[ovirt-users] Dedicated NICs for gluster network

[Sahina Bose]

On Fri, Aug 19, 2016 at 12:29 PM, Nicolas Ecarnot <nicolas at ecarnot.net>
wrote:

> Hello,
>
> I'm digging out this thread because I now had the time to work on this
> subject, and I'm stuck.
>
> This oVirt setup has a standalone engine, and 3 hosts.
> These 3 hosts are hypervisors and gluster nodes, each using one NIC for
> all the traffic, that is a very bad idea. (Well, it's working, but not
> recommended).
>
> I added 3 OTHER nodes, and so far, I only created the gluster setup and
> created a replica-3 volume.
> Each of these new nodes now have one NIC for management, one NIC for
> gluster, and other NICs for other things.
> Each NIC has an IP + DNS name in its dedicated VLAN : one for mgmt and one
> for gluster.
> The mgmt subnet is routed, though the gluster subnet is not.
> Every node can ping each other, either using the mgmt or the gluster
> subnets.
>
> The creation of the gluster subnet and volume went very well and seems to
> be perfect.
>
> Now, in the oVirt web gui, I'm trying to add these nodes as oVirt hosts.
> I'm using their mgmt DNS names, and I'm getting :
> "Error while executing action: Server xxxxxxxx is already part of another
> cluster."
>

Did you peer probe the gluster cluster prior to adding the nodes to oVirt?
What's the output of "gluster peer status"

If I understand correctly:
node1 - mgmt.ip.1 & gluster.ip.1
node2 - mgmt.ip.2 & gluster.ip.2
node3 - mgmt.ip.3 & gluster.ip.3

Did you create a network and assign "gluster" role to it in the cluster?
Were you able to add the first node to cluster, and got this error on
second node addition ?
>From the error, it looks like oVirt does not understand the peer list
returned from gluster is a match with node being added.
Please provide the log snippet of the failure (from engine.log as well as
vdsm.log on node)



> I found no idea when googling, except something related to gluster (you
> bet!), telling this may be related to the fact that there is already a
> volume, managed with a different name.
>
> Obviously, using a different name and IP is what I needed!
> I used "transport.socket.bind-address" to make sure the gluster traffic
> will only use the dedicated NICs.
>
>
> Well, I also tried to created a storage domain relying on the freshly
> created gluster volume, but as this subnet is not routed, it is not
> reachable from the manager nor the existing SPM.
>

The existing SPM - isn't it one of the the 3 new nodes being added? Or are
you adding the 3 nodes to your existing cluster? If so, I suggest you try
adding this to a new cluster


>
>
> I'm feeling I'm missing something here, so your help is warmly welcome.
>
>
> Nicolas ECARNOT
>
> PS : CentOS 7.2 everywhere, oVirt 3.6.7
>
>
> Le 27/11/2015 à 20:00, Ivan Bulatovic a écrit :
>
>> Hi Nicolas,
>>
>> what works for me in 3.6 is creating a new network for gluster within
>> oVirt, marking it for gluster use only, optionally setting bonded
>> interface upon NIC's that are dedicated for gluster traffic and
>> providing it with an IP address without configuring a gateway, and then
>> modifying /etc/hosts so that hostnames are resolvable between nodes.
>> Every node should have two hostnames, one for ovirtmgmt network that is
>> resolvable via DNS (or via /etc/hosts), and the other for gluster
>> network that is resolvable purely via /etc/hosts (every node should
>> contain entries for themselves and for each gluster node).
>>
>> Peers should be probed via their gluster hostnames, while ensuring that
>> gluster peer status contains only addresses and hostnames that are
>> dedicated for gluster on each node. Same goes for adding bricks,
>> creating a volume etc.
>>
>> This way, no communication (except gluster one) should be allowed
>> through gluster dedicated vlan. To be on the safe side, we can also
>> force gluster to listen only on dedicated interfaces via
>> transport.socket.bind-address option (haven't tried this one, will do).
>>
>> Separation of gluster (or in the future any storage network), live
>> migration network, vm and management network is always a good thing.
>> Perhaps, we could manage failover of those networks within oVirt, ie. in
>> case lm network is down - use gluster network for lm and vice versa.
>> Cool candidate for an RFE, but first we need this supported within
>> gluster itself. This may prove useful when there is not enough NIC's
>> available to do a bond beneath every defined network. But we can still
>> separate traffic and provide failover by selecting multiple networks
>> without actually doing any load balancing between the two.
>>
>> As Nathanaël mentioned, marking network for gluster use is only
>> available in 3.6. I'm also interested if there is a better way around
>> this procedure, or perharps enhancing it.
>>
>> Kind regards,
>>
>> Ivan
>>
>> On 11/27/2015 05:47 PM, Nathanaël Blanchet wrote:
>>
>>> Hello Nicolas,
>>>
>>> Did you have a look to this :
>>> http://www.ovirt.org/Features/Select_Network_For_Gluster ?
>>> But it is only available from >=3.6...
>>>
>>> Le 27/11/2015 17:02, Nicolas Ecarnot a écrit :
>>>
>>>> Hello,
>>>>
>>>> [Here : oVirt 3.5.3, 3 x CentOS 7.0 hosts with replica-3 gluster SD
>>>> on the hosts].
>>>>
>>>> On the switchs, I have created a dedicated VLAN to isolate the
>>>> glusterFS traffic, but I'm not using it yet.
>>>> I was thinking of creating a dedicated IP for each node's gluster
>>>> NIC, and a DNS record by the way ("my_nodes_name_GL"), but I fear
>>>> using this hostname or this ip in oVirt GUI host network interface
>>>> tab, leading oVirt think this is a different host.
>>>>
>>>> Not being sure this fear is clearly described, let's say :
>>>> - On each node, I create a second ip+(dns record in the soa) used by
>>>> gluster, plugged on the correct VLAN
>>>> - in oVirt gui, in the host network setting tab, the interface will
>>>> be seen, with its ip, but reverse-dns-related to a different hostname.
>>>> Here, I fear oVirt might check this reverse DNS and declare this NIC
>>>> belongs to another host.
>>>>
>>>> I would also prefer not use a reverse pointing to the name of the
>>>> host management ip, as this is evil and I'm a good guy.
>>>>
>>>> On your side, how do you cope with a dedicated storage network in
>>>> case of storage+compute mixed hosts?
>>>>
>>>>
>>>
>>
>
> --
> Nicolas ECARNOT
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org
> http://lists.ovirt.org/mailman/listinfo/users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160819/62f284d8/attachment.html>