[ovirt-users] Hosted-engine-Issue

[Budur Nagaraju]

Below are the  details, unable to ping the gateway from the ovirt engine
,able to ping the ovirt engine from host as both are there in the same
network.


[root at oe ~]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
    link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
    inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
    inet6 fe80::216:3eff:fe33:38e5/64 scope link
       valid_lft forever preferred_lft forever
[root at oe ~]#
[root at oe ~]#
[root at oe ~]#
[root at oe ~]# ip route
10.206.66.0/23 dev eth0  proto kernel  scope link  src 10.206.66.9
169.254.0.0/16 dev eth0  scope link  metric 1002
default via 10.206.67.254 dev eth0
[root at oe ~]#
[root at oe ~]#
[root at oe ~]#
[root at oe ~]# brctl show
bridge name     bridge id               STP enabled     interfaces
[root at oe ~]#






On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi at redhat.com> wrote:

> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor at gmail.com> wrote:
> > HI
> >
> > Installed hosted engine and  after configuring  IP to ovirt engine
> unable to
> > ping the gateway and found that there is no issue with the Network .
>
> You mean that from inside the engine machine, you cannot ping the gateway?
>
> Can you ping it from the host?
>
> Please share output of these commands, from both the host and the engine
> vm:
>
> ip addr
> ip route
> brctl show
>
> Thanks,
>
> >
> > Is there any thing am missing  while installing Hosted engine ? below is
> > output details,
> >
> >
> > --== CONFIGURATION PREVIEW ==--
> >
> >           Engine FQDN                        : oe.bnglab.psecure.net
> >           Bridge name                        : ovirtmgmt
> >           SSH daemon port                    : 22
> >           Gateway address                    : 10.206.67.254
> >           Host name for web application      : hosted_engine_1
> >           Host ID                            : 1
> >           Image alias                        : hosted_engine
> >           Image size GB                      : 25
> >           Storage connection                 : 10.204.207.152:/home/heoe
> >           Console type                       : vnc
> >           Memory size MB                     : 4096
> >           MAC address                        : 00:16:3e:2f:5c:40
> >           Boot type                          : cdrom
> >           Number of CPUs                     : 2
> >           ISO image (for cdrom boot)         :
> > /ovirt/CentOS-6.7-x86_64-minimal.iso
> >           CPU Type                           : model_SandyBridge
> >
> >           Please confirm installation settings (Yes, No)[Yes]: yes
> > [ INFO  ] Stage: Transaction setup
> > [ INFO  ] Stage: Misc configuration
> > [ INFO  ] Stage: Package installation
> > [ INFO  ] Stage: Misc configuration
> > [ INFO  ] Configuring libvirt
> > [ INFO  ] Configuring VDSM
> > [ INFO  ] Starting vdsmd
> > [ INFO  ] Waiting for VDSM hardware info
> > [ INFO  ] Waiting for VDSM hardware info
> > [ INFO  ] Creating Storage Domain
> > [ INFO  ] Creating Storage Pool
> > [ INFO  ] Connecting Storage Pool
> > [ INFO  ] Verifying sanlock lockspace initialization
> > [ INFO  ] Creating VM Image
> > [ INFO  ] Disconnecting Storage Pool
> > [ INFO  ] Start monitoring domain
> > [ INFO  ] Configuring VM
> > [ INFO  ] Updating hosted-engine configuration
> > [ INFO  ] Stage: Transaction commit
> > [ INFO  ] Stage: Closing up
> >           The following network ports should be opened:
> >               tcp:5900
> >               tcp:5901
> >               udp:5900
> >               udp:5901
> >           An example of the required configuration for iptables can be
> found
> > at:
> >               /etc/ovirt-hosted-engine/iptables.example
> >           In order to configure firewalld, copy the files from
> >           /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
> >           and execute the following commands:
> >               firewall-cmd -service hosted-console
> > [ INFO  ] Creating VM
> >           You can now connect to the VM with the following command:
> >                 /usr/bin/remote-viewer vnc://localhost:5900
> >           Use temporary password "2049ZfXr" to connect to vnc console.
> >           Please note that in order to use remote-viewer you need to be
> able
> > to run graphical applications.
> >           This means that if you are using ssh you have to supply the -Y
> > flag (enables trusted X11 forwarding).
> >           Otherwise you can run the command from a terminal in your
> > preferred desktop environment.
> >           If you cannot run graphical applications you can connect to the
> > graphic console from another host or connect to the console using the
> > following command:
> >           virsh -c qemu+tls://Test/system console HostedEngine
> >           If you need to reboot the VM you will need to start it manually
> > using the command:
> >           hosted-engine --vm-start
> >           You can then set a temporary password using the command:
> >           hosted-engine --add-console-password
> >           The VM has been started.  Install the OS and shut down or
> reboot
> > it.  To continue please make a selection:
> >
> >           (1) Continue setup - VM installation is complete
> >           (2) Reboot the VM and restart installation
> >           (3) Abort setup
> >           (4) Destroy VM and abort setup
> >
> > _______________________________________________
> > Users mailing list
> > Users at ovirt.org
> > http://lists.ovirt.org/mailman/listinfo/users
> >
>
>
>
> --
> Didi
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160421/7c51fc7f/attachment-0001.html>