[ovirt-users] can I use ovirt webmin UI create glusterfsvolumeand not use ovirtmgmt ip

Wed Apr 13 05:22:38 EDT 2016

My glusterfs peer use  a name but not hostname of server   like : 

[root at node44 ~]# gluster peer status
Number of Peers: 2

Hostname: node45.gluster.com
Uuid: 7c5a7103-97ad-4203-ab0f-8cd1cf38e836
State: Peer in Cluster (Connected)

Hostname: node93.gluster.com
Uuid: 1697b365-aeb5-4a18-9c6d-48a5b772d882
State: Peer in Cluster (Connected)

there hostnames are : 
node44.host.com
node45.host.com

node93.host.com

   OK , so the glusterfs peer must use ip ,no a name .  

------------------ Original ------------------
From:  "Sahina Bose"<sabose at redhat.com>;
Date:  Wed, Apr 13, 2016 05:36 PM
To:  "胡茂荣"<maorong.hu at horebdata.cn>; "users"<users at ovirt.org>; 

Subject:  Re: [ovirt-users] can I use ovirt webmin UI create glusterfsvolumeand not use ovirtmgmt ip

     On 04/13/2016 01:41 PM, 胡茂荣 wrote:

            Hi Sahina Bose :
               my /etc/hosts:
                           192.168.6.93 node93.gluster.com
           192.168.6.44 node44.gluster.com
           192.168.6.45 node45.gluster.com
           192.168.1.93 node93.host.com
           192.168.1.44 node44.host.com
           192.168.1.45 node45.host.com
           192.168.1.9  node9.engine.com

           and 192.168.1.X  is ovirtmgmt port ip  , 192.168.6.X is             gluster volume brick ip 

               I do           follow the 3 there steps , I create new volume , the volume           brick info is correctly( brick is my ovirt gluster port ip )           ,but I find , the glusterfs volume brick info （ip or           peer hostname ）show via webmin not correctly  when glusterfs           volume  created by command on host tty before ovirt-engine           deployment  

     Did you use the hostnames to identify the bricks when volume was     created from command line?

     Like I mentioned before - ovirt cannot identify multiple hostnames     for the server, so if the brick had been identified using the IP     address it will correctly identify on engine.
     The monitoring of brick will continue to work. Any management of     brick i.e - replace/remove will need to be done via command line.

             like ：
       the  hosted-engine volume brick (is 192.168.6.X port)           show error ,not 192.168.6.X 

           and  create new volume test , brick info is               correct:

                        ------------------ Original ------------------
                            From:  "Sahina                 Bose"<sabose at redhat.com>;
               Date:  Mon, Apr 11, 2016 10:22 PM
               To:  "胡茂荣"<maorong.hu at horebdata.cn>;                 "users"<users at ovirt.org>; 
               Subject:  Re: [ovirt-users] can I use ovirt                 webmin UI create glusterfs volumeand not use ovirtmgmt                 ip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160413/5072159d/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 9AB818F8 at C8373A14.DE0F0E57
Type: application/octet-stream
Size: 59925 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160413/5072159d/attachment-0002.obj>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 0367AF5C at 4740F561.DE0F0E57
Type: application/octet-stream
Size: 109631 bytes
Desc: not available
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160413/5072159d/attachment-0003.obj>