[ovirt-users] Hosted-engine-Issue

Budur Nagaraju nbudoor at gmail.com
Fri Apr 22 06:15:27 UTC 2016


I found the solution ,promiscuous mode was rejecting the packets this was
causing the issue ,enabled and now able to ping without any issues.
Thanks for the support !

On Fri, Apr 22, 2016 at 8:39 AM, Budur Nagaraju <nbudoor at gmail.com> wrote:

> HI
>
> Any updates issue is blocking ?
>
> Thanks,
> Nagaraju
>
>
> On Thu, Apr 21, 2016 at 7:20 PM, Budur Nagaraju <nbudoor at gmail.com> wrote:
>
>> Below are the  details, unable to ping the gateway from the ovirt engine
>> ,able to ping the ovirt engine from host as both are there in the same
>> network.
>>
>>
>> [root at oe ~]# ip addr
>> 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
>>     link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
>>     inet 127.0.0.1/8 scope host lo
>>     inet6 ::1/128 scope host
>>        valid_lft forever preferred_lft forever
>> 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
>> state UP qlen 1000
>>     link/ether 00:16:3e:33:38:e5 brd ff:ff:ff:ff:ff:ff
>>     inet 10.206.66.9/23 brd 10.206.67.255 scope global eth0
>>     inet6 fe80::216:3eff:fe33:38e5/64 scope link
>>        valid_lft forever preferred_lft forever
>> [root at oe ~]#
>> [root at oe ~]#
>> [root at oe ~]#
>> [root at oe ~]# ip route
>> 10.206.66.0/23 dev eth0  proto kernel  scope link  src 10.206.66.9
>> 169.254.0.0/16 dev eth0  scope link  metric 1002
>> default via 10.206.67.254 dev eth0
>> [root at oe ~]#
>> [root at oe ~]#
>> [root at oe ~]#
>> [root at oe ~]# brctl show
>> bridge name     bridge id               STP enabled     interfaces
>> [root at oe ~]#
>>
>>
>>
>>
>>
>>
>> On Thu, Apr 21, 2016 at 4:51 PM, Yedidyah Bar David <didi at redhat.com>
>> wrote:
>>
>>> On Thu, Apr 21, 2016 at 1:39 PM, Budur Nagaraju <nbudoor at gmail.com>
>>> wrote:
>>> > HI
>>> >
>>> > Installed hosted engine and  after configuring  IP to ovirt engine
>>> unable to
>>> > ping the gateway and found that there is no issue with the Network .
>>>
>>> You mean that from inside the engine machine, you cannot ping the
>>> gateway?
>>>
>>> Can you ping it from the host?
>>>
>>> Please share output of these commands, from both the host and the engine
>>> vm:
>>>
>>> ip addr
>>> ip route
>>> brctl show
>>>
>>> Thanks,
>>>
>>> >
>>> > Is there any thing am missing  while installing Hosted engine ? below
>>> is
>>> > output details,
>>> >
>>> >
>>> > --== CONFIGURATION PREVIEW ==--
>>> >
>>> >           Engine FQDN                        : oe.bnglab.psecure.net
>>> >           Bridge name                        : ovirtmgmt
>>> >           SSH daemon port                    : 22
>>> >           Gateway address                    : 10.206.67.254
>>> >           Host name for web application      : hosted_engine_1
>>> >           Host ID                            : 1
>>> >           Image alias                        : hosted_engine
>>> >           Image size GB                      : 25
>>> >           Storage connection                 : 10.204.207.152:
>>> /home/heoe
>>> >           Console type                       : vnc
>>> >           Memory size MB                     : 4096
>>> >           MAC address                        : 00:16:3e:2f:5c:40
>>> >           Boot type                          : cdrom
>>> >           Number of CPUs                     : 2
>>> >           ISO image (for cdrom boot)         :
>>> > /ovirt/CentOS-6.7-x86_64-minimal.iso
>>> >           CPU Type                           : model_SandyBridge
>>> >
>>> >           Please confirm installation settings (Yes, No)[Yes]: yes
>>> > [ INFO  ] Stage: Transaction setup
>>> > [ INFO  ] Stage: Misc configuration
>>> > [ INFO  ] Stage: Package installation
>>> > [ INFO  ] Stage: Misc configuration
>>> > [ INFO  ] Configuring libvirt
>>> > [ INFO  ] Configuring VDSM
>>> > [ INFO  ] Starting vdsmd
>>> > [ INFO  ] Waiting for VDSM hardware info
>>> > [ INFO  ] Waiting for VDSM hardware info
>>> > [ INFO  ] Creating Storage Domain
>>> > [ INFO  ] Creating Storage Pool
>>> > [ INFO  ] Connecting Storage Pool
>>> > [ INFO  ] Verifying sanlock lockspace initialization
>>> > [ INFO  ] Creating VM Image
>>> > [ INFO  ] Disconnecting Storage Pool
>>> > [ INFO  ] Start monitoring domain
>>> > [ INFO  ] Configuring VM
>>> > [ INFO  ] Updating hosted-engine configuration
>>> > [ INFO  ] Stage: Transaction commit
>>> > [ INFO  ] Stage: Closing up
>>> >           The following network ports should be opened:
>>> >               tcp:5900
>>> >               tcp:5901
>>> >               udp:5900
>>> >               udp:5901
>>> >           An example of the required configuration for iptables can be
>>> found
>>> > at:
>>> >               /etc/ovirt-hosted-engine/iptables.example
>>> >           In order to configure firewalld, copy the files from
>>> >           /etc/ovirt-hosted-engine/firewalld to /etc/firewalld/services
>>> >           and execute the following commands:
>>> >               firewall-cmd -service hosted-console
>>> > [ INFO  ] Creating VM
>>> >           You can now connect to the VM with the following command:
>>> >                 /usr/bin/remote-viewer vnc://localhost:5900
>>> >           Use temporary password "2049ZfXr" to connect to vnc console.
>>> >           Please note that in order to use remote-viewer you need to
>>> be able
>>> > to run graphical applications.
>>> >           This means that if you are using ssh you have to supply the
>>> -Y
>>> > flag (enables trusted X11 forwarding).
>>> >           Otherwise you can run the command from a terminal in your
>>> > preferred desktop environment.
>>> >           If you cannot run graphical applications you can connect to
>>> the
>>> > graphic console from another host or connect to the console using the
>>> > following command:
>>> >           virsh -c qemu+tls://Test/system console HostedEngine
>>> >           If you need to reboot the VM you will need to start it
>>> manually
>>> > using the command:
>>> >           hosted-engine --vm-start
>>> >           You can then set a temporary password using the command:
>>> >           hosted-engine --add-console-password
>>> >           The VM has been started.  Install the OS and shut down or
>>> reboot
>>> > it.  To continue please make a selection:
>>> >
>>> >           (1) Continue setup - VM installation is complete
>>> >           (2) Reboot the VM and restart installation
>>> >           (3) Abort setup
>>> >           (4) Destroy VM and abort setup
>>> >
>>> > _______________________________________________
>>> > Users mailing list
>>> > Users at ovirt.org
>>> > http://lists.ovirt.org/mailman/listinfo/users
>>> >
>>>
>>>
>>>
>>> --
>>> Didi
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160422/a47c6271/attachment-0001.html>


More information about the Users mailing list