[ovirt-users] VLAN with one NIC
gregor
gregor_forum at catrix.at
Fri Sep 4 12:47:43 EDT 2015
Thanks, now I can use the eth0 to connect to the web-interface and the
logical vlan network to use in a VM but I can't use the untagged VLAN1
in the VM. When I add a new logical network without VLAN tagging the
web-interface returns "Cannot have more than one non-VLAN network on one
interface."
When I create a logical network with taggged ID 1 I can't connect from a
VM to my VLAN1.
So I have to find a way to created the following networks:
- ovirtmgmt: without tagged vlan for managing -> works
- vlan1: without tagged vlan for the VM's to connect to my default
network -> currently no solution
- vlan10: tagged vlan with id 10 -> works
cheers
gregor
On 2015-09-04 18:05, Chris Liebman wrote:
> You have to edit the ovirtgmt network and un-check the "VM Network" box:
>
> Inline image 1
>
> On Fri, Sep 4, 2015 at 8:47 AM, gregor <gregor_forum at catrix.at
> <mailto:gregor_forum at catrix.at>> wrote:
>
> Hi,
>
> is it possible to use different VLAN with one NIC in ovirt?
>
> I can not add a logical network configured as VLAN to my ovirtmgmt
> interface, I get "Cannot have a non-VLAN VM network and VLAN-tagged
> networks on one interface."
>
> The setup for the Port is a trunk of different tagged VLAN's and the
> default VLAN1 is untagged. Normally this work under centos where I give
> the nic eth0 an IP and create a nic eth0.10 for the VLAN with ID 10 and
> set an IP for it.
>
> cheers
> gregor
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org <mailto:Users at ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
>
>
More information about the Users
mailing list