[ovirt-users] Stable Next Generation Node Image for 4.0.2?

Grundmann, Christian Christian.Grundmann at fabasoft.com
Wed Aug 31 10:18:02 UTC 2016


Hi,

node not updated:
rpm -qa |grep ovirt-release
ovirt-release40-4.0.2-2.noarch
ovirt-release-host-node-4.0.2-2.el7.noarch

grep -ri enabled /etc/yum.repos.d/ovirt-4.0*
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0.repo:enabled=1


yum check-update
Loaded plugins: fastestmirror, imgbased-warning
Warning: yum operations are not persisted across upgrades!
Loading mirror speeds from cached hostfile
* ovirt-4.0: ftp.nluug.nl
* ovirt-4.0-epel: epel.besthosting.ua
Obsoleting Packages
ovirt-node-ng-image-update.noarch                     4.0.3-1.el7      ovirt-4.0
    ovirt-node-ng-image-update-placeholder.noarch     4.0.1-1.el7      installed


node updated over engine:
rpm -qa |grep ovirt-release
ovirt-release40-pre-4.0.1-1.noarch
ovirt-release-host-node-4.0.1-1.el7.noarch

  grep -ri enabled /etc/yum.repos.d/ovirt-4.0*
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-dependencies.repo:enabled=1
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre-dependencies.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0-pre.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0-pre.repo:enabled=0
/etc/yum.repos.d/ovirt-4.0.repo:# imgbased: set-enabled
/etc/yum.repos.d/ovirt-4.0.repo:enabled=1


yum check-update
Loaded plugins: fastestmirror, imgbased-warning
Warning: yum operations are not persisted across upgrades!
Repository ovirt-4.0-epel is listed more than once in the configuration
Repository ovirt-4.0-centos-gluster37 is listed more than once in the configuration
Repository ovirt-4.0-patternfly1-noarch-epel is listed more than once in the configuration
Repository virtio-win-stable is listed more than once in the configuration
Repository ovirt-4.0 is listed more than once in the configuration
Loading mirror speeds from cached hostfile
* ovirt-4.0-epel: epel.besthosting.ua



How can I fix it without reinstalling all my nodes?

Thx Christian

Von: Fabian Deutsch [mailto:fdeutsch at redhat.com]
Gesendet: Mittwoch, 31. August 2016 12:08
An: Sandro Bonazzola <sbonazzo at redhat.com>
Cc: Grundmann, Christian <Christian.Grundmann at fabasoft.com>; users <users at ovirt.org>
Betreff: Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

On Wed, Aug 31, 2016 at 11:26 AM, Fabian Deutsch <fdeutsch at redhat.com<mailto:fdeutsch at redhat.com>> wrote:
On Wed, Aug 31, 2016 at 11:23 AM, Sandro Bonazzola <sbonazzo at redhat.com<mailto:sbonazzo at redhat.com>> wrote:


On Wed, Aug 31, 2016 at 10:15 AM, Grundmann, Christian <Christian.Grundmann at fabasoft.com<mailto:Christian.Grundmann at fabasoft.com>> wrote:
Hi,
I used the iso "ovirt-node-ng-installer-ovirt-4.0-2016082904.iso" from http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/
I attached the nodes in my Engine (4.0.3)
Engine shows, oVirt Node 4.0.2
After a few minutes Engine tells me there is a update for the node
I did the update
And now the Node is  4.0.1!

How can I get the right updates?

Fabian, how can this happen?

Btw, 4.0.3 iso has been published yesterday: http://resources.ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ovirt-node-ng-installer-ovirt-4.0-2016083011.iso


Hey Christian and Sandro,
thanks for reporting this.
I'm looking into it.

So - We did have some problems until Monday where the versions were mixde up between ovirt-4.0, -pre and -snapshot.
I suppose that this caused the glithc you were seeing, Christian.
I've downloaded
http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/lastSuccessfulBuild/artifact/exported-artifacts/ovirt-node-ng-installer-ovirt-4.0-2016083104.iso
and could not reproduce this issue.
- fabian



- fabian




Thx Christian



-----Ursprüngliche Nachricht-----
Von: users-bounces at ovirt.org<mailto:users-bounces at ovirt.org> [mailto:users-bounces at ovirt.org<mailto:users-bounces at ovirt.org>] Im Auftrag von Fabian Deutsch
Gesendet: Montag, 29. August 2016 10:52
An: Thomas Klute <klute at ingenit.com<mailto:klute at ingenit.com>>
Cc: users <users at ovirt.org<mailto:users at ovirt.org>>
Betreff: Re: [ovirt-users] Stable Next Generation Node Image for 4.0.2?

On Wed, Aug 24, 2016 at 2:09 PM, Thomas Klute <klute at ingenit.com<mailto:klute at ingenit.com>> wrote:
> Dear oVirt community,
>
> what is the correct way to set up a next generation node of the latest
> stable version (4.0.2)?

Hey Thomas,

let me get back to this question at the end …

> Take the image from
> http://resources.ovirt.org/pub/ovirt-4.0/iso/ovirt-node-ng-installer/ ?
> Seems to be 4.0.0 and then update?

This is the URL yuo want - It contains the builds based on the latest stable release.

Tho I see that it wasn't updated lately.
Sandro, can we publish a new ISO for 4.0.3?

In the mean time you can take the iso from http://jenkins.ovirt.org/job/ovirt-node-ng_ovirt-4.0_build-artifacts-el7-x86_64/
Which is building the stable isos

> Or take the image from
> http://resources.ovirt.org/pub/ovirt-4.0-snapshot/iso/
> Seems to be 4.0.2 but nightly and thus unstable?

Yep, these are nightly builds, and probably unstable.

- fabian

> Thanks for the clarification,
> best regards,
>  Thomas
>
> _______________________________________________
> Users mailing list
> Users at ovirt.org<mailto:Users at ovirt.org>
> http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at ovirt.org<mailto:Users at ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users
_______________________________________________
Users mailing list
Users at ovirt.org<mailto:Users at ovirt.org>
http://lists.ovirt.org/mailman/listinfo/users



--
Sandro Bonazzola
Better technology. Faster innovation. Powered by community collaboration.
See how it works at redhat.com<http://redhat.com>
[http://images.engage.redhat.com/EloquaImages/clients/RedHat/%7B53f97a34-013e-4b79-966f-222f50a6de8c%7D_Red_Hat_Open_Source_Day_2_CITIES.png]<https://www.redhat.com/it/about/events/red-hat-open-source-day-2016>



--
Fabian Deutsch <fdeutsch at redhat.com<mailto:fdeutsch at redhat.com>>
RHEV Hypervisor
Red Hat



--
Fabian Deutsch <fdeutsch at redhat.com<mailto:fdeutsch at redhat.com>>
RHEV Hypervisor
Red Hat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.ovirt.org/pipermail/users/attachments/20160831/d1f0558e/attachment-0001.html>


More information about the Users mailing list