[ovirt-users] 3.6 : Hosted engine High Availability

Alexis HAUSER alexis.hauser at telecom-bretagne.eu
Thu Aug 25 09:19:14 UTC 2016


>No, it's not: you have to point to the same storage server you used
>for the first host, hosted-engine-setup will detect the existing
>installation and it will ask if you are going to add an additional
>host.
>At that point it will consume the answer file saved on the shared storage.


This is exactly what I've done but it stills asks me those question about FQDN, hostname and password, and as we can see it seems to find the answer file :







hosted-engine --deploy
[ INFO  ] Stage: Initializing
[ INFO  ] Generating a temporary VNC password.
[ INFO  ] Stage: Environment setup
          Continuing will configure this host for serving as hypervisor and create a VM where you have to install the engine afterwards.
          Are you sure you want to continue? (Yes, No)[Yes]: 
          Configuration files: []
          Log file: /var/log/ovirt-hosted-engine-setup/ovirt-hosted-engine-setup-20160825082809-4evynk.log
          Version: otopi-1.4.2 (otopi-1.4.2-1.el7ev)
          It has been detected that this program is executed through an SSH connection without using screen.
          Continuing with the installation may lead to broken installation if the network connection fails.
          It is highly recommended to abort the installation and run it inside a screen session using command "screen".
          Do you want to continue anyway? (Yes, No)[No]: yes
[ INFO  ] Hardware supports virtualization
[ INFO  ] Bridge ovirtmgmt already created
[ INFO  ] Stage: Environment packages setup
[ INFO  ] Stage: Programs detection
[ INFO  ] Stage: Environment setup
[ INFO  ] Stage: Environment customization
         
          --== STORAGE CONFIGURATION ==--
         
          During customization use CTRL-D to abort.
          Please specify the storage you would like to use (glusterfs, iscsi, fc, nfs3, nfs4)[nfs3]: iscsi
          Please specify the iSCSI portal IP address: x.x.x.x
          Please specify the iSCSI portal port [3260]: 
          Please specify the iSCSI portal user: 
          Please specify the target name (iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx, iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) [iqn.1984-05.com.dell:powervault.xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx]: 
          The following luns have been found on the requested target:
          	[1]	36002219000897d5e000025bd5754b30f	836GiB	DELL	MD3000i
          		status: used, paths: 1 active
         
          	[2]	36002219000897d5e00002ea457a406f7	100GiB	DELL	MD3000i
          		status: used, paths: 1 active
         
          	[3]	36002219000897d5e00002e5357980305	150GiB	DELL	MD3000i
          		status: free, paths: 1 active
         
          	[4]	36002219000897d5e00002fa357ad109e	500GiB	DELL	MD3000i
          		status: free, paths: 1 active
         
          	[5]	36002219000897d5e00002fa857ad11c2	80GiB	DELL	MD3000i
          		status: free, paths: 1 active
         
          	[6]	36002219000897d5e00002f1657a920a2	587GiB	DELL	MD3000i
          		status: used, paths: 1 active
         
          Please select the destination LUN (1, 2, 3, 4, 5, 6) [1]: 2
          The specified storage location already contains a data domain. Is this an additional host setup (Yes, No)[Yes]? 
[ INFO  ] Installing on additional host
          Please specify the Host ID [Must be integer, default: 2]: 
         
          --== SYSTEM CONFIGURATION ==--
         
[WARNING] A configuration file must be supplied to deploy Hosted Engine on an additional host.
[ INFO  ] Answer file successfully loaded
         
          --== NETWORK CONFIGURATION ==--
         
[ INFO  ] Additional host deployment, firewall manager is 'iptables'
          The following CPU types are supported by this host:
          	 - model_Haswell-noTSX: Intel Haswell-noTSX Family
          	 - model_SandyBridge: Intel SandyBridge Family
          	 - model_Westmere: Intel Westmere Family
          	 - model_Nehalem: Intel Nehalem Family
          	 - model_Penryn: Intel Penryn Family
          	 - model_Conroe: Intel Conroe Family
         
          --== HOSTED ENGINE CONFIGURATION ==--
         
          Enter the name which will be used to identify this host inside the Administrator Portal [hosted_engine_2]: 
          Enter 'admin at internal' user password that will be used for accessing the Administrator Portal: 
          Confirm 'admin at internal' user password: 
[ INFO  ] Stage: Setup validation
[WARNING] Cannot validate host name settings, reason: resolved host does not match any of the local addresses
          Please provide the address of this host.
          Note: The engine VM and all the other hosts should be able to correctly resolve it.
          Host address:  [localhost.localdomain]:



More information about the Users mailing list