[ovirt-users] Hosted-engine-Issue
Budur Nagaraju
nbudoor at gmail.com
Fri Apr 22 04:27:36 EDT 2016
HI
I thought Its promiscuous mode issue ,after reboot of engine unable to
reach again ? is there anyways to resolve ?
Thanks,
Nagaraju
On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:
> I found the solution ,promiscuous mode was rejecting the packets this was
> causing the issue ,enabled and now able to ping without any issues.
> Thanks for the support !
>
> On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:
>
>> HI
>>
>> Any updates issue is blocking ?
>>
>> Thanks,
>> Nagaraju
>>
>>
>> On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor at gmail.com>
>> wrote:
>>
>>> Below are the details, unable to ping the gateway from the ovirt engine
>>> ,able to ping the ovirt engine from host as both are there in the same
>>> network.
>>>
>>>
>>> [root at oe ~]# ip addr
>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>> inet 127.0.0.1/8 scope host lo
>>> inet6 ::1/128 scope host
>>> valid_lft forever preferred_lft forever
>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>>> state UP qlen 1000
>>> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
>>> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
>>> inet6 fe80::216:3eff:fe33:38e5/64 scope link
>>> valid_lft forever preferred_lft forever
>>> [root at oe ~]#
>>> [root at oe ~]#
>>> [root at oe ~]#
>>> [root at oe ~]# ip route
>>> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9
>>> 169.254.0.0/16 dev eth0 scope link metric 1002
>>> default via 10.206.67.254 dev eth0
>>> [root at oe ~]#
>>> [root at oe ~]#
>>> [root at oe ~]#
>>> [root at oe ~]# brctl show
>>> bridge name bridge id STP enabled interfaces
>>> [root at oe ~]#
>>>
>>>
>>>
>>>
>>>
>>>
>>> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi at redhat.com>
>>> wrote:
>>>
>>>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor at gmail.com>
>>>> wrote:
>>>> > HI
>>>> >
>>>> > Installed hosted engine and after configuring IP to ovirt engine
>>>> unable to
>>>> > ping the gateway and found that there is no issue with the Network .
>>>>
>>>> You mean that from inside the engine machine, you cannot ping the
>>>> gateway?
>>>>
>>>> Can you ping it from the host?
>>>>
>>>> Please share output of these commands, from both the host and the
>>>> engine vm:
>>>>
>>>> ip addr
>>>> ip route
>>>> brctl show
>>>>
>>>> Thanks,
>>>>
>>>> >
>>>> > Is there any thing am missing while installing Hosted engine ? below
>>>> is
>>>> > output details,
>>>> >
>>>> >
>>>> > --== CONFIGURATION PREVIEW ==--
>>>> >
>>>> > Engine FQDN : oe.bnglab.psecure.net
>>>> > Bridge name : ovirtmgmt
>>>> > SSH daemon port : 22
>>>> > Gateway address : 10.206.67.254
>>>> > Host name for web application : hosted_engine_1
>>>> > Host ID : 1
>>>> > Image alias : hosted_engine
>>>> > Image size GB : 25
>>>> > Storage connection : 10.204.207.152:
>>>> /home/heoe
>>>> > Console type : vnc
>>>> > Memory size MB : 4096
>>>> > MAC address : 00:16:3e:2f:5c:40
>>>> > Boot type : cdrom
>>>> > Number of CPUs : 2
>>>> > ISO image (for cdrom boot) :
>>>> > /ovirt/CentOS-6.7-x86_64-minimal.iso
>>>> > CPU Type : model_SandyBridge
>>>> >
>>>> > Please confirm installation settings (Yes, No)[Yes]: yes
>>>> > [ INFO ] Stage: Transaction setup
>>>> > [ INFO ] Stage: Misc configuration
>>>> > [ INFO ] Stage: Package installation
>>>> > [ INFO ] Stage: Misc configuration
>>>> > [ INFO ] Configuring libvirt
>>>> > [ INFO ] Configuring VDSM
>>>> > [ INFO ] Starting vdsmd
>>>> > [ INFO ] Waiting for VDSM hardware info
>>>> > [ INFO ] Waiting for VDSM hardware info
>>>> > [ INFO ] Creating Storage Domain
>>>> > [ INFO ] Creating Storage Pool
>>>> > [ INFO ] Connecting Storage Pool
>>>> > [ INFO ] Verifying sanlock lockspace initialization
>>>> > [ INFO ] Creating VM Image
>>>> > [ INFO ] Disconnecting Storage Pool
>>>> > [ INFO ] Start monitoring domain
>>>> > [ INFO ] Configuring VM
>>>> > [ INFO ] Updating hosted-engine configuration
>>>> > [ INFO ] Stage: Transaction commit
>>>> > [ INFO ] Stage: Closing up
>>>> > The following network ports should be opened:
>>>> > tcp:5900
>>>> > tcp:5901
>>>> > udp:5900
>>>> > udp:5901
>>>> > An example of the required configuration for iptables can
>>>> be found
>>>> > at:
>>>> > /etc/ovirt-hosted-engine/iptables.example
>>>> > In order to configure firewalld, copy the files from
>>>> > /etc/ovirt-hosted-engine/firewalld to
>>>> /etc/firewalld/services
>>>> > and execute the following commands:
>>>> > firewall-cmd -service hosted-console
>>>> > [ INFO ] Creating VM
>>>> > You can now connect to the VM with the following command:
>>>> > /usr/bin/remote-viewer vnc://localhost:5900
>>>> > Use temporary password "2049ZfXr" to connect to vnc console.
>>>> > Please note that in order to use remote-viewer you need to
>>>> be able
>>>> > to run graphical applications.
>>>> > This means that if you are using ssh you have to supply the
>>>> -Y
>>>> > flag (enables trusted X11 forwarding).
>>>> > Otherwise you can run the command from a terminal in your
>>>> > preferred desktop environment.
>>>> > If you cannot run graphical applications you can connect to
>>>> the
>>>> > graphic console from another host or connect to the console using the
>>>> > following command:
>>>> > virsh -c qemu+tls://Test/system console HostedEngine
>>>> > If you need to reboot the VM you will need to start it
>>>> manually
>>>> > using the command:
>>>> > hosted-engine --vm-start
>>>> > You can then set a temporary password using the command:
>>>> > hosted-engine --add-console-password
>>>> > The VM has been started. Install the OS and shut down or
>>>> reboot
>>>> > it. To continue please make a selection:
>>>> >
>>>> > (1) Continue setup - VM installation is complete
>>>> > (2) Reboot the VM and restart installation
>>>> > (3) Abort setup
>>>> > (4) Destroy VM and abort setup
>>>> >
>>>> > _______________________________________________
>>>> > Users mailing list
>>>> > Users at ovirt.org
>>>> > http://lists.ovirt.org/mailman/listinfo/users
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>> Didi
>>>>
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160422/55ce21c4/attachment-0001.html>
More information about the Users
mailing list