intended for the sole use of the recipient(s) named above. Any use of the
information contained herein (including, but not limited to, total or
partial reproduction, communication or distribution in any form) by persons
other than the designated recipient(s) is prohibited. If you have received
this e-mail in error, please notify the sender either by telephone or by
e-mail and delete the material from any computer. Thank you for your
cooperation."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20151130/d52641ca/attachment-0001.html>
More information about the Users
mailing list