[ovirt-users] Hosted-engine-Issue
Simone Tiraboschi
stirabos at redhat.com
Fri Apr 22 06:08:13 EDT 2016
On Fri, Apr 22, 2016 at 10:27 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:
> HI
>
> I thought Its promiscuous mode issue ,after reboot of engine unable to reach
> again ? is there anyways to resolve ?
Are you using a nested env?
> Thanks,
> Nagaraju
>
>
> On Fri, Apr 22, 2016 at 11:45 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:
>>
>> I found the solution ,promiscuous mode was rejecting the packets this was
>> causing the issue ,enabled and now able to ping without any issues.
>> Thanks for the support !
>>
>> On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:
>>>
>>> HI
>>>
>>> Any updates issue is blocking ?
>>>
>>> Thanks,
>>> Nagaraju
>>>
>>>
>>> On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor at gmail.com>
>>> wrote:
>>>>
>>>> Below are the details, unable to ping the gateway from the ovirt engine
>>>> ,able to ping the ovirt engine from host as both are there in the same
>>>> network.
>>>>
>>>>
>>>> [root at oe ~]# ip addr
>>>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>>>> link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>>> inet 127.0.0.1/8 scope host lo
>>>> inet6 ::1/128 scope host
>>>> valid_lft forever preferred_lft forever
>>>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>>>> state UP qlen 1000
>>>> link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
>>>> inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
>>>> inet6 fe80::216:3eff:fe33:38e5/64 scope link
>>>> valid_lft forever preferred_lft forever
>>>> [root at oe ~]#
>>>> [root at oe ~]#
>>>> [root at oe ~]#
>>>> [root at oe ~]# ip route
>>>> 10.206.66.0/23 dev eth0 proto kernel scope link src 10.206.66.9
>>>> 169.254.0.0/16 dev eth0 scope link metric 1002
>>>> default via 10.206.67.254 dev eth0
>>>> [root at oe ~]#
>>>> [root at oe ~]#
>>>> [root at oe ~]#
>>>> [root at oe ~]# brctl show
>>>> bridge name bridge id STP enabled interfaces
>>>> [root at oe ~]#
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi at redhat.com>
>>>> wrote:
>>>>>
>>>>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor at gmail.com>
>>>>> wrote:
>>>>> > HI
>>>>> >
>>>>> > Installed hosted engine and after configuring IP to ovirt engine
>>>>> > unable to
>>>>> > ping the gateway and found that there is no issue with the Network .
>>>>>
>>>>> You mean that from inside the engine machine, you cannot ping the
>>>>> gateway?
>>>>>
>>>>> Can you ping it from the host?
>>>>>
>>>>> Please share output of these commands, from both the host and the
>>>>> engine vm:
>>>>>
>>>>> ip addr
>>>>> ip route
>>>>> brctl show
>>>>>
>>>>> Thanks,
>>>>>
>>>>> >
>>>>> > Is there any thing am missing while installing Hosted engine ? below
>>>>> > is
>>>>> > output details,
>>>>> >
>>>>> >
>>>>> > --== CONFIGURATION PREVIEW ==--
>>>>> >
>>>>> > Engine FQDN : oe.bnglab.psecure.net
>>>>> > Bridge name : ovirtmgmt
>>>>> > SSH daemon port : 22
>>>>> > Gateway address : 10.206.67.254
>>>>> > Host name for web application : hosted_engine_1
>>>>> > Host ID : 1
>>>>> > Image alias : hosted_engine
>>>>> > Image size GB : 25
>>>>> > Storage connection :
>>>>> > 10.204.207.152:/home/heoe
>>>>> > Console type : vnc
>>>>> > Memory size MB : 4096
>>>>> > MAC address : 00:16:3e:2f:5c:40
>>>>> > Boot type : cdrom
>>>>> > Number of CPUs : 2
>>>>> > ISO image (for cdrom boot) :
>>>>> > /ovirt/CentOS-6.7-x86_64-minimal.iso
>>>>> > CPU Type : model_SandyBridge
>>>>> >
>>>>> > Please confirm installation settings (Yes, No)[Yes]: yes
>>>>> > [ INFO ] Stage: Transaction setup
>>>>> > [ INFO ] Stage: Misc configuration
>>>>> > [ INFO ] Stage: Package installation
>>>>> > [ INFO ] Stage: Misc configuration
>>>>> > [ INFO ] Configuring libvirt
>>>>> > [ INFO ] Configuring VDSM
>>>>> > [ INFO ] Starting vdsmd
>>>>> > [ INFO ] Waiting for VDSM hardware info
>>>>> > [ INFO ] Waiting for VDSM hardware info
>>>>> > [ INFO ] Creating Storage Domain
>>>>> > [ INFO ] Creating Storage Pool
>>>>> > [ INFO ] Connecting Storage Pool
>>>>> > [ INFO ] Verifying sanlock lockspace initialization
>>>>> > [ INFO ] Creating VM Image
>>>>> > [ INFO ] Disconnecting Storage Pool
>>>>> > [ INFO ] Start monitoring domain
>>>>> > [ INFO ] Configuring VM
>>>>> > [ INFO ] Updating hosted-engine configuration
>>>>> > [ INFO ] Stage: Transaction commit
>>>>> > [ INFO ] Stage: Closing up
>>>>> > The following network ports should be opened:
>>>>> > tcp:5900
>>>>> > tcp:5901
>>>>> > udp:5900
>>>>> > udp:5901
>>>>> > An example of the required configuration for iptables can
>>>>> > be found
>>>>> > at:
>>>>> > /etc/ovirt-hosted-engine/iptables.example
>>>>> > In order to configure firewalld, copy the files from
>>>>> > /etc/ovirt-hosted-engine/firewalld to
>>>>> > /etc/firewalld/services
>>>>> > and execute the following commands:
>>>>> > firewall-cmd -service hosted-console
>>>>> > [ INFO ] Creating VM
>>>>> > You can now connect to the VM with the following command:
>>>>> > /usr/bin/remote-viewer vnc://localhost:5900
>>>>> > Use temporary password "2049ZfXr" to connect to vnc
>>>>> > console.
>>>>> > Please note that in order to use remote-viewer you need to
>>>>> > be able
>>>>> > to run graphical applications.
>>>>> > This means that if you are using ssh you have to supply the
>>>>> > -Y
>>>>> > flag (enables trusted X11 forwarding).
>>>>> > Otherwise you can run the command from a terminal in your
>>>>> > preferred desktop environment.
>>>>> > If you cannot run graphical applications you can connect to
>>>>> > the
>>>>> > graphic console from another host or connect to the console using the
>>>>> > following command:
>>>>> > virsh -c qemu+tls://Test/system console HostedEngine
>>>>> > If you need to reboot the VM you will need to start it
>>>>> > manually
>>>>> > using the command:
>>>>> > hosted-engine --vm-start
>>>>> > You can then set a temporary password using the command:
>>>>> > hosted-engine --add-console-password
>>>>> > The VM has been started. Install the OS and shut down or
>>>>> > reboot
>>>>> > it. To continue please make a selection:
>>>>> >
>>>>> > (1) Continue setup - VM installation is complete
>>>>> > (2) Reboot the VM and restart installation
>>>>> > (3) Abort setup
>>>>> > (4) Destroy VM and abort setup
>>>>> >
>>>>> > _______________________________________________
>>>>> > Users mailing list
>>>>> > Users at ovirt.org
>>>>> > http://lists.ovirt.org/mailman/listinfo/users
>>>>> >
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Didi
>>>>
>>>>
>>>
>>
>
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
More information about the Users
mailing list