[ovirt-users] Cannot login after upgrade from 3.5 to 3.6

Martin Perina mperina at redhat.com
Thu Jan 28 10:59:02 UTC 2016 


----- Original Message -----
> From: "Eli Mesika" <emesika at redhat.com>
> To: "Martin Perina" <mperina at redhat.com>
> Cc: "Moti Asayag" <masayag at redhat.com>, "Allon Mureinik" <amureini at redhat.com>, "users" <users at ovirt.org>, "Amador
> Pahim" <apahim at redhat.com>, "Marcelo Leandro" <marceloltmm at gmail.com>
> Sent: Thursday, January 28, 2016 11:55:56 AM
> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> 
> 
> 
> ----- Original Message -----
> > From: "Martin Perina" <mperina at redhat.com>
> > To: "Moti Asayag" <masayag at redhat.com>, "Allon Mureinik"
> > <amureini at redhat.com>
> > Cc: "Eli Mesika" <emesika at redhat.com>, "users" <users at ovirt.org>, "Amador
> > Pahim" <apahim at redhat.com>, "Marcelo
> > Leandro" <marceloltmm at gmail.com>
> > Sent: Wednesday, January 27, 2016 2:31:20 PM
> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > 
> > So now I finally understand the issue:
> > 
> > When you try to login, CommandBase tries to execute LoginCommand, but
> > before the command execution it loads content of commands cache and
> > here comes the issue: there's stored AddVmFromSnapshotCommand which
> > contains DiskImage as a parameter and DiskImage implementation has
> > changed between 3.5 and 3.6.
> > 
> > Moti, is there some way how to clean up commands cache so it doesn't
> > contain those 3.5 commands?
> > 
> > Also should those situation be covered during engine upgrades?
> 
> Martin, is this a left over in the command_entities table that caused the
> failure while the entity is deserialized ?

Probably, because this DiskImage.Id serialization exception started to appear
after upgrade from 3.5. Is there any way how to verify and clean up?

> 
> > 
> > Thanks
> > 
> > Martin
> > 
> > 
> > ----- Original Message -----
> > > From: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > To: "Martin Perina" <mperina at redhat.com>
> > > Cc: "Eli Mesika" <emesika at redhat.com>, "users" <users at ovirt.org>, "Amador
> > > Pahim" <apahim at redhat.com>
> > > Sent: Wednesday, January 27, 2016 1:08:19 PM
> > > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > > 
> > > The server  just in time  isolate from the network,is it a problem?
> > > thats ok?
> > > 
> > > follows the logs:
> > > 
> > > server.log:
> > > https://copy.com/Eni9adZSCjyMZNFN
> > > 
> > > engine.log:
> > > https://copy.com/ayczW9ipHdW4BWni
> > > 
> > > 2016-01-27 5:32 GMT-03:00 Martin Perina <mperina at redhat.com>:
> > > > Hi,
> > > >
> > > > according to the test of login by ovirt-engine-extensions-tool you were
> > > > logged in
> > > > successfully, so there shouldn't be any issues logging into engine
> > > > using
> > > > admin at internal ...
> > > >
> > > > Unfortunately both engine.log and server.log ends on Jan 22th and I'd
> > > > really
> > > > like to see up-to-date logs.
> > > >
> > > > So if you still cannot login into webadmin please do following:
> > > >
> > > > 1. Stop engine service
> > > >
> > > >      systemctl stop ovirt-engine
> > > >
> > > >    or
> > > >
> > > >      service ovirt-engine stop
> > > >
> > > >
> > > > 2. Rotate logs
> > > >
> > > >    cd /var/log/ovirt-engine
> > > >    mv engine.log engine-20160127.log
> > > >    mv server.log server-20160127.log
> > > >
> > > >
> > > > 3. Start engine
> > > >
> > > >      systemctl start ovirt-engine
> > > >
> > > >    or
> > > >
> > > >      service ovirt-engine start
> > > >
> > > >
> > > > 4. Try to login as admin with domain internal using webadmin
> > > >
> > > >
> > > > 5. Try to login as admin at internal using REST API by
> > > >    accessing
> > > >
> > > >      http://SERVER/ovirt-engine/api/datacenters
> > > >
> > > >    Into user please enter full username: admin at internal
> > > >
> > > >
> > > > When done please attach latest server.log and engine.log
> > > >
> > > >
> > > > Thanks a lot
> > > >
> > > > Martin Perina
> > > >
> > > >
> > > > ----- Original Message -----
> > > >> From: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > >> To: "Martin Perina" <mperina at redhat.com>
> > > >> Cc: "Eli Mesika" <emesika at redhat.com>, "users" <users at ovirt.org>,
> > > >> "Amador
> > > >> Pahim" <apahim at redhat.com>
> > > >> Sent: Tuesday, January 26, 2016 8:46:12 PM
> > > >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to 3.6
> > > >>
> > > >> hello,
> > > >>
> > > >> setup.log:
> > > >> https://copy.com/lIYzccOnwCiW7e9q
> > > >>
> > > >> and output the command :
> > > >> https://copy.com/7psvpyUzUq0FKW31
> > > >>
> > > >> error screen when i try to login on webadmin:
> > > >> https://copy.com/CfKZePnGFmIwF7B8
> > > >>
> > > >> Thanks
> > > >>
> > > >> 2016-01-26 12:24 GMT-03:00 Martin Perina <mperina at redhat.com>:
> > > >> > And also could you try to login using extension test tool:
> > > >> >
> > > >> >   ovirt-engine-extensions-tool aaa login-user --profile=internal
> > > >> >   --user-name=admin --password=interactive:
> > > >> >
> > > >> > and post the output of the command.
> > > >> >
> > > >> > Thanks a lot
> > > >> >
> > > >> > Martin Perina
> > > >> >
> > > >> > ----- Original Message -----
> > > >> >> From: "Martin Perina" <mperina at redhat.com>
> > > >> >> To: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > >> >> Cc: "Eli Mesika" <emesika at redhat.com>, "users" <users at ovirt.org>,
> > > >> >> "Amador
> > > >> >> Pahim" <apahim at redhat.com>
> > > >> >> Sent: Tuesday, January 26, 2016 4:12:21 PM
> > > >> >> Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
> > > >> >> 3.6
> > > >> >>
> > > >> >> Could you please share also your server.log?
> > > >> >>
> > > >> >> Thanks
> > > >> >>
> > > >> >> Martin Perina
> > > >> >>
> > > >> >> ----- Original Message -----
> > > >> >> > From: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > >> >> > To: "Martin Perina" <mperina at redhat.com>
> > > >> >> > Cc: "Eli Mesika" <emesika at redhat.com>, "users" <users at ovirt.org>,
> > > >> >> > "Amador
> > > >> >> > Pahim" <apahim at redhat.com>
> > > >> >> > Sent: Tuesday, January 26, 2016 4:03:16 PM
> > > >> >> > Subject: Re: [ovirt-users] Cannot login after upgrade from 3.5 to
> > > >> >> > 3.6
> > > >> >> >
> > > >> >> > And here the engine.log:
> > > >> >> > https://copy.com/TWjgIu7KwSkcmRZ8
> > > >> >> >
> > > >> >> > the log started 2016-01-19.
> > > >> >> >
> > > >> >> > 2016-01-26 11:57 GMT-03:00 Marcelo Leandro
> > > >> >> > <marceloltmm at gmail.com>:
> > > >> >> > > I didn't change nothing on jan 20th and it happened on 22th.
> > > >> >> > > I can't login into the web admin.
> > > >> >> > >
> > > >> >> > > Thanks
> > > >> >> > >
> > > >> >> > > 2016-01-26 9:55 GMT-03:00 Martin Perina <mperina at redhat.com>:
> > > >> >> > >> Hi Marcelo,
> > > >> >> > >>
> > > >> >> > >> sorry for late response, too many tasks on me at the moment
> > > >> >> > >> :-(
> > > >> >> > >>
> > > >> >> > >> As Eli said important issues started at 2016-01-20, but
> > > >> >> > >> engine-setup
> > > >> >> > >> log you posted is dated at 2016-01-22. So, did you perform any
> > > >> >> > >> upgrade on important configuration changed on Jan 20th? If so
> > > >> >> > >> could
> > > >> >> > >> you please share also this setup log?
> > > >> >> > >>
> > > >> >> > >> Regarding login: I haven't found any issue logging, I see many
> > > >> >> > >> successful
> > > >> >> > >> logins of admin at internal in the log. So are you able to login
> > > >> >> > >> into
> > > >> >> > >> webadmin
> > > >> >> > >> or not?
> > > >> >> > >>
> > > >> >> > >> Thanks
> > > >> >> > >>
> > > >> >> > >> Martin Perina
> > > >> >> > >>
> > > >> >> > >> ----- Original Message -----
> > > >> >> > >>> From: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > >> >> > >>> To: "Eli Mesika" <emesika at redhat.com>
> > > >> >> > >>> Cc: "Martin Perina" <mperina at redhat.com>, "users"
> > > >> >> > >>> <users at ovirt.org>,
> > > >> >> > >>> "Amador Pahim" <apahim at redhat.com>
> > > >> >> > >>> Sent: Tuesday, January 26, 2016 12:27:55 PM
> > > >> >> > >>> Subject: Re: [ovirt-users] Cannot login after upgrade from
> > > >> >> > >>> 3.5
> > > >> >> > >>> to
> > > >> >> > >>> 3.6
> > > >> >> > >>>
> > > >> >> > >>> Martins, can you help me ? I can't administer my environment.
> > > >> >> > >>>
> > > >> >> > >>> 2016-01-25 8:30 GMT-03:00 Eli Mesika <emesika at redhat.com>:
> > > >> >> > >>> > Adding Martin
> > > >> >> > >>> >
> > > >> >> > >>> > There are some aaa errors before that, but first
> > > >> >> > >>> > significant
> > > >> >> > >>> > error
> > > >> >> > >>> > is
> > > >> >> > >>> > in
> > > >> >> > >>> > 2016-01-20 00:14:55,002
> > > >> >> > >>> > Can you take a look ?
> > > >> >> > >>> >
> > > >> >> > >>> > ----- Original Message -----
> > > >> >> > >>> >> From: "Marcelo Leandro" <marceloltmm at gmail.com>
> > > >> >> > >>> >> To: "Eli Mesika" <emesika at redhat.com>
> > > >> >> > >>> >> Cc: users at ovirt.org, "Amador Pahim" <apahim at redhat.com>
> > > >> >> > >>> >> Sent: Sunday, January 24, 2016 1:48:04 PM
> > > >> >> > >>> >> Subject: Re: [ovirt-users] Cannot login after upgrade from
> > > >> >> > >>> >> 3.5
> > > >> >> > >>> >> to
> > > >> >> > >>> >> 3.6
> > > >> >> > >>> >>
> > > >> >> > >>> >> It's here : https://copy.com/TWjgIu7KwSkcmRZ8
> > > >> >> > >>> >>
> > > >> >> > >>> >>
> > > >> >> > >>> >> ----- Original Message -----
> > > >> >> > >>> >> > From: "Amador Pahim" <apahim at redhat.com>
> > > >> >> > >>> >> > To: "Marcelo Leandro" <marceloltmm at gmail.com>,
> > > >> >> > >>> >> > users at ovirt.org
> > > >> >> > >>> >> > Cc: emesika at redhat.com
> > > >> >> > >>> >> > Sent: Friday, January 22, 2016 7:08:20 PM
> > > >> >> > >>> >> > Subject: Re: [ovirt-users] Cannot login after upgrade
> > > >> >> > >>> >> > from
> > > >> >> > >>> >> > 3.5
> > > >> >> > >>> >> > to
> > > >> >> > >>> >> > 3.6
> > > >> >> > >>> >> >
> > > >> >> > >>> >> > On 01/22/2016 03:03 PM, Marcelo Leandro wrote:
> > > >> >> > >>> >> > > After engine-setup from
> > > >> >> > >>> >> > > ovirt-engine-3.5.6.2-1.el7.centos
> > > >> >> > >>> >> > > to
> > > >> >> > >>> >> > > ovirt-engine-3.6.1.3-1.el7.centos, I'm not able to
> > > >> >> > >>> >> > > login
> > > >> >> > >>> >> > > anymore.
> > > >> >> > >>> >> > > The
> > > >> >> > >>> >> > > engine.log say
> > > >> >> > >>> >> > > Caused by:
> > > >> >> > >>> >> > > org.codehaus.jackson.map.JsonMappingException:
> > > >> >> > >>> >> > > Invalid
> > > >> >> > >>> >> > > type
> > > >> >> > >>> >> > > id
> > > >> >> > >>> >> > > 'org.ovirt.engine.core.common.businessentities.DiskImage'
> > > >> >> > >>> >> > > (for
> > > >> >> > >>> >> > > id
> > > >> >> > >>> >> > > type 'Id.class'): no such class found (through
> > > >> >> > >>> >> > > reference
> > > >> >> > >>> >> > > chain:
> > > >> >> > >>> >> > >
> > > >> >> > >>> >> org.ovirt.engine.core.common.action.AddVmFromSnapshotParameters["vm"]->org.ovirt.engine.core.common.businessentities.VM["diskList"])
> > > >> >> > >>> >> >
> > > >> >> > >>> >> > hmm, I see a similar msg here:
> > > >> >> > >>> >> > http://lists.ovirt.org/pipermail/devel/2015-July/010976.html
> > > >> >> > >>> >> >
> > > >> >> > >>> >> > Not sure if related. Eli? Any thoughts here?
> > > >> >> > >>> >>
> > > >> >> > >>> >> I don't think it is related ...
> > > >> >> > >>> >> Amador, can you please attach a full engine log ?
> > > >> >> > >>> >>
> > > >> >> > >>> >> >
> > > >> >> > >>> >> > >
> > > >> >> > >>> >> > > Here the setup log:
> > > >> >> > >>> >> > > https://copy.com/YBddV8bg3tnjHnwp
> > > >> >> > >>> >> > >
> > > >> >> > >>> >> > > And here the engine.log:
> > > >> >> > >>> >> > > https://copy.com/TWjgIu7KwSkcmRZ8
> > > >> >> > >>> >> > >
> > > >> >> > >>> >> > > Need urgent assistance. Thank you in advance.
> > > >> >> > >>> >> > >
> > > >> >> > >>> >> > > Best Regards,
> > > >> >> > >>> >> > > Marcelo Leandro
> > > >> >> > >>> >> > > _______________________________________________
> > > >> >> > >>> >> > > Users mailing list
> > > >> >> > >>> >> > > Users at ovirt.org
> > > >> >> > >>> >> > > http://lists.ovirt.org/mailman/listinfo/users
> > > >> >> > >>> >> >
> > > >> >> > >>> >> >
> > > >> >> > >>> >>
> > > >> >> > >>>
> > > >> >> >
> > > >> >>
> > > >>
> > > 
> > 
>

More information about the Users mailing list